ZENL1111 - Ühe kontaktiga plokk, Harmony XALD, XALK, hõbedast sulamist, tagumine paigaldus, kruviklambriga klemm, 1NO - Schneider Electric - Ühe kontaktiga plokk, Harmony XALD, XALK, hõbedast sulamist, tagumine paigaldus, kruviklambriga klemm, 1NO - Schneider Electric - 0

Tellimisel

ZENL1111 – Schneider Electric

EAN: 3389110115079

4,02 € KM-ta

4,99 € KM-ga

Ühe kontaktiga plokk, Harmony XALD, XALK, hõbedast sulamist, tagumine paigaldus, kruviklambriga klemm, 1NO - Schneider Electric

BaltElec ladu

Laost otsas

Tarnija ladu

Laos

Olemas, oodata 5-7 päeva pärast

Korvis

4,99 €

SPETSIFIKATSIOONID

Default

Seeria Harmony XALD, XALK

Main

product range Harmony XAL
Harmony XAPS

name of the device ZENL

type of product or equipment contact pad

[ui] rated insulation voltage 600 V (pollution degree 3) conforming to EN/IEC 60947-1

destination of the product For XB5 Ø 22 mm control and signaling units
For XAPS control station

sale by indivisible quantity 5

Complementary

electrical composition code SR1 (quantity <= 3)
SR2 (quantity <= 2)
MR1 (quantity <= 2)

[ie] rated operational current 3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1
6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1
0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1

[ith] conventional thermal current 10 A conforming to EN/IEC 60947-5-1

contact description 1 "F"

assembly of the block Rear mounting

further information Mounting on the plate integrated into the housing

tightening torque 0.8...1.2 Nm conforming to EN 60947-1

[uimp] rated impulse withstand voltage 6 kV conforming to EN/IEC 60947-1

operating torque 0.05 Nm electrical state changed by "F"

product weight 0,015 kg

actuation stroke 2.6 mm (electrical state modified by "F")
4.3 mm (total stroke)

electrical life 1000000 cycles, AC-15, 2 A at 230 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, AC-15, 3 A at 120 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, AC-15, 4 A at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, DC-13, 0.2 A at 110 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, DC-13, 0.5 A at 24 V, operating rate <3600 cyc/h, load factor: 0, 5 conforming to EN/IEC 60947-5-1 appendix C

connection mode Screw clamp terminals, <= 2 x 1.5mm² with cable end conforming to EN/IEC 60947-1
Screw clamp terminals, >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1

contact operation Slow-action

contact material Silver alloy (Ag/Ni)

mechanical endurance 10000000 cycle

electrical reliability Λ < 10exp(-6) at 5 V and 1 mA in healthy environment conforming to EN/IEC 60947-5-4
Λ < 10exp(-8) at 17 V and 5 mA conforming to EN/IEC 60947-5- 4

actuation force 2.3 N electrical state modified by "F"

screw head shape Transversal compatible with Phillips n° 1 screwdriver
Transversal compatible with pozidriv n°1 screwdriver
Perforated compatible with flat Ø 4 mm screwdriver
Perforated compatible with flat Ø 5.5 mm screwdriver

positive aperture Without

maximum resistance between terminals 25 MΩ

short circuit protection 10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1

construction options For assembly by the customer

Environment

ip degree of protection IP20 conforming to IEC 60529

operating ambient temperature -40…70 °C

standards EN/CEI 60947-5-1
CSA C22.2 No 14
EN/CEI 60947-1
UL 508
EN/CEI 60947-5-5
JIS C8201-5-1
EN/CEI 60947-5-4
JIS C8201-1

storage room temperature -40…70 °C

mechanical shock resistance 30 gn (duration = 18 ms) for acceleration on 1/2 sinusoid conforming to IEC 60068-2-27
50 gn (duration = 11 ms) for acceleration on 1/2 sinusoid conforming to IEC 60068-2-27

vibration resistance 5 gn (f= 12...500 Hz) conforming to IEC 60068-2-6

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric ZENL1111 on toode kategooriast Juhtimisjaamad, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele ZENL1111 - Schneider Electric

Kas BaltElec pakub ZENL1111 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: ZENL1111, Schneider Electric, 10tk), et koostaksime projekti pakkumise.
Milline on ZENL1111 saadavus ja tarne Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja partii saadavusest; kinnitame pakkumisega.
Kas ZENL1111 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas ZENL1111 sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; projektid ja suuremad kogused hinnastame eraldi.

Hiljuti vaadatud

ZENL1111 - Schneider Electric

Ühe kontaktiga plokk, Harmony XALD, XALK, hõbedast sulamist, tagumine paigaldus, kruviklambriga klemm, 1NO

4,02 € KM-ta

4,99 € KM-ga

Tellimisel Tarnija laos

Korvis