LC1F265 - kontaktor, TeSys F, 3P(3NO)-AC-3, <=440 V 265 A mähisega LX1/LX9 -24...1000V AC 40/400Hz, LX4 -24...460V DC, LXE -100...250V AC 50/60Hz või 100...380V DC. - Schneider Electric - kontaktor, TeSys F, 3P(3NO)-AC-3, <=440 V 265 A mähisega LX1/LX9 -24...1000V AC 40/400Hz, LX4 -24...460V DC, LXE -100...250V AC 50/60Hz või 100...380V DC. - Schneider Electric - 0

LC1F265 – Schneider Electric

Tellitav

EAN: 3389110122459

698,75 € KM-ta

866,45 € KM-ga

kontaktor, TeSys F, 3P(3NO)-AC-3, <=440 V 265 A mähisega LX1/LX9 -24...1000V AC 40/400Hz, LX4 -24...460V DC, LXE -100...250V AC 50/60Hz või 100...380V DC. - Schneider Electric

Korvis

866,45 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Range TeSys

[uc] control circuit voltage 24...1000 V AC 40...400 Hz with coil LX1/LX9
24...460 V DC with coil LX4
100...250 V AC 50/60 Hz with coil LXE
100...380 V with coil LXE

job category AC-3
AC-4
AC-1

name of the device LC1F

switch application Resistive load (AC-1)
Motor control (AC-3)

type of product or equipment contactor

Product Name TeSys F

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C

composition of the power pole contacts 3F

motor power kW 132 kW at 380...400 V AC 50/60 Hz (AC-3)
140 kW at 415 V AC 50/60 Hz (AC-3)
140 kW at 440 V AC 50/60 Hz (AC-3)
147 kW at 1000 V AC 50/60 Hz (AC-3)
160 kW at 500 V AC 50/60 Hz (AC-3)
75 kW at 220...240 V AC 50/60 Hz (AC-3)
160 kW à 660...690 V AC 50/60 Hz (AC-3)
51 kW à 400 V AC 50/60 Hz (AC-4)

average impedance 0,3 mOhm - Ith 350 A 50 Hz

Complementary

[ie] rated operational current 350 A (at <40°C) at <= 440 V AC AC-1
265 A (at <55°C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC-1
<= 690 V AC-3
<= 690 V AC-4
<= 460 V CC

compatibility code LC1F

[ics] rated service breaking capacity 2120 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 2200 A at <40°C - 10 s
1230 A at <40°C - 30 s
950 A at <40°C - 1 min
620 A at <40°C - 3 min
480 A at <40°C - 10 min

[ith] conventional thermal current 350A at <40°C)

caliber of the fuse to be associated 315 A aM at <= 440 V
400 A gG at <= 440 V

Handle front plate colour 203 mm

tightening torque Power circuit: 35 Nm
Remote control: 1.2 Nm
Remote control: 0.6 Nm

[uimp] rated impulse withstand voltage 8 kV

average fuel consumption when going 8…10 VA
3.68…4.53 VA
4.5…7.0 VA
2.5…4.0 VA

product weight 8,54 kg

average consumption on call going 600…700 VA, 40...400 Hz cos phi 0.9 (at 20 °C) with LX1/LX9 coil
655…803 VA (at 20 °C) with LX4 coil
300…350 VA, 50/60 Hz cos phi 0.5 (at 20 °C) with LXE coil
300…310 VA (at 20 °C) with LXE coil

connection mode Power circuit: bar 2 cable(s) - busbar section: 32 x 4 mm
Power circuit: ring terminals 1 cable(s) 240 mm²
Power circuit: connector 1 cable(s) 240 mm²
Power circuit : connection by bolting
Remote control: screw clamp terminals 1 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm² flexible with cable end
Remote control: screw terminal blocks clamp 1 cable(s) 1...4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1...2.5 mm²rigid without cable end
Remote control: screw clamp terminals 1 cable(s) 1... 4 mm²
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²
Remote control: screw clamp terminals 1.0 cable(s) 0.2...2.5 mm²flexible without cable end
Remote control: screw clamp terminals 1.0 cable(s) 0.25...2.5 mm²flexible with cable end cable
cross-section Remote control: screw clamp terminals 1.0 cable(s) 0.2...2.5 mm²rigid without cable end

control circuit voltage range Operational: 0.85…1.1 Uc AC 40...400 Hz
Level drop: 0.35...0.55 Uc AC 40...400 Hz
Operational: 0.85…1.1 Uc DC
Level drop : 0.15...0.2 Uc DC
Operational: 85...275 V AC 50/60 Hz
Dropout: 0...60 V AC 50/60 Hz
Operational: 85...418 V DC
Dropout : 0...45 V DC

mechanical endurance 10 Mcycles

width (w) 201,5 mm

mechanical robustness Open contactor vibrations: 2 Gn, 5 to 300 Hz
Closed contactor vibrations: 5 Gn, 5 to 300 Hz
Open contactor shocks: 6 Gn for 1/2 sine wave (11 ms)
Closed contactor shocks: 15 Gn for 1/2 sine wave( 11ms)

rated rms inrush power 2650 A AC conforming to IEC 60947-4-1

depth 213 mm

mounting bracket Platinum

operating time 40…65 ms closing for with LX1/LX9 coil
100…170 ms opening for with LX1/LX9 coil
40…50 ms closing for with LX4 coil
40…65 ms opening for with LX4 coil
40…80 ms closing for with LXE
6 coil ...54 ms opening for with LXE coil

power loss per pole 37 W AC-1
21 W AC-3

max command speed 2400 cycles/h at <55°C

Poles description 3P

Environment

ip degree of protection IP20 front face with protectors conforming to IEC 60529
IP20 front face with protectors conforming to VDE 0106

operating altitude 3000 m without current reduction

product certificates ABS
CB
DNV
RMRoS
UL
CSA
RINA
LROS (Lloyds register of shipping)
BV
UKCA

ambient air temperature for operation -40…70 °C

operating ambient temperature -5…55 °C

overvoltage category III

standards CEI 60947-1
CEI 60947-4-1
JIS C8201-4-1
EN 60947-1
EN 60947-4-1

thermal dissipation 8 W
2,2…2,5 W

storage room temperature -60…80 °C

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F265 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F265 - Schneider Electric

Kas BaltElec pakub LC1F265 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1F265, 5tk), et koostaksime personaalse pakkumise.
Milline on LC1F265 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja partii saadavusest; kinnitame pakkumisega.
Kas LC1F265 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F265 sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F265 - Schneider Electric

kontaktor, TeSys F, 3P(3NO)-AC-3, <=440 V 265 A mähisega LX1/LX9 -24...1000V AC 40/400Hz, LX4 -24...460V DC, LXE -100...250V AC 50/60Hz või 100...380V DC.

698,75 € KM-ta

866,45 € KM-ga

Tellitav

Korvis