ATV212HD15N4 – Schneider Electric
Tellitav
EAN: 3606480322525
1 308,58 € KM-ta
1 622,64 € KM-ga
Altivar - ATV212 muutuva kiirusega ajam - 3ph - 15kW - 20hp - 480V - EMC - IP21 - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
Altivar 212
Main
product range
Altivar 212
product specific application
HVAC pumps and fans
name of the device
ATV212
type of product or equipment
Speed variator
optional card
Communication card for LonWorks
destination of the product
Asynchronous motors
emc filter
Built-in EMC Class C2 filter
number of network phases
3 phases
service communication
Timeout setting from 0.1 to 100 s
Read device identification (43)
Inhibitory
watchdog Write single register (06)
Write multiple registers (16) 2 words maximum
Read holding registers (03) 2 words maximum
Read device identification (43)
Inhibitory
watchdog Write single register (06)
Write multiple registers (16) 2 words maximum
Read holding registers (03) 2 words maximum
communication protocol
BACnet
Modbus
METASYS N2
APOGEE FLN
LonWorks
Modbus
METASYS N2
APOGEE FLN
LonWorks
engine power hp
20 hp
motor power kW
15 kW
Complementary
feed
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection
Internal supply: 24 V DC (21… 27 V), <200 A, protection type: overload and short circuit protection
Internal supply: 24 V DC (21… 27 V), <200 A, protection type: overload and short circuit protection
[un] rated nominal voltage
380…480 V - 15...10%
specific application
HVAC
maximum switching current
5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 sc (FL, R)
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 sc (FL, R)
response time
FM 2 ms, tolerance +/- 0.5 ms for analog output(s)
FLA, FLC 7 ms, tolerance +/- 0.5 ms for digital output(s)
FLB, FLC 7 ms, tolerance +/- 0, 5 ms for digital output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for digital output(s)
FLA, FLC 7 ms, tolerance +/- 0.5 ms for digital output(s)
FLB, FLC 7 ms, tolerance +/- 0, 5 ms for digital output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for digital output(s)
data formats
8 bits, 1 stop bit, odd, even or non-configurable parity bits
Handle front plate colour
330 mm
tightening torque
0.6 Nm (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
4.5 Nm, 40 psi (L1/R, L2/S, L3/T)
4.5 Nm, 40 psi (L1/R, L2/S, L3/T)
minimum switching current
3 mA at 24 V DC for configurable logic relay
product weight
11,65 kg
marking
THIS
output voltage
<= supply voltage
width (w)
245 mm
network frequency
47,5…63 Hz
power frequency
50...60 Hz - 5...5 %
supply voltage limits
323…528V
switching frequency
6...16 kHz adjustable
12...16 kHz with reduction factor
12...16 kHz with reduction factor
Local signalling
for DC bus powered 1 LED (red)
motor slip compensation
Automatic whatever the load
Not available for motor control in voltage/frequency ratio
Adjustable
Not available for motor control in voltage/frequency ratio
Adjustable
physical interface
2-wire RS 485
functionality
AVERAGE
prospective line short-circuit current
22 kA
connector type
1 open style
1 RJ45
1 RJ45
depth
190 mm
line current
22.8A at 480V
28.5A at 380V
28.5A at 380V
motor power range ac - 3
15…25 kW at 380…440 V 3 phases
15…25 kW at 480…500 V 3 phases
15…25 kW at 480…500 V 3 phases
power dissipation in w
625W
continuous output current
30.5A at 380V
30.5A at 460V
30.5A at 460V
isolation
Electrical between power and control
logic input
Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
Negative logic (sink) (F, R, RES), >= 16 V (state 0 ), <= 10 V (state 1)
Negative logic (sink) (F, R, RES), >= 16 V (state 0 ), <= 10 V (state 1)
maximum transient current
33.6A for 60s
electrical connection
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: bornier 2,5 mm² / AWG 14
L1/R, L2/S, L3/T: bornier 25 mm² / AWG 3
L1/R, L2/S, L3/T: bornier 25 mm² / AWG 3
sampling time
2 ms +/- 0.5 ms F digital
2 ms +/- 0.5 ms R digital
2 ms +/- 0.5 ms RES digital
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- - 0.5ms analog VIB
2 ms +/- 0.5 ms R digital
2 ms +/- 0.5 ms RES digital
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- - 0.5ms analog VIB
standstill braking
4 x 2,5 mm² + 2 x 1 mm² + 2 x 0,14 mm²
linearity error
VIA: +/- 0.15% of maximum value for input
VIB: +/- 0.15% of maximum value for input
FM: +/-0.2% for output
VIB: +/- 0.15% of maximum value for input
FM: +/-0.2% for output
mounting position
Vertical +/- 10 degrees
nominal switching frequency
12 kHz
dielectric strength
3535 V DC between ground and power supply terminals
5092 V DC between control and power supply terminals
5092 V DC between control and power supply terminals
kind of protection
Overheating protection: drive
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and ground: drive
Overvoltage on the DC bus: drive
Break on the control circuit: drive
Against speed limit exceeded: drive
Power supply overvoltage or undervoltage: drive
Power supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor Motor
phase loss: motor
With PTC probes: engine
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and ground: drive
Overvoltage on the DC bus: drive
Break on the control circuit: drive
Against speed limit exceeded: drive
Power supply overvoltage or undervoltage: drive
Power supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor Motor
phase loss: motor
With PTC probes: engine
motor starter type
Speed variator
variable speed drive output frequency
0,5…200 Hz
number of analog inputs
2
construction options
With heat sink
number of analog outputs
1
speed range
1…10
number of logic outputs
2
precision
+/- 0.6% (VIA) for a temperature variation of 60°C
+/- 0.6% (VIB) for a temperature variation of 60°C
+/- 1% (FM) for a variation of temperature of 60°C
+/- 0.6% (VIB) for a temperature variation of 60°C
+/- 1% (FM) for a variation of temperature of 60°C
baud rate
9600 bps or 19200 bps
control profile for asynchronous motor
Flux vector control without sensor, standard
Voltage/frequency ratio, 2 points
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio - Energy saving, quadratic U/f
Voltage/frequency ratio, 5 points
Voltage/frequency ratio, 2 points
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio - Energy saving, quadratic U/f
Voltage/frequency ratio, 5 points
torque accuracy
+/- 15%
apparent power
23.2kVA at 380V
number of addresses
1…247
variable speed drive application selection
Scroll Compressor Building - HVAC
Fan Building - HVAC
Pump Building - HVAC
Fan Building - HVAC
Pump Building - HVAC
acceleration and deceleration ramps
Separately linearly adjustable from 0.01 to 3200 s
Automatic depending on the load
Automatic depending on the load
transient overtorque
120% of nominal motor torque +/- 10% for 60 s
analog input type
VIA configurable voltage by microswitch: 0...10 V DC 24 V max, impedance: 30000 Ohm, 10-bit resolution
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, 10-bit resolution
VIB probe Configurable PTC: 0 to 6 probes, impedance: 1500 Ohm
VIA configurable switching current: 0...20 mA, impedance: 250 Ohm, 10 bit resolution
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, 10-bit resolution
VIB probe Configurable PTC: 0 to 6 probes, impedance: 1500 Ohm
VIA configurable switching current: 0...20 mA, impedance: 250 Ohm, 10 bit resolution
logic input type
F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
analog output type
FM voltage configurable by microswitch 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits
FM switching current configurable 0...20 mA, impedance: 970 Ohm, resolution 10 bits
FM switching current configurable 0...20 mA, impedance: 970 Ohm, resolution 10 bits
logic output type
Configurable relay logic: (FLA, FLC) "NO" - 100000 cycles
Configurable relay logic: (FLB, FLC) "O" - 100000 cycles
Configurable relay logic: (RY, RC) "NO" - 100000 cycles
Configurable relay logic: (FLB, FLC) "O" - 100000 cycles
Configurable relay logic: (RY, RC) "NO" - 100000 cycles
frequency resolution
Display unit: 0.1 Hz
Analog input: 0.024/50 Hz
Analog input: 0.024/50 Hz
cable type
Without mounting kit: 1 wire(s)IEC cable at 45°C, copper 90°C / XLPE/EPR
Without mounting kit: 1 wire(s)IEC cable at 45°C, copper 70°C / PVC
With kit UL type 1: 3 wire(s)UL 508 cable at 40°C, copper 75°C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45°C, copper 70°C / PVC
With kit UL type 1: 3 wire(s)UL 508 cable at 40°C, copper 75°C / PVC
transmission frame
RTU
polarization type
No impedance
Environment
degree of pollution
2 conforming to IEC 61800-5-1
environment characteristic
Classes 3C1 conforming to IEC 60721-3-3
Classes 3S2 conforming to IEC 60721-3-3
Classes 3S2 conforming to IEC 60721-3-3
ip degree of protection
IP21
operating altitude
1000…3000 m limited to 2000 m for grounded corner distribution network with current reduction of 1% every 100 m
<= 1000 m without derating
<= 1000 m without derating
product certificates
CSA
UL
C-Tick
NOM 117
UL
C-Tick
NOM 117
electromagnetic compatibility
Electrostatic discharge immunity test level 3 conforming to IEC 6100-4-11 Radiated
radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
standards
IEC 61800-3 category C2
EN 61800-3 category C3
IEC 61800-3 category C3
IEC 61800-5-1
EN 61800-3 environments 2 category C1
EN 55011 class A group 1
IEC 61800-3 environments 2 category C2
EN 61800-3 environments 2 category C2
IEC 61800-3 environments 1 category C2
IEC 61800-3 environments 1 category C3
EN 61800-5-1
UL Type 1
IEC 61800-3 environments 2 category C3
EN 61800-3 category C2
EN 61800-3 environments 1 category C3
IEC 61800-3
EN 61800-3 environments 1 category C2
EN 61800-3 environments 2 category C3
IEC 61800-3 environments 1 category C1
EN 61800-3
IEC 61800-3 environments 2 category C1
EN 61800-3 environments 1 category C1
EN 61800-3 category C3
IEC 61800-3 category C3
IEC 61800-5-1
EN 61800-3 environments 2 category C1
EN 55011 class A group 1
IEC 61800-3 environments 2 category C2
EN 61800-3 environments 2 category C2
IEC 61800-3 environments 1 category C2
IEC 61800-3 environments 1 category C3
EN 61800-5-1
UL Type 1
IEC 61800-3 environments 2 category C3
EN 61800-3 category C2
EN 61800-3 environments 1 category C3
IEC 61800-3
EN 61800-3 environments 1 category C2
EN 61800-3 environments 2 category C3
IEC 61800-3 environments 1 category C1
EN 61800-3
IEC 61800-3 environments 2 category C1
EN 61800-3 environments 1 category C1
control loop
Adjustable PI controller
relative humidity
5...95 % without condensation conforming to IEC 60068-2-3
5...95 % without dripping water conforming to IEC 60068-2-3
5...95 % without dripping water conforming to IEC 60068-2-3
operating ambient air temperature
-10…40 °C (without derating)
40…50 °C (with reduction factor)
40…50 °C (with reduction factor)
storage room temperature
-25…70 °C
mechanical shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
vibration resistance
1.5 mm (f= 3...13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
air flow
206 m3/h
sound intensity
54 dB conforming to 86/188/EEC
insulation resistance
>= 1 MΩ 500 V CC pendant 1 minute
speed accuracy
+/-10% of nominal slip 0.2 Tn to Tn
KKK ja hinna lisateave
ATV212HD15N4 Schneider Electric on lahendus kategooriast Muutuva kiirusega ajamid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.
- Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
- Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
- Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.
Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele ATV212HD15N4 - Schneider Electric
-
Kas BaltElec pakub ATV212HD15N4 jaoks hulgihinda?
Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, ATV212HD15N4, 5tk), et koostaksime projekti pakkumise.
-
Milline on ATV212HD15N4 saadavus ja tarne Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
-
Kas ATV212HD15N4 firmalt Schneider Electric on originaaltoode?
Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
-
Kas ATV212HD15N4 sobib minu projekti?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub tarne ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
ATV212HD15N4 - Schneider Electric
Altivar - ATV212 muutuva kiirusega ajam - 3ph - 15kW - 20hp - 480V - EMC - IP21
1 308,58 € KM-ta
1 622,64 € KM-ga
Tellitav
Teie avaldus on edukalt saadetud