Default
Seeria
Harmony RE/RM
Main
product range
Harmony Control Relay
switching capacity in va
1250 VA
job category
AC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC- 12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
DC-14 conforming to IEC 60947-5-1
type of product or equipment
Current control relay
rated output current
5 A
relay name
RM35JA
[ui] rated insulation voltage
250 V conforming to IEC 60664-1
parameters monitored by the relay
Overcurrent or undercurrent detection
measuring range
0.15 to 1.5 A E1-M terminals
0.5 to 5 A E2-M terminals
1.5 to 15 A E3-M terminals
150 mA...15 A current
threshold setting
10...100%
type of relay
Current control relay
Complementary
[un] rated nominal voltage
24…240 V CA/CC 50/60 Hz +/- 10 %
contact description
2 "O/F"
maximum power consumption in va
3.5 VA AC
maximum switching current
5 A CA/CC
output contacts
2 "OF"
tightening torque
0.6...1 Nm conforming to IEC 60947-1
case material
Self-extinguishing plastic
minimum switching current
10 mA at 5 V DC
product weight
0,13 kg
marking
EC: CEM 89/336/EEC
EC: 73/23/EEC
reset time
1500 ms delay
hysteresis
5…50% threshold setting
connection mode
Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with mouthpiece
safety reliability data
MTTFd = 296.8 years
B10d = 270000
contact material
Sans cadmium
maximum measuring cycle
30 ms measuring cycle as actual rms value
mechanical endurance
30000000 cycle
width (w)
35 mm
control circuit frequency
40...70 Hz +/- 10 %
power-on delay
0,3 s
supply voltage limits
20,4…264 V CA/CC
delay
Adjustable 1…20 s, 0 + 10% on excitation Ti
Adjustable 0.3…30 s, 0 + 10% when exceeding threshold Tt
Local signalling
for power ON LED (green)
for relay on LED (yellow)
measurement error
0.05%/°C with temperature variation
1 per volt over the entire range with voltage variation
measurement accuracy
+/-10% of full scale value
mounting bracket
35 mm symmetrical DIN rail conforming to EN/IEC 60715
electrical stamina
100000 cycle
repeat accuracy
+/- 0.5% for measurement and input circuit
+/- 2% for time delay
mounting position
All positions without derating
maximum power consumption in w
0,6 W CC
polarity
Not CC
resistance between terminals
0.005 Ohm at E3-M terminals
0.015 Ohm at E2-M
terminals 0.05 Ohm at E1-M terminals
command speed
<= 360 operations/hour full load
operating voltage tolerance
- 15 % + 10 % And
maximum cut-off voltage
250 V CA/CC
Environment
degree of pollution
3 conforming to IEC 60664-1
ip degree of protection
IP20 conforming to IEC 60529 (terminals)
IP30 conforming to IEC 60529 (sheath)
product certificates
GL
UL
GOST
C-Tick
CSA
electromagnetic compatibility
Emission standard for industrial environments conforming to EN/IEC 61000-6-4
Emission standard for residential/commercial/light-industrial environments conforming to EN/IEC 61000-6-3
Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
immunity to micro-breaks
50 ms
overvoltage category
III conforming to IEC 60664-1
standards
EN/CEI 60255-6
relative humidity
95 % at 55 °C conforming to IEC 60068-2-30
operating temperature
-20…50 °C
storage room temperature
-40…70 °C
mechanical shock resistance
15 gn for 11 ms conforming to IEC 60255-21-1
where of non-dissipative shock
4 kV conforming to IEC 60255-5
4 kV conforming to IEC 60664-1
4 kV conforming to IEC 61000-4-5
vibration resistance
0.35 mm (f= 5...57.6 Hz) conforming to IEC 60068-2-6
1 gn (f= 57.6...150 Hz) conforming to IEC 60255-21-1
dielectric test voltage
2 kV AC 50 Hz, 1 min conforming to IEC 60255-5
2 kV AC 50 Hz, 1 min conforming to IEC 60664-1
insulation resistance
> 500 MΩ at 500 V DC between power supply and relay output conforming to IEC 60255-5
> 500 MΩ at 500 V DC between measurement and relay output conforming to IEC 60664-1
> 1 MOhm at 500 V DC between power supply and measurement se conforming to IEC 60255-5
> 500 MΩ at 500 V DC between power supply and relay output conforming to IEC 60664-1
> 500 MΩ at 500 V DC between measurement and relay output conforming to IEC 60255-5
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1