RM17UBE15 - Harmony, modulaarne 1-faasiline pingejuhtimisrelee, 5 A, 1 CO, 65...260 V AC/DC - Schneider Electric - Harmony, modulaarne 1-faasiline pingejuhtimisrelee, 5 A, 1 CO, 65...260 V AC/DC - Schneider Electric - 0

Laos

RM17UBE15 – Schneider Electric

EAN: 3389119405140

60,68 € KM-ta

75,25 € KM-ga

Harmony, modulaarne 1-faasiline pingejuhtimisrelee, 5 A, 1 CO, 65...260 V AC/DC - Schneider Electric

BaltElec ladu

Laos

Saadame 24-48h pärast

Tarnija ladu

Laos

Olemas, oodata 5-7 päeva pärast

Korvis

75,25 €

SPETSIFIKATSIOONID

Default

Seeria Harmony RE/RM

Main

product range Harmony Control Relay

product specific application For DC and single-phase power supply

switching capacity in va 1250 VA

job category AC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC- 12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
DC-14 conforming to IEC 60947-5-1

type of product or equipment Voltage control relay

rated output current 5 A

relay name RM17UBE

[ui] rated insulation voltage 250 V conforming to IEC 60664-1
400 V conforming to IEC 60664-1

parameters monitored by the relay Self-powered
Overvoltage and undervoltage detection

measuring range 65...260 V tension CA/CC

type of relay Voltage control relay

Complementary

[un] rated nominal voltage 110 to 240 V AC/DC 50/60 Hz +/- 10%

compatibility code RM17

contact description 1 F/O

maximum switching current 5 A CA/CC

output contacts 1 F/O

tightening torque 0.6...1 Nm conforming to IEC 60947-1

case material Self-extinguishing plastic

minimum switching current 10 mA at 5 V DC

product weight 0,08 kg

power consumed in va 0…3 VA AC

reset time 1500 ms delay

hysteresis 3% fixed threshold setting

connection mode Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...2 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with mouthpiece

safety reliability data B10d = 470000
MTTFd = 502.2 years

maximum measuring cycle 150 ms measurement cycle as real rms value

mechanical endurance 30000000 cycle

width (w) 17,5 mm

control circuit frequency 50...60 Hz +/- 10 %

immunity to micro cuts 20 ms

power-on delay 1000 ms CC
500 ms CA

supply voltage limits 50…270 V CA/CC

delay Adjustable 0.1…10 s, 0 + 10% when threshold exceeded

Local signalling for power ON LED (green)
for relay on LED (yellow)

measurement error < 1% over the entire range with voltage variation
0.2%/°C with temperature variation

measurement accuracy +/-10% of full scale value

functionality Overvoltage and undervoltage detection

mounting bracket 35 mm symmetrical DIN rail conforming to EN/IEC 60715

electrical stamina 100000 cycle

repeat accuracy +/- 0.5% for measurement and input circuit
+/- 1% for time delay

mounting position All positions without derating

maximum power consumption in w 1 W CC

polarity Non-reversible polarity on DC supply

command speed <= 360 operations/hour full load

maximum cut-off voltage 250 V CA/CC

Environment

degree of pollution 3 conforming to IEC 60664-1

ip degree of protection IP20 conforming to IEC 60529 (terminals)
IP30 conforming to IEC 60529 (sheath)

product certificates UL
GL
GOST
C-Tick
CSA

electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC 61000-6-4
Emission standard for residential/commercial/light-industrial environments conforming to EN/IEC 61000-6-3
Immunity for industrial environments conforming to NF EN/IEC 61000-6-2

overvoltage category III conforming to IEC 60664-1

standards EN/CEI 60255-6

quality labels THIS

relative humidity 95 % at 55 °C conforming to IEC 60068-2-30

operating temperature -20…50 °C

storage room temperature -40…70 °C

mechanical shock resistance 5 gn conforming to IEC 60068-2-27

where of non-dissipative shock 4 kV conforming to IEC 60255-5
4 kV conforming to IEC 60664-1
4 kV conforming to IEC 61000-4-5

European regulation 73/23/CEE - low voltage directive
89/336/CEE - electromagnetic compatibility

vibration resistance 0.35 mm (f= 5...57.6 Hz) conforming to IEC 60068-2-6
1 gn (f= 57.6...150 Hz) conforming to IEC 60255-21-1

dielectric test voltage 2 kV AC 50 Hz, 1 min conforming to IEC 60255-5
2 kV AC 50 Hz, 1 min conforming to IEC 60664-1

insulation resistance > 500 MΩ at 500 V DC conforming to IEC 60255-5
> 500 MΩ at 500 V DC conforming to IEC 60664-1

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

RM17UBE15 Schneider Electric on toode kategooriast Juhtreleed, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele RM17UBE15 - Schneider Electric

Kas BaltElec pakub RM17UBE15 jaoks hulgihinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: RM17UBE15, Schneider Electric, 10tk), et koostaksime projekti pakkumise.
Milline on RM17UBE15 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja partii saadavusest; kinnitame pakkumisega.
Kas RM17UBE15 firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas RM17UBE15 sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

RM17UBE15 - Schneider Electric

Harmony, modulaarne 1-faasiline pingejuhtimisrelee, 5 A, 1 CO, 65...260 V AC/DC

60,68 € KM-ta

75,25 € KM-ga

Laos Tarnija laos

Korvis