Tellimisel
Tellimisel
Tellimisel
Tellimisel
Tellimisel
Tellimisel
Tellimisel
RE22R2MYMR – Schneider Electric
EAN: 3606480792533
56,49 € KM-ta
70,04 € KM-ga
Harmony Time RE22 - ajarelee - 2OF - multi - 1s kuni 300h - 24V kuni 240VACDC - Schneider Electric
SPETSIFIKATSIOONID
Main
product range
Harmony Time Delay Relay
switching capacity in va
2000 VA
name of the device
RE22
type of product or equipment
Multi-function relays
rated output current
8 A
timer type
Switch-on power
Inhibition
time Asymmetrical flashing
Interval
Star-delta
Inhibition
time Asymmetrical flashing
Interval
Star-delta
Complementary
[un] rated nominal voltage
24…240 V CA/CC 50/60 Hz
maximum switching current
8 A
tightening torque
0.6...1 Nm conforming to IEC 60947-1
case material
Auto-extinguible
minimum switching current
10 mA at 5 V DC
product weight
0,105 kg
power consumed in va
3 VA at 240 V AC
electrical life
100000 cycles, 8 A at 250 V, AC-1
100000 cycles, 2 A at 24 V, DC-1
100000 cycles, 2 A at 24 V, DC-1
escape distance
4 kV/3 conforming to IEC 60664-1
led status
Green LED backlight (steady) for dial hand indication
Yellow LED (steady) for energized output relay
Yellow LED (fast flashing) for timing in progress and de-energized output relay
Yellow LED (slow flashing) for timing in progress and output relay energized
Yellow LED (steady) for energized output relay
Yellow LED (fast flashing) for timing in progress and de-energized output relay
Yellow LED (slow flashing) for timing in progress and output relay energized
connection mode
Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) rigid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) rigid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16 ) flexible with tip
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) rigid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16 ) flexible with tip
safety reliability data
B10d = 160000
MTTFd = 171.2 years
MTTFd = 171.2 years
mechanical endurance
10000000 cycle
width (w)
22,5 mm
function available
A- Power on-delay relay-2 "O/F"
At- Power on-delay relay w/ pause/summation (X1)-2 "O/F"
Aw- Power on-delay relay w/ retrigger/restart-2 "O/F"
C- Off-delay relay w/ control signal-2 "O/F"
Ct- Off-delay relay w/ control signal and pause/summation-2 "O/F"
D- Symmetrical flashing relay (starting pulse-off)-2 "O/F"
Dt- Symmetrical flashing relay (starting pulse-off) w/ pause/summation (X1)-2 "O/F"
Dw- Symmetrical flashing relay (starting pulse-off) w/ retrigger/restart-2 "O/F"
Di- Symmetrical flashing relay (starting pulse-on)-2 "O/F"
Dit- Symmetrical flashing relay (starting pulse-on) w/ pause/summation (X1)-2 "O/F"
Diw- Symmetrical flashing relay (starting pulse-on) w/ retrigger/restart-2 "O/F"
H- Interval relay-2 "O/F"
Ht- Interval relay w/ pause/summation (X1)-2 "O/F"
Hw- Interval relay w/ retrigger/restart-2 "O/F"
Qg- Star-delta relay (2 CO outputs w/ same common)-2 "O/F"
Qgt- Star-delta relay (2 CO outputs w/ same common) w/ pause/summation-2 "O/F"
Qt- Star-delta relay (2 CO outputs w/ split common)-2 "O/F"
Qtt- Star-delta relay (2 CO outputs w/ split common) w/ pause/summation (X1)-2 "O/F"
W- Interval relay w/ control signal off-2 "O/F"
Wt- Interval relay w/ control signal off and pause/summation-2 "O/F"
At- Power on-delay relay w/ pause/summation (X1)-2 "O/F"
Aw- Power on-delay relay w/ retrigger/restart-2 "O/F"
C- Off-delay relay w/ control signal-2 "O/F"
Ct- Off-delay relay w/ control signal and pause/summation-2 "O/F"
D- Symmetrical flashing relay (starting pulse-off)-2 "O/F"
Dt- Symmetrical flashing relay (starting pulse-off) w/ pause/summation (X1)-2 "O/F"
Dw- Symmetrical flashing relay (starting pulse-off) w/ retrigger/restart-2 "O/F"
Di- Symmetrical flashing relay (starting pulse-on)-2 "O/F"
Dit- Symmetrical flashing relay (starting pulse-on) w/ pause/summation (X1)-2 "O/F"
Diw- Symmetrical flashing relay (starting pulse-on) w/ retrigger/restart-2 "O/F"
H- Interval relay-2 "O/F"
Ht- Interval relay w/ pause/summation (X1)-2 "O/F"
Hw- Interval relay w/ retrigger/restart-2 "O/F"
Qg- Star-delta relay (2 CO outputs w/ same common)-2 "O/F"
Qgt- Star-delta relay (2 CO outputs w/ same common) w/ pause/summation-2 "O/F"
Qt- Star-delta relay (2 CO outputs w/ split common)-2 "O/F"
Qtt- Star-delta relay (2 CO outputs w/ split common) w/ pause/summation (X1)-2 "O/F"
W- Interval relay w/ control signal off-2 "O/F"
Wt- Interval relay w/ control signal off and pause/summation-2 "O/F"
power frequency
50...60 Hz +/- 5 %
power-on delay
100 ms
temperature drift
+/- 0,05 %/°C
voltage drift
+/- 0.2%/V
timing range
3...30 min
30...300 min
0,3…3 s
3...30 H
10...100 s
1…10 s
0,05...1 s
30...300 s
30...300 H
3...30 s
30...300 min
0,3…3 s
3...30 H
10...100 s
1…10 s
0,05...1 s
30...300 s
30...300 H
3...30 s
power consumed in w
1,5 W à 240 V CC
mounting bracket
35 mm DIN rail conforming to EN/IEC 60715
repeat accuracy
+/- 0.5% conforming to IEC 61812-1
control signal pulse width
100 ms with parallel load
30 ms
30 ms
input voltage release
<=2.4V
mounting position
All positions
order type
Rotary
knob Diagnostic button
External potentiometer
knob Diagnostic button
External potentiometer
type and composition of contacts
1 C/O timed or instantaneous contact, cadmium-free
2 C/O timed contact, cadmium-free
2 C/O timed contact, cadmium-free
voltage range of use
0.85 to 1.1 Us
dielectric strength
2.5 kV for 1 mA/1 minute at 50 Hz between relay output and power supply with basic insulation conforming to IEC 61812-1
recovery time
120 ms on de-energization
rated impulse withstand voltage
5 kV for 1.2...50 µs conforming to IEC 60664-1
exact adjustment of the delay time
+/- 10 % full scale at 25 °C conforming to IEC 61812-1
maximum cut-off voltage
250 VCA
logic output type
Relay
Environment
degree of pollution
3 conforming to IEC 60664-1
ip degree of protection
IP40 casing: conforming to IEC 60529
IP20 terminals: conforming to IEC 60529
IP50 front panel: conforming to IEC 60529
IP20 terminals: conforming to IEC 60529
IP50 front panel: conforming to IEC 60529
product certificates
RCM
CE
EAC
CSA
CCC
UL
GL
CE
EAC
CSA
CCC
UL
GL
electromagnetic compatibility
Fast transient immunity test - test level: 1 kV (capacitive connection clip) level 3 conforming to IEC 61000-4-4
Surge immunity test - test level: 1 kV (differential mode) level 3 conforming to IEC 61000-4-5
Surge immunity test - test level: 2 kV (common mode) level 3 conforming to IEC 61000-4-5
Electrostatic discharge - test level: 6 kV (contact discharge )level 3 conforming to IEC 6100-4-11
Electrostatic discharge - test level: 8 kV (air discharge)level 3 conforming to IEC 6100-4-11 Radiated
radio-frequency electromagnetic field immunity test - test level: 10 V/m (80 MHz...1 GHz) level 3 conforming to IEC 61000-4-3
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) level 3 conforming to IEC 61000-4-6
Fast transient burst - test level: 2 kV (direct contact) level 3 conforming to IEC 61000-4-4
Immunity to micro-breaks and voltage dips - test level: 30 % (500 ms) conforming to IEC 61000-4-11
Immunity to micro-breaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11
Surge immunity test - test level: 1 kV (differential mode) level 3 conforming to IEC 61000-4-5
Surge immunity test - test level: 2 kV (common mode) level 3 conforming to IEC 61000-4-5
Electrostatic discharge - test level: 6 kV (contact discharge )level 3 conforming to IEC 6100-4-11
Electrostatic discharge - test level: 8 kV (air discharge)level 3 conforming to IEC 6100-4-11 Radiated
radio-frequency electromagnetic field immunity test - test level: 10 V/m (80 MHz...1 GHz) level 3 conforming to IEC 61000-4-3
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) level 3 conforming to IEC 61000-4-6
Fast transient burst - test level: 2 kV (direct contact) level 3 conforming to IEC 61000-4-4
Immunity to micro-breaks and voltage dips - test level: 30 % (500 ms) conforming to IEC 61000-4-11
Immunity to micro-breaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11
immunity to micro-breaks
10 ms
operating ambient temperature
-20…60 °C
overvoltage category
III conforming to IEC 60664-1
standards
UL 508
CEI 61812-1
CEI 61812-1
relative humidity
95 % at 25…55 °C
storage room temperature
-40…70 °C
mechanical shock resistance
15 gn not operating for 11 ms conforming to IEC 60068-2-27
5 gn operating for 11 ms conforming to IEC 60068-2-27
5 gn operating for 11 ms conforming to IEC 60068-2-27
European regulation
2004/108/CE - electromagnetic compatibility
2006/95/CE - low voltage directive
2006/95/CE - low voltage directive
vibration resistance
20 m/s² (f= 10...150 Hz) conforming to IEC 60068-2-6
insulation resistance
100 MΩ at 500 V DC conforming to IEC 60664-1
KKK ja hinna lisateave
RE22R2MYMR on lahendus kategooriast Harmony RE/RM, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.
- Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
- Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
- Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.
Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele RE22R2MYMR - Schneider Electric
-
Kas BaltElec pakub RE22R2MYMR jaoks mahupõhist hinda?
Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: RE22R2MYMR, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
-
Milline on RE22R2MYMR saadavus ja tarneaeg Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja partii saadavusest; kinnitame pakkumisega.
-
Kas RE22R2MYMR firmalt Schneider Electric on originaaltoode?
Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
-
Kas RE22R2MYMR sobib minu rakendusse?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub tarne ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
RE22R2MYMR - Schneider Electric
Harmony Time RE22 - ajarelee - 2OF - multi - 1s kuni 300h - 24V kuni 240VACDC
56,49 € KM-ta
70,04 € KM-ga
Tellimisel
Teie avaldus on edukalt saadetud