LC3D18AP7 - TeSys LC3D - star-delta starter plaadil - 230Vac mähis - Schneider Electric - TeSys LC3D - star-delta starter plaadil - 230Vac mähis - Schneider Electric - 0

Tellimisel

LC3D18AP7 – Schneider Electric

EAN: 3389110546125

245,62 € KM-ta

304,57 € KM-ga

TeSys LC3D - star-delta starter plaadil - 230Vac mähis - Schneider Electric

Korvis

304,57 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS Deca kontaktorid

Main

Range TeSys
TeSys Deca

[uc] control circuit voltage 230 V AC 50/60Hz

job category AC-3

name of the device LC3D

switch application Motor control (AC-3)

type of product or equipment Starter star triangle

Product Name TeSys D
TeSys Deca

[ui] rated insulation voltage Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA Certified
Signaling Circuit: 600V UL Certified

control circuit type AC at 50/60 Hz

composition of the power pole contacts 3 3F

motor power kW 11 kW at 220/230 V AC 50/60 Hz
22 kW at 415 V AC 50/60 Hz
22 kW at 440 V AC 50/60 Hz
18.5 kW at 380/400 V AC 50/60 Hz

protective case Protective cover

Complementary

[ie] rated operational current 18 A (at <60 °C) at <= 440 V AC AC-3 for power circuit

[ue] rated operational voltage Power circuit: <= 690 V AC 25...400 Hz

Handle front plate colour 124 mm

tightening torque Power circuit: 1.7 Nm - on screw-clamp terminals - with Ø 6 mm flat screwdriver
Power circuit: 1.7 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Remote control: 1.7 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.7 Nm - on screw-clamp terminals - with Phillips n° 2 screwdriver
Power circuit: 1.7 Nm - on screw terminals- clamp - with pozidriv n°2 screwdriver
Remote control: 1.7 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver

[uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947

auxiliary contacts available on each contactor 1 NO for star contactor KM1

average fuel consumption when going 7.5 VA 60 Hz cos phi 0.3 (at 20°C)
7 VA 50 Hz cos phi 0.3 (at 20°C)

minimum switching current 5 mA for signaling circuit

product weight 1,73 kg

type of auxiliary contacts Mechanically linked conforming to IEC 60947-5-1 3 1 NC + 1
NC Mirror contact conforming to IEC 60947-4-1 3 1 NC

electrical life 1.65 Mcycles 18 A AC-3 at Ue <= 440 V

connection mode Remote control: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 1 1… 4 mm² - cable stiffness: flexible with cable end
Remote control: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw clamp terminals 1 1...4 mm² - cable stiffness: solid without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 1 1.5…6 mm² - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 1.5...6 mm² - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 1 1…6 mm² - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp
terminals screw clamp 1 1.5…6 mm² - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 2 1.5…6 mm² - cable stiffness: solid without cable end

type of lock Mechanical

control circuit voltage range Level loss: 0.3 to 0.6 Uc at 50/60 Hz (at <60°C)
Operational: 0.8 to 1.1 Uc at 50 Hz (at <60°C)
Operational: 0.85… 1.1 Uc at 60 Hz (at <60 °C)

width (w) 144 mm

mechanical robustness Contactor open vibrations: 2 Gn, 5 to 300 Hz
Contactor closed vibrations: 4 Gn, 5 to 300 Hz
Contactor open shocks: 10 Gn for 11 ms
Contactor closed shocks: 15 Gn for 11 ms

Flame retardance V1 conforming to UL 94

product presentation Pre-wired

depth 143 mm

mounting bracket Platinum

signaling circuit frequency 25 to 400 Hz

calling power goes 70 VA 60 Hz cos phi 0.75 (at 20°C)
70 VA 50 Hz cos phi 0.75 (at 20°C)

boot time 30 s

max command speed 30 cycles/h at <60°C

minimum switching voltage 17 V for signaling circuit

non-overlap time 1.5 ms on de-
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact

coil technology Without integrated interference suppression module

Poles description 3 3P

Environment

degree of pollution 3

ip degree of protection IP20 front face conforming to IEC 60529

operating altitude 3000 m without derating

product certificates UL
CSA
BV
GL
RINA
CCC
LROS (Lloyds register of shipping)
GOST
DNV

overvoltage category III

standards UL 508
CEI 60947-4-1
EN 60947-5-1
CEI 60947-5-1
CSA C22.2 No 14
EN 60947-4-1
CEI 60335-1

fire resistance 850 °C conforming to IEC 60695-2-1

thermal dissipation 2…3 W at 50/60 Hz

operating temperature -40…70 °C at Uc

storage room temperature -60…80 °C

climatic resistance conforming to IACS E10
conforming to IEC 60947-1 Annex Q category D

protective treatment TH conforming to IEC 60068-2-30

insulation resistance > 10 MΩ for signaling circuit

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC3D18AP7 Schneider Electric on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud ettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC3D18AP7 - Schneider Electric

Kas teie pakute LC3D18AP7 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: LC3D18AP7, Schneider Electric, 10tk), et koostaksime projekti pakkumise.
Milline on LC3D18AP7 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
Kas LC3D18AP7 firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC3D18AP7 sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC3D18AP7 - Schneider Electric

TeSys LC3D - star-delta starter plaadil - 230Vac mähis

245,62 € KM-ta

304,57 € KM-ga

Tellimisel

Korvis