Tellimisel
LC2D150P7 – Schneider Electric
EAN: 3389110509656
752,97 € KM-ta
933,69 € KM-ga
TeSys LC2D - pöördkontaktor - 3P - AC-3 440V - 150A - 230Vac mähis. - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
TeSyS Deca kontaktorid
Main
Range
TeSys
[uc] control circuit voltage
230 V AC 50/60Hz
job category
AC-1
AND-3
AND-3
name of the device
LC2D
switch application
Motor control (AC-3)
Resistive load (AC-1)
Resistive load (AC-1)
type of product or equipment
Reversing contactor
Product Name
TeSys D
TeSys Deca
TeSys Deca
[ui] rated insulation voltage
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA certified
Signaling circuit: 600 V UL certified
Power circuit: 1000 V conforming to IEC 60947-4-1
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA certified
Signaling circuit: 600 V UL certified
Power circuit: 1000 V conforming to IEC 60947-4-1
control circuit type
AC at 50/60 Hz
engine power hp
40 hp at 200/208 V AC 60 Hz for 3 motor phases
50 hp at 230/240 V AC 60 Hz for 3 motor phases
100 hp at 460/480 V AC 60 Hz for 3 motor phases
125 hp at 575/600 V AC 60 Hz for 3 motor phases
50 hp at 230/240 V AC 60 Hz for 3 motor phases
100 hp at 460/480 V AC 60 Hz for 3 motor phases
125 hp at 575/600 V AC 60 Hz for 3 motor phases
composition of the power pole contacts
3F
motor power kW
40 kW at 220...230 V AC 50 Hz
75 kW at 380...400 V AC 50 Hz
80 kW at 415...440 V AC 50 Hz
90 kW at 500 V CA 50 Hz
100 kW at 660.. .690 V AC 50 Hz
75 kW at 1000 V AC 50 Hz
75 kW at 380...400 V AC 50 Hz
80 kW at 415...440 V AC 50 Hz
90 kW at 500 V CA 50 Hz
100 kW at 660.. .690 V AC 50 Hz
75 kW at 1000 V AC 50 Hz
average impedance
0.6 mOhm - Ith 200 A 50 Hz for power circuit
Complementary
[ie] rated operational current
200 A (at <60°C) at <= 440 V AC AC-1 for power circuit
150 A (at <60°C) at <= 440 V AC AC-3 for power circuit
150 A (at <60°C) at <= 440 V AC AC-3 for power circuit
[ue] rated operational voltage
Power circuit: <= 1000 V AC 25...400 Hz
Power circuit: <= 300 V DC
Power circuit: <= 300 V DC
[ics] rated service breaking capacity
1400 A at 440 V for power circuit conforming to IEC 60947
[icw] rated short-time withstand current
250 A at <40°C - 10 min for
580 A power circuit at <40°C - 1 min for
1200 A power circuit at <40°C - 10 s for
1400 A power circuit at <40°C - 1s for
100 A power circuit - 1s for
120 A signaling circuit - 500 ms for
140 A signaling circuit - 100 ms for signaling circuit
580 A power circuit at <40°C - 1 min for
1200 A power circuit at <40°C - 10 s for
1400 A power circuit at <40°C - 1s for
100 A power circuit - 1s for
120 A signaling circuit - 500 ms for
140 A signaling circuit - 100 ms for signaling circuit
[ith] conventional thermal current
200 A at <60 °C) for power circuit
caliber of the fuse to be associated
10 A gG for signaling circuit conforming to IEC 60947-5-1
315 A gG at <= 690 V type 1 coordination for power circuit
250 A gG at <= 690 V type 2 coordination for power circuit
315 A gG at <= 690 V type 1 coordination for power circuit
250 A gG at <= 690 V type 2 coordination for power circuit
Handle front plate colour
158 mm
tightening torque
Remote control: 1.2 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector hexagonal screw head 4 mm
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector hexagonal screw head 4 mm
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver
[uimp] rated impulse withstand voltage
8 kV conforming to IEC 60947
auxiliary contacts
1 "O" + 1 "F"
average fuel consumption when going
2…18 VA (at 20°C) cos phi 0.9 60 Hz
2…18 VA (at 20°C) cos phi 0.9 50 Hz
2…18 VA (at 20°C) cos phi 0.9 50 Hz
mechanical life
8000000 cycle
minimum switching current
5 mA for signaling circuit
product weight
6,4 kg
type of auxiliary contacts
mechanically linked type 1 NC + 1 NO conforming to IEC 60947-5-1
1 NC mirror contact type conforming to IEC 60947-4-1
1 NC mirror contact type conforming to IEC 60947-4-1
electrical life
0.85 Mcycles 150 A AC-3 at Ue <= 440 V
1 Mcycles 200 A AC-1 at Ue <= 440 V
1 Mcycles 200 A AC-1 at Ue <= 440 V
connection mode
Remote control: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²flexible without cable end
Remote control: screw terminals- clamp 2 cable(s) 1...2.5 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²rigid without cable end
Remote control: screw clamp terminals 2 cable(s) 1...2.5 mm²rigid without cable end
Power circuit: connector 1 cable(s) 10...120 mm²flexible without cable end
Power circuit : connector 2 flexible 10...50 mm² cable(s) without cable end
Power circuit: connector 1 cable(s) 10...120 mm²flexible with cable end
Power circuit: connector 2 cable(s) 10...50 mm²flexible with cable end
Power circuit: connector 1 cable(s) 10...120 mm²rigid without cable end
Power circuit : connector 2 cable(s) 10...50 mm² rigid without cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²flexible without cable end
Remote control: screw terminals- clamp 2 cable(s) 1...2.5 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1...2.5 mm²rigid without cable end
Remote control: screw clamp terminals 2 cable(s) 1...2.5 mm²rigid without cable end
Power circuit: connector 1 cable(s) 10...120 mm²flexible without cable end
Power circuit : connector 2 flexible 10...50 mm² cable(s) without cable end
Power circuit: connector 1 cable(s) 10...120 mm²flexible with cable end
Power circuit: connector 2 cable(s) 10...50 mm²flexible with cable end
Power circuit: connector 1 cable(s) 10...120 mm²rigid without cable end
Power circuit : connector 2 cable(s) 10...50 mm² rigid without cable end
type of lock
Electrical
Mechanical
Mechanical
control circuit voltage range
0.3...0.5 Uc -40...70 °C dropout AC 50/60 Hz
0.8...1.15 Uc -40...55 °C operational AC 50/60 Hz
1...1.15 Uc 55…70 °C operational AC 50/60 Hz
0.8...1.15 Uc -40...55 °C operational AC 50/60 Hz
1...1.15 Uc 55…70 °C operational AC 50/60 Hz
width (w)
266 mm
mechanical robustness
Contactor open vibrations: 2 Gn, 5 to 300 Hz
Contactor closed vibrations: 4 Gn, 5 to 300 Hz
Contactor closed shocks: 15 Gn for 11 ms
Contactor open shocks: 6 Gn for 11 ms
Contactor closed vibrations: 4 Gn, 5 to 300 Hz
Contactor closed shocks: 15 Gn for 11 ms
Contactor open shocks: 6 Gn for 11 ms
Flame retardance
V1 conforming to UL 94
product presentation
Pre-assembled with reversing busbars
rated rms inrush power
140 A AC for signaling circuit conforming to IEC 60947-5-1
250 A DC for signaling circuit conforming to IEC 60947-5-1
1660 A at 440 V for power circuit conforming to IEC 60947
250 A DC for signaling circuit conforming to IEC 60947-5-1
1660 A at 440 V for power circuit conforming to IEC 60947
depth
148 mm
mounting bracket
Rail
Platine
Platine
frequency
With
signaling circuit frequency
25 to 400 Hz
calling power goes
280…350 VA 60 Hz cos phi 0.9 (at 20 °C)
280…350 VA 50 Hz cos phi 0.9 (at 20 °C)
280…350 VA 50 Hz cos phi 0.9 (at 20 °C)
operating time
20…35 ms closing
40…75 ms opening
40…75 ms opening
power loss per pole
24 W AC-1
13,5 W AC-3
13,5 W AC-3
security reliability level
B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
max command speed
1200 cycles/h at <60°C
minimum switching voltage
17 V for signaling circuit
non-overlap time
1.5 ms on de-
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
coil technology
Built-in bi-directional peak limit diode suppressor
Poles description
3P
Environment
degree of pollution
3
ip degree of protection
IP20 front face conforming to IEC 60529
operating altitude
0...3000 m
product certificates
BV
CCC
CSA
DNV
GL
RINA
UL
EAC
UKCA
CCC
CSA
DNV
GL
RINA
UL
EAC
UKCA
overvoltage category
III
standards
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 508
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 508
fire resistance
850 °C conforming to IEC 60695-2-1
thermal dissipation
3…4.5 W at 50/60 Hz
operating temperature
-40…60 °C
60…70 °C with current reduction
60…70 °C with current reduction
storage room temperature
-60…80 °C
climatic resistance
conform to IACS E10
protective treatment
TH conforming to IEC 60068-2-30
insulation resistance
> 10 MΩ for signaling circuit
KKK ja hinna lisateave
LC2D150P7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.
- Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
- Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
- Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.
Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele LC2D150P7 - Schneider Electric
-
Kas teie pakute LC2D150P7 jaoks hulgihinda?
Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC2D150P7, 5tk), et koostaksime personaalse pakkumise.
-
Milline on LC2D150P7 saadavus ja tarne Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
-
Kas LC2D150P7 firmalt Schneider Electric on originaaltoode?
Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
-
Kas LC2D150P7 sobib minu rakendusse?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub tarne ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
LC2D150P7 - Schneider Electric
TeSys LC2D - pöördkontaktor - 3P - AC-3 440V - 150A - 230Vac mähis.
752,97 € KM-ta
933,69 € KM-ga
Tellimisel
Teie avaldus on edukalt saadetud