LC1K09004P7 - TeSys LC1K - kontaktor - 4P - AC-1 440V - 20A - 230Vac mähis - Schneider Electric - TeSys LC1K - kontaktor - 4P - AC-1 440V - 20A - 230Vac mähis - Schneider Electric - 0

Tellimisel

LC1K09004P7 – Schneider Electric

EAN: 3389110488470

19,55 € KM-ta

24,24 € KM-ga

TeSys LC1K - kontaktor - 4P - AC-1 440V - 20A - 230Vac mähis - Schneider Electric

Korvis

24,24 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS K

Main

Range TeSys

[uc] control circuit voltage 230 V AC 50/60Hz

job category AC-1

name of the device LC1K

switch application Resistive load (AC-1)

type of product or equipment contactor

Product Name TeSys K

[ui] rated insulation voltage Power circuit: 600 V conforming to UL 508
Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit: 600 V conforming to CSA C22.2 No 14

control circuit type AC at 50/60 Hz

composition of the power pole contacts 4F

average impedance 3 mOhm - Ith 20 A 50 Hz for power circuit

Complementary

[ie] rated operational current 20 A (at <50 °C) at <= 440 V AC AC-1 for power circuit
16 A (at <70 °C) at 690 V AC AC-1 for power circuit

[ue] rated operational voltage Power circuit: 690 V AC 50/60 Hz

application Control

[ics] rated service breaking capacity 110 A at 415 V conforming to IEC 60947
110 A at 440 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947
110 A at 220...230 V conforming to IEC 60947
110 A at 380... .400 V conforming to IEC 60947
70 A at 660...690 V conforming to IEC 60947

[icw] rated short-time withstand current 90 A at <50°C - 1s for power circuit
85 A at <50°C - 5 s for power circuit
80 A at <50°C - 10 s for power circuit
60 A at <50°C - 30 s for
45 A power circuit at <50 °C - 1 min for
40 A power circuit at <50 °C - 3 min for
20 A power circuit at <50 °C - >= 15 min for power circuit

[ith] conventional thermal current 20 A at <50 °C) for power circuit

caliber of the fuse to be associated 25 A gG at <= 440 V for power circuit
25 A aM for power circuit

Handle front plate colour 58 mm

tightening torque 0.8…1.3 Nm - on Philips no. 2 cross-head screw clamp terminals
0.8…1.3 Nm - on flat screw clamp terminals Ø 6 mm
0.8…1.3 Nm - on terminal blocks screw clamp pozidriv n°2

[uimp] rated impulse withstand voltage 8 kV

average fuel consumption when going 4.5VA (at 20°C)

product weight 0,18 kg

electrical life 0.18 Mcycles 20 A AC-1 at Ue <= 440 V

connection mode Screw clamp terminals 1 cable(s) 1.5...4 mm²rigid
Screw clamp terminals 1 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals
1 cable(s) 0.34... 2.5 mm²flexible with cable end Screw clamp terminals
2 cable(s) 1.5...4 mm²rigid
Screw clamp terminals 2 cable(s) 0.75...4 mm²flexible without cable end Screw clamp terminals
2 cable(s) 0.34...1.5 mm² flexible with cable end

control circuit voltage range Operational: 0.8…1.15 Uc (at <50°C)
Level loss: 0.2…0.75 Uc (at <50°C)

mechanical endurance 10 Mcycles

width (w) 45 mm

mechanical robustness Contactor closed shocks, on the X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Contactor closed shocks, on the Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Contactor closed shocks, on the Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Contactor open shocks, on the X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27
Contactor open shocks, on the Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Contactor open shocks, on the Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Contactor closed vibrations: 4 Gn, 5 to 300 Hz conforming to IEC 60068-2-6
Contactor open vibrations: 2 Gn, 5 to 300 Hz conforming to IEC 60068-2-6

Flame retardance V1 conforming to UL 94
Requirement 2 conforming to NF F 16-101
Requirement 2 conforming to NF F 16-102

rated rms inrush power 110 A AC for power circuit conforming to NF C 63-110
110 A AC for power circuit conforming to IEC 60947

depth 57 mm

mounting bracket Platine
Rail

signaling circuit frequency <= 400 Hz

calling power goes 30VA (at 20°C)

operating time 10…20 ms désexcitation bobine + ouverture "F"
10…20 ms excitation bobine + fermeture "F"

security reliability level B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1

max command speed 3600 cyc/h

Poles description 4P

Environment

ip degree of protection IP2x conforming to VDE 0106

operating altitude 2000 m without derating

product certificates CSA
UL
UKCA

overvoltage category III

standards BS 5424
CEI 60947
NF C 63-110
VDE 0660

thermal dissipation 1.3W

storage room temperature -50…80 °C

protective treatment TC conforming to IEC 60068
TC conforming to DIN 50016

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1K09004P7 Schneider Electric on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1K09004P7 - Schneider Electric

Kas teie pakute LC1K09004P7 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1K09004P7, 5tk), et koostaksime personaalse pakkumise.
Milline on LC1K09004P7 saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1K09004P7 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1K09004P7 sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.

Hiljuti vaadatud

LC1K09004P7 - Schneider Electric

TeSys LC1K - kontaktor - 4P - AC-1 440V - 20A - 230Vac mähis

19,55 € KM-ta

24,24 € KM-ga

Tellimisel

Korvis