LC1F400P7 - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 230 V AC - Schneider Electric - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 230 V AC - Schneider Electric - 0

Tellimisel

LC1F400P7 – Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 230 V AC - Schneider Electric

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Contactor application Motor control
Resistive load

Device short name LC1F

Range TeSys

[uc] control circuit voltage 230 V AC 40...400 Hz

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 40...400 Hz

motor power kW 75 kW at 400 V AC 50/60 Hz (AC-4)
200 kW at 380...400 V AC 50/60 Hz (AC-3)
220 kW at 415 V AC 50/60 Hz (AC-3)
250 kW at 440 V AC 50/60 Hz (AC-3)
257 kW at 500 V AC 50/60 Hz (AC-3)
280 kW at 660...690 V AC 50/60 Hz (AC-3)
185 kW at 1000 V AC 50/60 Hz (AC-3)
110 kW at 220...230 V AC 50/60 Hz (AC-3)

average impedance 0.26 mOhm - Ith 500 A 50 Hz

Complementary

[ie] rated operational current 500 A (at <40 °C) at <= 440 V AC AC-1
400 A (at <55 °C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC

compatibility code LC1F

[ics] rated service breaking capacity 3200 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 3600 A 40 °C - 10 s
2400 A 40 °C - 30 s
1700 A 40 °C - 1 min
1200 A 40 °C - 3 min
1000 A 40 °C - 10 min

[ith] conventional thermal current 500 A (at 40 °C)

Product certifications ABS
CSA
UL
BV
DNV
RMRoS
LROS (Lloyds register of shipping)
CB
RINA
UKCA

Handle front plate colour 206 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 35 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mm
Power circuit: lugs-ring terminals 2 cable(s) 150 mm²
Power circuit: bolted connection

Associated fuse rating 400 A aM at <= 440 V
500 A gG at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)
Drop-out: 0.3...0.5 Uc 40...400 Hz (at 55 °C)

width (w) 213 mm

Heat dissipation 14 W

Net weight 9.1 kg

Hold-in power consumption in va 15 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

Mounting support Plate

power dissipation per pole 65 W AC-1
42 W AC-3

depth 219 mm

Inrush power in va 1075 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 40...65 ms closing
100...170 ms opening

contactor coil voltage 230 V AC standard

Motor power range 110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-1
AC-3
AC-4

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards EN 60947-1
EN 60947-4-1
IEC 60947-1
IEC 60947-4-1
JIS C8201-4-1

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1F400P7 Schneider Electric on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud ettevõtetele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F400P7 - Schneider Electric

Kas BaltElec pakub LC1F400P7 jaoks mahupõhist hinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1F400P7, 5tk), et koostaksime personaalse pakkumise.
Milline on LC1F400P7 saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
Kas LC1F400P7 firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F400P7 sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F400P7 - Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 230 V AC

Tellimisel