LC1F400FD - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 110 V DC - Schneider Electric - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 110 V DC - Schneider Electric - 0

Ainult taotlusel

LC1F400FD – Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 110 V DC - Schneider Electric

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Contactor application Motor control
Resistive load

Device short name LC1F

Range TeSys

[uc] control circuit voltage 110 V DC

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type DC standard

motor power kW 75 kW at 400 V AC 50/60 Hz (AC-4)
200 kW at 380...400 V AC 50/60 Hz (AC-3)
220 kW at 415 V AC 50/60 Hz (AC-3)
250 kW at 440 V AC 50/60 Hz (AC-3)
257 kW at 500 V AC 50/60 Hz (AC-3)
280 kW at 660...690 V AC 50/60 Hz (AC-3)
185 kW at 1000 V AC 50/60 Hz (AC-3)
110 kW at 220...230 V AC 50/60 Hz (AC-3)

average impedance 0.26 mOhm - Ith 500 A 50 Hz

Complementary

[ie] rated operational current 500 A (at <40 °C) at <= 440 V AC AC-1
400 A (at <55 °C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC

compatibility code LC1F

[ics] rated service breaking capacity 3200 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 3600 A 40 °C - 10 s
2400 A 40 °C - 30 s
1700 A 40 °C - 1 min
1200 A 40 °C - 3 min
1000 A 40 °C - 10 min

[ith] conventional thermal current 500 A (at 40 °C)

Product certifications UL
CSA
CB
ABS
BV
DNV
LROS (Lloyds register of shipping)
RMRoS
RINA
UKCA

Handle front plate colour 206 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 35 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mm
Power circuit: lugs-ring terminals 2 cable(s) 150 mm²
Power circuit: bolted connection

Associated fuse rating 400 A aM at <= 440 V
500 A gG at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc (at 55 °C)
Drop-out: 0.2...0.35 Uc (at 55 °C)

width (w) 213 mm

Heat dissipation 6 W

Net weight 9.1 kg

Hold-in power consumption in w 6 W at 20 °C

Mounting support Plate

power dissipation per pole 65 W AC-1
42 W AC-3

depth 219 mm

inrush power in w 1000 W (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 50...60 ms closing
45...60 ms opening

contactor coil voltage 110 V DC standard

Motor power range 110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-3
AC-1
AC-4

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards IEC 60947-4-1
JIS C8201-4-1
EN 60947-4-1
EN 60947-1
IEC 60947-1

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1F400FD on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F400FD - Schneider Electric

Kas BaltElec pakub LC1F400FD jaoks hulgihinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1F400FD, Schneider Electric, 10tk), et koostaksime projekti pakkumise.
Milline on LC1F400FD saadavus ja tarne Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1F400FD firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F400FD sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F400FD - Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 400 A mähis 110 V DC

Ainult taotlusel