LC1F225Q7 - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - mähis 380Vac - Schneider Electric - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - mähis 380Vac - Schneider Electric - 0

Tellimisel

LC1F225Q7 – Schneider Electric

EAN: 3389110460117

749,19 € KM-ta

929,00 € KM-ga

TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - mähis 380Vac - Schneider Electric

Korvis

929,00 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

product range TeSys F

Range TeSys

[uc] control circuit voltage 380 V AC 40...400 Hz

job category AND-1
AND-3
AND-4

name of the device LC1F

switch application Motor control (AC-3)
Resistive load (AC-1)

type of product or equipment contactor

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C

control circuit type AC at 40...400 Hz

composition of the power pole contacts 3F

motor power kW 110 kW at 380...400 V AC 50/60 Hz (AC-3)
110 kW at 415 V AC 50/60 Hz (AC-3)
110 kW at 440 V CA 50/60 Hz (AC-3)
129 kW at 500 V AC 50/60 Hz (AC-3)
129 kW at 660...690 V AC 50/60 Hz (AC-3)
63 kW at 220...230 V CA 50/60 Hz (AC- 3)
40 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0,32 mOhm - Ith 315 A 50 Hz

Complementary

[ie] rated operational current 315 A (at <40°C) at <= 440 V AC-1
225 A (at <55°C) at <= 440 V AC-3

[ue] rated operational voltage <= 460 V CC
<= 690 V CA 50/60 Hz

compatibility code LC1F

[ics] rated service breaking capacity 1800 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1800 A at <40°C - 10 s
1000 A at <40°C - 30 s
850 A at <40°C - 1 min
560 A at <40°C - 3 min
440 A at <40°C - 10 min

[ith] conventional thermal current 315A at <40°C)

caliber of the fuse to be associated 315 A gG at <= 440 V
250 A aM at <= 440 V

Handle front plate colour 197 mm

tightening torque Remote control: 1.2 Nm
Power circuit: 35 Nm

[uimp] rated impulse withstand voltage 8 kV

average fuel consumption when going 9.9 VA, 40...400 Hz cos phi 0.9 (at 20°C)

mechanical life 10 Mcycles

product weight 4,75 kg

average consumption on call going 1070 VA, 40...400 Hz cos phi 0.9 (at 20°C)

connection mode Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without end cable
length Remote control: screw clamp terminals 2 cable(s) 1...4 mm² rigid without cable end
Power circuit: bar 2 cable(s) - busbar section: 32 x 4 mm
Power circuit: ring terminals 1 cable(s) 185 mm²
Power circuit: connector 1 cable(s) 185 mm²
Power circuit: connection by bolting

control circuit voltage range Operational: 0.85…1.1 Uc 40...400 Hz (at 55 °C)
Level loss: 0.2...0.55 Uc 40...400 Hz (at 55 °C)

width (w) 168,5 mm

depth 181 mm

mounting bracket Platinum

operating time 35 ms closing (at Uc)
130 ms opening (at Uc)

power loss per pole 32 W AC-1
16 W AC-3

max command speed 2400 cycles/h at <55°C

Poles description 3P

Environment

ip degree of protection IP20 front face with protectors conforming to IEC 60529
IP20 front face with protectors conforming to VDE 0106

operating altitude 3000 m without current reduction

product certificates BV
UL
ABS
LROS (Lloyds register of shipping)
CCC
CB
RINA
DNV
RMRoS
UKCA

ambient air temperature for operation -40…70 °C

operating ambient temperature -5…55 °C

overvoltage category III

standards CEI 60947-4-1
CEI 60947-1
EN 60947-1
EN 60947-4-1
JIS C8201-4-1

thermal dissipation 8…9.8W

storage room temperature -60…80 °C

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1F225Q7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud ettevõtetele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F225Q7 - Schneider Electric

Kas BaltElec pakub LC1F225Q7 jaoks hulgihinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1F225Q7, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on LC1F225Q7 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
Kas LC1F225Q7 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F225Q7 sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; projektid ja suuremad kogused hinnastame eraldi.

Hiljuti vaadatud

LC1F225Q7 - Schneider Electric

TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - mähis 380Vac

749,19 € KM-ta

929,00 € KM-ga

Tellimisel

Korvis