Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
LC1F225E7 - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis - Schneider Electric - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis - Schneider Electric - 0
LC1F225E7 - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis - Schneider Electric - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis - Schneider Electric - 0
Tellimisel

LC1F225E7 – Schneider Electric

EAN: 3389110459975
986,03 € KM-ta
1 222,68 € KM-ga
TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis - Schneider Electric
 Korvis
1 222,68 €
SPETSIFIKATSIOONID
Default
Seeria TeSyS F
Main
product range TeSys F
Range TeSys
[uc] control circuit voltage 48 V AC 40...400 Hz
job category AC-3
AC-1
AC-4
name of the device LC1F
switch application Resistive load (AC-1)
Motor control (AC-3)
type of product or equipment contactor
[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C
control circuit type AC at 40...400 Hz
composition of the power pole contacts 3F
motor power kW 110 kW at 380...400 V AC 50/60 Hz (AC-3)
110 kW at 415 V AC 50/60 Hz (AC-3)
110 kW at 440 V CA 50/60 Hz (AC-3)
129 kW at 500 V AC 50/60 Hz (AC-3)
129 kW at 660...690 V AC 50/60 Hz (AC-3)
63 kW at 220...230 V CA 50/60 Hz (AC- 3)
40 kW at 400 V AC 50/60 Hz (AC-4)
average impedance 0,32 mOhm - Ith 315 A 50 Hz
Complementary
[ie] rated operational current 315 A (at <40°C) at <= 440 V AC-1
225 A (at <55°C) at <= 440 V AC-3
[ue] rated operational voltage <= 460 V CC
<= 690 V CA 50/60 Hz
compatibility code LC1F
[ics] rated service breaking capacity 1800 A conforming to IEC 60947-4-1
[icw] rated short-time withstand current 1800 A at <40°C - 10 s
1000 A at <40°C - 30 s
850 A at <40°C - 1 min
560 A at <40°C - 3 min
440 A at <40°C - 10 min
[ith] conventional thermal current 315A at <40°C)
caliber of the fuse to be associated 315 A gG at <= 440 V
250 A aM at <= 440 V
Handle front plate colour 197 mm
tightening torque Remote control: 1.2 Nm
Power circuit: 35 Nm
[uimp] rated impulse withstand voltage 8 kV
average fuel consumption when going 9.9 VA, 40...400 Hz cos phi 0.9 (at 20°C)
mechanical life 10 Mcycles
product weight 4,75 kg
average consumption on call going 1070 VA, 40...400 Hz cos phi 0.9 (at 20°C)
connection mode Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without end cable
length Remote control: screw clamp terminals 2 cable(s) 1...4 mm² rigid without cable end
Power circuit: bar 2 cable(s) - busbar section: 32 x 4 mm
Power circuit: ring terminals 1 cable(s) 185 mm²
Power circuit: connector 1 cable(s) 185 mm²
Power circuit: connection by bolting
control circuit voltage range Operational: 0.85…1.1 Uc 40...400 Hz (at 55 °C)
Level loss: 0.2...0.55 Uc 40...400 Hz (at 55 °C)
width (w) 168,5 mm
depth 181 mm
engine power range 55…100 kW at 200…240 V 3 phases
110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases
mounting bracket Platinum
operating time 35 ms closing (at Uc)
130 ms opening (at Uc)
power loss per pole 32 W AC-1
16 W AC-3
max command speed 2400 cycles/h at <55°C
contactor coil voltage 48 V CA standard
motor starter type Direct line contactor
Poles description 3P
Environment
ip degree of protection IP20 front face with protectors conforming to IEC 60529
IP20 front face with protectors conforming to VDE 0106
operating altitude 3000 m without current reduction
product certificates CB
RMRoS
ABS
CSA
UL
BV
DNV
RINA
LROS (Lloyds register of shipping)
UKCA
ambient air temperature for operation -40…70 °C
operating ambient temperature -5…55 °C
overvoltage category III
standards EN 60947-1
CEI 60947-1
JIS C8201-4-1
EN 60947-4-1
CEI 60947-4-1
thermal dissipation 8…9.8W
storage room temperature -60…80 °C
protective treatment TH
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F225E7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

  • Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F225E7 - Schneider Electric

Hiljuti vaadatud
LC1F225E7 - Schneider Electric - TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis
LC1F225E7 - Schneider Electric
TeSys LC1F - kontaktor - 3P - AC-3 440V - 225A - 48Vac mähis
986,03 € KM-ta
1 222,68 € KM-ga
Tellimisel