LC1F225BD - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 225 A mähis 24 V DC - Schneider Electric - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 225 A mähis 24 V DC - Schneider Electric - 0

Tellimisel

LC1F225BD – Schneider Electric

965,34 € KM-ta

1 197,02 € KM-ga

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 225 A mähis 24 V DC - Schneider Electric

Korvis

1 197,02 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Contactor application Resistive load
Motor control

Device short name LC1F

Range TeSys

[uc] control circuit voltage 24 V DC

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type DC standard

motor power kW 110 kW at 380...400 V AC 50/60 Hz (AC-3)
110 kW at 415 V AC 50/60 Hz (AC-3)
110 kW at 440 V AC 50/60 Hz (AC-3)
129 kW at 500 V AC 50/60 Hz (AC-3)
129 kW at 660...690 V AC 50/60 Hz (AC-3)
63 kW at 220...230 V AC 50/60 Hz (AC-3)
40 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.32 mOhm - Ith 315 A 50 Hz

Complementary

[ie] rated operational current 315 A (at <40 °C) at <= 440 V AC-1
225 A (at <55 °C) at <= 440 V AC-3

[ue] rated operational voltage <= 460 V DC
<= 690 V AC 50/60 Hz

compatibility code LC1F

[ics] rated service breaking capacity 1800 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1800 A 40 °C - 10 s
1000 A 40 °C - 30 s
850 A 40 °C - 1 min
560 A 40 °C - 3 min
440 A 40 °C - 10 min

[ith] conventional thermal current 315 A (at 40 °C)

Product certifications CB
DNV
BV
ABS
UL
CSA
RMRoS
RINA
LROS (Lloyds register of shipping)
UKCA

Handle front plate colour 197 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 35 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 32 x 4 mm
Power circuit: lugs-ring terminals 1 cable(s) 185 mm²
Power circuit: connector 1 cable(s) 185 mm²
Power circuit: bolted connection

Associated fuse rating 315 A gG at <= 440 V
250 A aM at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc (at 55 °C)
Drop-out: 0.15...0.2 Uc (at 55 °C)

width (w) 168.5 mm

Heat dissipation 5 W

Net weight 4.75 kg

Hold-in power consumption in w 5 W at 20 °C

Mounting support Plate

power dissipation per pole 32 W AC-1
16 W AC-3

depth 181 mm

inrush power in w 800 W (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 30...40 ms closing
30...50 ms opening

contactor coil voltage 24 V DC standard

Motor power range 55…100 kW at 200…240 V 3 phases
110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-1
AC-4
AC-3

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards IEC 60947-4-1
EN 60947-4-1
JIS C8201-4-1
EN 60947-1
IEC 60947-1

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F225BD on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F225BD - Schneider Electric

Kas teie pakute LC1F225BD jaoks mahupõhist hinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1F225BD, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on LC1F225BD saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1F225BD firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F225BD sobib minu projekti?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F225BD - Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 225 A mähis 24 V DC

965,34 € KM-ta

1 197,02 € KM-ga

Tellimisel

Korvis