Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
LC1F1504 - TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta. - Schneider Electric - TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta. - Schneider Electric - 0
LC1F1504 - TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta. - Schneider Electric - TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta. - Schneider Electric - 0
Tellimisel

LC1F1504 – Schneider Electric

EAN: 3389110122374
TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta. - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria TeSyS F
Main
Range TeSys
[uc] control circuit voltage 24...575 V AC 40...400 Hz with coil LX1/LX9
24...460 V DC with coil LX4
100...250 V AC 50/60 Hz with coil LXE
100...380 V DC with LXE coil
job category AC-1
name of the device LC1F
switch application Resistive load (AC-1)
type of product or equipment contactor
Product Name TeSys F
[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C
composition of the power pole contacts 4F
average impedance 0,35 mOhm - Ith 250 A 50 Hz
Complementary
[ie] rated operational current 250 A (at <40°C) at <= 440 V AC-1
[ue] rated operational voltage <= 690 V CA 50/60 Hz
<= 460 V CC
compatibility code LC1F
[ics] rated service breaking capacity 1200 A conforming to IEC 60947-4-1
[icw] rated short-time withstand current 1200 A at <40°C - 10 s
700 A at <40°C - 30 s
600 A at <40°C - 1 min
450 A at <40°C - 3 min
350 A at <40°C - 10 min
[ith] conventional thermal current 250A at <40°C)
caliber of the fuse to be associated 250 A gG at <= 440 V
Handle front plate colour 170 mm
tightening torque Power circuit: 18 Nm
Remote control: 1.2 Nm
Remote control: 0.6 Nm
[uimp] rated impulse withstand voltage 8 kV
average fuel consumption when going 6.6…8.1 VA
3.94…4.83 VA
4.5…7.0 VA
2.5…4.0 VA
product weight 3,83 kg
average consumption on call going 690…855 VA, 40...400 Hz cos phi 0.9 (at 20 °C) with LX1/LX9 coil
543…665 VA (at 20 °C) with LX4 coil
280…310 VA, 50/60 Hz cos phi 0.5 (at 20 °C) with LXE coil
270…320 VA (at 20 °C) with LXE coil
connection mode Power circuit: ring terminals 1 cable(s) 120 mm² - busbar section: 25 x 3 mm
Power circuit: connector 1 cable(s) 120 mm²
Power circuit: bar 2 cable(s)
Power circuit : connection by bolting
Remote control: screw clamp terminals 1 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm² flexible with cable end
Remote control: screw terminal blocks clamp 1 cable(s) 1...4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1...2.5 mm²rigid without cable end
Remote control: screw clamp terminals 1 cable(s) 1... 4 mm²
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²
Remote control: screw clamp terminals 1.0 cable(s) 0.2...2.5 mm²flexible without cable end
Remote control: screw clamp terminals 1.0 cable(s) 0.25...2.5 mm²flexible with cable end cable
cross-section Remote control: screw clamp terminals 1.0 cable(s) 0.2...2.5 mm²rigid without cable end
control circuit voltage range Operational: 0.85…1.1 Uc AC 40...400 Hz
Level loss: 0.2...0.55 Uc AC 40...400 Hz
Operational: 0.85…1.1 Uc DC
Loss level loss: 0.15...0.2 Uc DC
Operational: 85...275 V AC 50/60 Hz
Level loss: 0...60 V AC 50/60 Hz
Operational: 85...418 V DC
Loss level: 0...45 V DC
mechanical endurance 10 Mcycles
width (w) 200,5 mm
mechanical robustness Open contactor vibrations: 2 Gn, 5 to 300 Hz
Closed contactor vibrations: 6 Gn, 5 to 300 Hz
Open contactor shocks: 9 Gn for 1/2 sine wave (11 ms)
Closed contactor shocks: 15 Gn for 1/2 sine wave( 11ms)
rated rms inrush power 1500 A conforming to IEC 60947-4-1
depth 171 mm
mounting bracket Platinum
operating time 35 ms closing for with LX1/LX9 coil
130 ms opening for with LX1/LX9 coil
30…40 ms closing for with LX4 coil
30…50 ms opening for with LX4 coil
40…80 ms closing for with LXE coil
6...54 ms opening for with LXE coil
power loss per pole 22 W AC-1
max command speed 2400 cycles/h at <55°C
Poles description 4P
Environment
ip degree of protection IP2x front face with guards conforming to IEC 60529
IP2x front face with guards conforming to VDE 0106
operating altitude 3000 m without current reduction
product certificates ABS
CSA
BV
CB
RINA
RMRoS
DNV
LROS (Lloyds register of shipping)
UL
UKCA
ambient air temperature for operation 60…70 °C at Uc
overvoltage category III
standards EN 60947-1
JIS C8201-4-1
CEI 60947-1
CEI 60947-4-1
EN 60947-4-1
thermal dissipation 5,9…7,2 W
2,2…2,5 W
operating ambient air temperature -40…60 °C
storage room temperature -60…80 °C
protective treatment TH
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1F1504 Schneider Electric on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

  • Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F1504 - Schneider Electric

Hiljuti vaadatud
LC1F1504 - Schneider Electric - TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta.
LC1F1504 - Schneider Electric
TeSys LC1F - kontaktor - 4P - AC-1 440V 250A - ilma mähiseta.
Tellimisel