Main
product range
TeSys F
Range
TeSys
[uc] control circuit voltage
230 V AC 40...400 Hz
job category
AC-1
name of the device
LC1F
switch application
Resistive load (AC-1)
type of product or equipment
contactor
[ui] rated insulation voltage
1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C
control circuit type
AC at 40...400 Hz
composition of the power pole contacts
4F
average impedance
0,37 mOhm - Ith 200 A 50 Hz
Complementary
[ie] rated operational current
200 A (at <40°C) at <= 440 V AC-1
[ue] rated operational voltage
<= 690 V CA 50/60 Hz
<= 460 V CC
compatibility code
LC1F
[ics] rated service breaking capacity
920 A conforming to IEC 60947-4-1
[icw] rated short-time withstand current
1100 A at <40°C - 10 s
640 A at <40°C - 30 s
520 A at <40°C - 1 min
400 A at <40°C - 3 min
320 A at <40°C - 10 min
[ith] conventional thermal current
200A at <40°C)
caliber of the fuse to be associated
125 A aM at <= 440 V
200 A gG at <= 440 V
Handle front plate colour
162 mm
tightening torque
Power circuit: 10 Nm
Remote control: 1.2 Nm
[uimp] rated impulse withstand voltage
8 kV
average fuel consumption when going
8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
mechanical life
10 Mcycles
product weight
3,83 kg
average consumption on call going
770 VA, 40...400 Hz cos phi 0.9 (at 20°C)
connection mode
Power circuit: bar 2 cable(s) - busbar section: 20 x 3 mm
Power circuit: ring terminals 1 cable(s) 95 mm²
Power circuit: connector 1 cable(s) 95 mm²
Remote control: terminal blocks screw clamp 1 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 1 cable(s) 1 …4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without cable end
Remote control : screw clamp terminals 2 cable(s) 1...4 mm²rigid without cable end
Power circuit: connection by bolting
control circuit voltage range
Operational: 0.85…1.1 Uc 40...400 Hz (at 55 °C)
Level loss: 0.2...0.55 Uc 40...400 Hz (at 55 °C)
width (w)
200,5 mm
depth
171 mm
mounting bracket
Platinum
operating time
35 ms closing (at Uc)
130 ms opening (at Uc)
power loss per pole
15 W AC-1
max command speed
2400 cycles/h at <55°C
Poles description
4P
Environment
ip degree of protection
IP2x front face with guards conforming to IEC 60529
IP2x front face with guards conforming to VDE 0106
operating altitude
3000 m without current reduction
product certificates
CCC
LROS (Lloyds register of shipping)
DNV
RMRoS
ABS
RINA
BV
UL
CB
UKCA
ambient air temperature for operation
60…70 °C at Uc
operating ambient temperature
-40…60 °C
overvoltage category
III
standards
CEI 60947-4-1
EN 60947-4-1
EN 60947-1
CEI 60947-1
JIS C8201-4-1
thermal dissipation
5.9…7.2W
storage room temperature
-60…80 °C
protective treatment
TH