Main
product range
TeSys F
Range
TeSys
[uc] control circuit voltage
220 V CC
job category
AC-1
name of the device
LC1F
switch application
Resistive load (AC-1)
type of product or equipment
contactor
[ui] rated insulation voltage
1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C
control circuit type
CC standard
composition of the power pole contacts
4F
average impedance
0,37 mOhm - Ith 200 A 50 Hz
Complementary
[ie] rated operational current
200 A (at <40°C) at <= 440 V AC-1
[ue] rated operational voltage
<= 690 V CA 50/60 Hz
<= 460 V CC
compatibility code
LC1F
[ics] rated service breaking capacity
920 A conforming to IEC 60947-4-1
[icw] rated short-time withstand current
1100 A at <40°C - 10 s
640 A at <40°C - 30 s
520 A at <40°C - 1 min
400 A at <40°C - 3 min
320 A at <40°C - 10 min
[ith] conventional thermal current
200A at <40°C)
caliber of the fuse to be associated
125 A aM at <= 440 V
200 A gG at <= 440 V
average consumption on hold in w
4.5W at 20°C
Handle front plate colour
162 mm
tightening torque
Power circuit: 10 Nm
Remote control: 1.2 Nm
[uimp] rated impulse withstand voltage
8 kV
mechanical life
10 Mcycles
product weight
3,83 kg
connection mode
Power circuit: bar 2 cable(s) - busbar section: 20 x 3 mm
Power circuit: ring terminals 1 cable(s) 95 mm²
Power circuit: connector 1 cable(s) 95 mm²
Remote control: terminal blocks screw clamp 1 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm² flexible without cable end
Remote control: screw clamp terminals 1 cable(s) 1 …4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without cable end
Remote control : screw clamp terminals 2 cable(s) 1...4 mm²rigid without cable end
Power circuit: connection by bolting
control circuit voltage range
Operational: 0.85...1.1 Uc (at 55 °C)
Level loss: 0.15...0.2 Uc (at 55 °C)
width (w)
200,5 mm
depth
171 mm
mounting bracket
Platinum
maximum inrush power in w
560W (at 20°C)
operating time
30…40 ms closing
30…50 ms opening
power loss per pole
15 W AC-1
max command speed
2400 cycles/h at <55°C
Poles description
4P
Environment
ip degree of protection
IP2x front face with guards conforming to IEC 60529
IP2x front face with guards conforming to VDE 0106
operating altitude
3000 m without current reduction
product certificates
ABS
UL
DNV
CCC
CB
RMRoS
RINA
BV
LROS (Lloyds register of shipping)
UKCA
ambient air temperature for operation
60…70 °C at Uc
operating ambient temperature
-40…60 °C
overvoltage category
III
standards
JIS C8201-4-1
EN 60947-1
CEI 60947-4-1
CEI 60947-1
EN 60947-4-1
thermal dissipation
4.5W
storage room temperature
-60…80 °C
protective treatment
TH