Tellimisel
Tellimisel
Tellimisel
Tellimisel
Tellimisel
HMISCU6B5 – Schneider Electric
572,53 € KM-ta
709,94 € KM-ga
3?ќ5 värviline puutetundlik kontrollerpaneel, Dig 8 sisendit/8 väljundit +Ana 4 In/2 Out - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
Harmony STO & STU
Main
Discrete input current
7.83 mA for fast input
5 mA for digital
5 mA for digital
operating system
Harmony
Complementary
Absolute accuracy error
+/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
Product certifications
cULus CSA 22-2 No 142
cUL 1604 Class 1 Division 2
C-Tick
GOST
KCC
cULus 508
UKCA
UKEX
cUL 1604 Class 1 Division 2
C-Tick
GOST
KCC
cULus 508
UKCA
UKEX
Analogue input range
0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
Analogue output range
0...20 mA/4...20 mA (> 300 Ohm) for open-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
Connection pitch
3.5 mm
Handle front plate colour
74.95 mm
Product or component type
Small touch HMI controller
[us] rated supply voltage
24 V (20.4…28.8 V)DC
Backlight lifespan
50000 hours with 65000 colours
inrush current
30 A
nema degree of protection
NEMA 4X front panel
marking
CE
Analogue input number
2 for analog input
2 for RTDs
2 for RTDs
Configurable filtering time
0 ms no filter (none)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
Enclosure material
PC/PBT
processor frequency
333 MHz
Analogue input type
RTD at - 200...600 °C - resolution: 16 bits temperature probe: Pt 100/Pt 1000
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
Discrete output current
2 A 4 A), response time 5 ms with opening contact for digital output
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
Fixing mode
By 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel
Analogue output number
2 resistive load for 12 bits + sign
width (w)
128 mm
Discrete input voltage
24 V DC, discrete input logic: sink or source (positive/negative)
Local signalling
No indicator
maximum pressure
800...1114 hPa
View angle horiz x vert
60° left
60° right
40° top
60° bottom
60° right
40° top
60° bottom
brightness
16 levels via touch panel
Discrete input number
2 for fast input (normal mode) conforming to IEC 61131-2 Type 1
6 for digital input conforming to IEC 61131-2 Type 1
6 for digital input conforming to IEC 61131-2 Type 1
Memory description
Flash NAND, 128 MB
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB
Net weight
0.551 kg
Realtime clock
Built-in
Maximum cable distance between devices
Shielded cable: <10 m for fast input
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input
Discrete output voltage
24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
Isolation between channels
None
Discrete output number
2 fast output (normal mode), output logic: source
6 digital output, output logic: source
6 digital output, output logic: source
Display type
with backlit LED colour TFT LCD
Immunity to microbreaks
10 ms
input impedance
2.81 kOhm
4.7 kOhm
4.7 kOhm
Integrated connection type
1 serial link - RJ45 - RS232/RS485 (rate: <= 115.2 kbits/s)
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9
depth
102 mm
character font
Chinese (simplified Chinese)
ASCII
Taiwanese (traditional Chinese)
Korean
Japanese (ANK, Kanji)
ASCII
Taiwanese (traditional Chinese)
Korean
Japanese (ANK, Kanji)
Device presentation
Complete product
Maximum input frequency
100 kHz for fast input (encoder mode) - control type A/B
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction
downloadable protocols
Modbus TCP/IP
CANopen
Modbus
CANopen
Modbus
Pollution degree
2 conforming to IEC 60664
Power consumption in w
15 W
display resolution
320 x 240 pixels QVGA
display size
3.5 inch
maximum output frequency
100 kHz for fast output (PTO mode)
1 kHz for fast output (PWM mode)
1 kHz for fast output (PWM mode)
Processor name
CPU RISC
Sensor power supply
15…28.8 V DC >= 15 V, current (state 1): >= 5 mA <= 5 V, current (state 0): <= 1.5 mA
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
Input/output number
2 for fast input, terminal(s): FI0...FI1
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
overvoltage protection
With overvoltage protection
Touch panel
Analogue
Number of pages
Limited by internal memory capacity
Shock resistance
147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
Isolation between channels and internal logic
500 V DC
Software designation
SoMachine
Supply
External source
Number of common point
1 for fast input (HSC mode)
1 for digital input
1 for digital input
Environment
Ambient air temp for storage/transportation
-20…60 °C
ip degree of protection
IP20 (rear panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529
operating altitude
<= 2000 m
Range of product
Harmony SCU
ambient air temperature for operation
0…50 °C
electromagnetic compatibility
Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
Environmental characteristics
Corrosive gas free
standards
CSA C22.2 No 213 Class I Division 2
EN 61131-2
IEC 61000-6-2
ANSI/ISA 12-12-01
UL 508
FCC Class A
EN 61131-2
IEC 61000-6-2
ANSI/ISA 12-12-01
UL 508
FCC Class A
Storage altitude
0…10000 m
relative humidity
5…85 % without condensation
vibration resistance
+/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
insulation resistance
> 10 MOhm between the I/O and internal logic
> 10 MOhm between power supply and earth
> 10 MOhm between power supply and earth
KKK ja hinna lisateave
Schneider Electric HMISCU6B5 on toode kategooriast Puuteekraanid, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.
- Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
- Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
- Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.
Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele HMISCU6B5 - Schneider Electric
-
Kas teie pakute HMISCU6B5 jaoks mahupõhist hinda?
Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: HMISCU6B5, Schneider Electric, 10tk), et koostaksime projekti pakkumise.
-
Milline on HMISCU6B5 saadavus ja tarneaeg Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja partii saadavusest; kinnitame pakkumisega.
-
Kas HMISCU6B5 firmalt Schneider Electric on autentne?
Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
-
Kas HMISCU6B5 sobib minu rakendusse?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub kohaletoimetamine ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
HMISCU6B5 - Schneider Electric
3?ќ5 värviline puutetundlik kontrollerpaneel, Dig 8 sisendit/8 väljundit +Ana 4 In/2 Out
572,53 € KM-ta
709,94 € KM-ga
Tellimisel
Teie avaldus on edukalt saadetud