Tellimisel
HMISBC – Schneider Electric
515,50 € KM-ta
639,22 € KM-ga
Kontroller, Harmony SCU, tagumise mooduli paneel, Dig 8 sisendit/8 väljundit +Ana 4 In/2 Out - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
Harmony STO & STU
Main
Discrete input current
7.83 mA for fast input
5 mA for digital
5 mA for digital
operating system
Harmony
Complementary
Absolute accuracy error
+/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
Product certifications
cULus 508
cUL 1604 Class 1 Division 2
C-Tick
cULus CSA 22-2 No 142
GOST
KCC
UKCA
UKEX
cUL 1604 Class 1 Division 2
C-Tick
cULus CSA 22-2 No 142
GOST
KCC
UKCA
UKEX
Analogue input range
0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
Analogue output range
0...20 mA/4...20 mA (> 300 Ohm) for open-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
Connection pitch
3.5 mm
Handle front plate colour
50.65 mm
Product or component type
Controller
[us] rated supply voltage
24 V (20.4…28.8 V)DC
inrush current
30 A
nema degree of protection
NEMA 4X front panel
marking
CE
Analogue input number
2 for analog input
2 for RTDs
2 for RTDs
Configurable filtering time
0 ms no filter (none)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
Enclosure material
PC/PBT
processor frequency
333 MHz
Analogue input type
RTD at - 200...600 °C - resolution: 16 bits temperature probe: Pt 100/Pt 1000
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
Discrete output current
2 A 4 A), response time 5 ms with opening contact for digital output
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
Fixing mode
By 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel
Analogue output number
2 resistive load for 12 bits + sign
width (w)
128 mm
Discrete input voltage
24 V DC, discrete input logic: sink or source (positive/negative)
Local signalling
No indicator
maximum pressure
800...1114 hPa
Discrete input number
2 for fast input (normal mode) conforming to IEC 61131-2 Type 1
6 for digital input conforming to IEC 61131-2 Type 1
6 for digital input conforming to IEC 61131-2 Type 1
Memory description
Flash NAND, 128 MB
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB
Net weight
0.398 kg
Realtime clock
Built-in
Maximum cable distance between devices
Shielded cable: <10 m for fast input
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input
Discrete output voltage
24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
Isolation between channels
None
Discrete output number
2 fast output (normal mode), output logic: source
6 digital output, output logic: source
6 digital output, output logic: source
Immunity to microbreaks
10 ms
input impedance
2.81 kOhm
4.7 kOhm
4.7 kOhm
Integrated connection type
1 serial link - RJ45 - RS232/RS485 (rate: <= 115.2 kbits/s)
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9
depth
102 mm
Device presentation
Basic element
Maximum input frequency
100 kHz for fast input (encoder mode) - control type A/B
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction
downloadable protocols
Modbus
CANopen
Modbus TCP/IP
CANopen
Modbus TCP/IP
Pollution degree
2 conforming to IEC 60664
Power consumption in w
15 W
maximum output frequency
100 kHz for fast output (PTO mode)
1 kHz for fast output (PWM mode)
1 kHz for fast output (PWM mode)
Processor name
CPU RISC
Sensor power supply
15…28.8 V DC >= 15 V, current (state 1): >= 5 mA <= 5 V, current (state 0): <= 1.5 mA
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
Input/output number
2 for fast input, terminal(s): FI0...FI1
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
overvoltage protection
With overvoltage protection
Number of pages
Limited by internal memory capacity
Shock resistance
147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
Isolation between channels and internal logic
500 V DC
Software designation
SoMachine
Supply
External source
Number of common point
1 for fast input (HSC mode)
1 for digital input
1 for digital input
Environment
Ambient air temp for storage/transportation
-20…60 °C
ip degree of protection
IP20 (rear panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529
operating altitude
<= 2000 m
Range of product
Harmony SCU
ambient air temperature for operation
0…50 °C
electromagnetic compatibility
Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
Environmental characteristics
Corrosive gas free
standards
UL 508
FCC Class A
EN 61131-2
CSA C22.2 No 213 Class I Division 2
ANSI/ISA 12-12-01
IEC 61000-6-2
FCC Class A
EN 61131-2
CSA C22.2 No 213 Class I Division 2
ANSI/ISA 12-12-01
IEC 61000-6-2
Storage altitude
0…10000 m
relative humidity
5…85 % without condensation
vibration resistance
+/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
insulation resistance
> 10 MOhm between the I/O and internal logic
> 10 MOhm between power supply and earth
> 10 MOhm between power supply and earth
KKK ja hinna lisateave
HMISBC Schneider Electric on lahendus kategooriast Puuteekraanid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.
- Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
- Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
- Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.
Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele HMISBC - Schneider Electric
-
Kas teie pakute HMISBC jaoks mahupõhist hinda?
Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: HMISBC, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
-
Milline on HMISBC saadavus ja tarneaeg Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
-
Kas HMISBC firmalt Schneider Electric on originaaltoode?
Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
-
Kas HMISBC sobib minu rakendusse?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub kohaletoimetamine ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.
Hiljuti vaadatud
HMISBC - Schneider Electric
Kontroller, Harmony SCU, tagumise mooduli paneel, Dig 8 sisendit/8 väljundit +Ana 4 In/2 Out
515,50 € KM-ta
639,22 € KM-ga
Tellimisel
Teie avaldus on edukalt saadetud