Main
product range
Modicon Transformer Optimized
protection cover
Without
secondary winding
Unique
type of product or equipment
Safety and isolation transformer
Complementary
electrical insulation class
Class B
max voltage drop at rated load
0.9%
Handle front plate colour
81,0 mm
product weight
2,87 kg
rated power in va
160 VA
fixing method
By 4 screws (diameter: 5.8 mm on vertical panel, operating position: horizontal
By 4 screws (diameter: 5.8 mm on vertical panel, operating position: vertical
By 4 screws (diameter: 5.8 mm on panel horizontal with 90% load reduction
marking
THIS
network frequency limits
47…63 Hz
connection mode
for input connection: screw type terminals, connection capacity: 5 x 4 mm² AWG 11
for input ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 11
for output connection: screw type, connection capacity: 2 x 4 mm² AWG 11
output voltage
230 V CA
width (w)
105,0 mm
input voltage limits
207...253V
360...440V
no-load losses (without tolerance)
9.1W
sustained output overvoltage
7% (no load, under voltage)
depth
112,0 mm
power dissipation in w
21.8W
tension de court-circuit
8.62%
input voltage tolerance
+/- 15V
yield
88,00%
input voltage
230 V AC single-phase, connection(s): N-L1
400 V AC phase-phase, connection(s): L1-L2
dielectric strength
2000 V between winding and ground
4000 V between primary and secondary
output protection type
Against overload, protection technology: with additional protection fuses or circuit breakers in Protection selection
Against overvoltage, protection technology: with additional protection fuses or circuit breakers in Protection selection
Against short-circuits, protection technology: with additional protection fuses or circuit breakers in Protection Selection
Environment
degree of protection (ip)
IP20
environment characteristic
EMC conforming to EN 62041
Safety conforming to EN 61558-1
Safety conforming to EN 61558-2-4
operating altitude
3000 m
product certificates
UR
EAC
DNV-GL
operating ambient temperature
-20…50 °C
overvoltage category
Class I conforming to VDE 0106-1
standards
UL 506
storage room temperature
-40…80 °C
protective treatment
TC