Main
product range
Harmony Time Delay Relay
type of product or equipment
Single function relay
rated output current
0,7 A
timer type
Switching power
component name
RE17L
Complementary
maximum output current
20 A
[un] rated nominal voltage
24…240 V CA/CC 50/60 Hz
compatibility code
RE17
[ics] rated service breaking capacity
0.5 A AC/DC conforming to UL
0.7 A AC/DC at 20 °C
tightening torque
0.6...1 Nm conforming to IEC 60947-1
[uimp] rated impulse withstand voltage
5 kV pendant 1,2/50 µs
case material
Auto-extinguible
maximum voltage drop
<4V 3-wire
<8V 2-wire
minimum switching current
10 mA
product weight
0,068 kg
marking
THIS
maximum differential current
5 mA
power consumed in va
0…3 VA at 240 V AC
reset time
350 ms on dropout typical
escape distance
4 kV/3 conforming to IEC 60664-1
connection mode
Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) rigid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) rigid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16 ) flexible with tip
duty cycle
one hundred %
safety reliability data
MTTFd = 353.8 years
B10d = 320000
width (w)
17,5 mm
power frequency
50...60 Hz +/- 5 %
power-on delay
100 ms
temperature drift
+/- 0,05 %/°C
voltage drift
+/- 0.2%/V
timing range
1…10 s
10…100 H
6…60 s
0,1…1 s
1…10 min
6…60 min
1…10 H
functionality
Timer with on-delay
mounting bracket
35 mm DIN rail conforming to EN/IEC 60715
electrical stamina
100000000 cycle
operating frequency
10 Hz
repeat accuracy
+/- 0.5% conforming to IEC 61812-1
control signal pulse width
0.05s typical
mounting position
Any position relative to the normal vertical mounting plane
maximum power consumption in w
1,5 W à 240 V CC
order type
Front panel selector
voltage range of use
0.85 to 1.1 Us
dielectric strength
2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1
exact adjustment of the delay time
+/- 10 % full scale at 25 °C conforming to IEC 61812-1
maximum cut-off voltage
250 V CA/CC
logic output type
Static
Environment
ip degree of protection
IP20 conforming to IEC 60529 (terminal block)
IP40 conforming to IEC 60529 (enclosure)
IP50 conforming to IEC 60529 (front face)
product certificates
GL
CSA
cULus
derating coefficient
5mA/°C
electromagnetic compatibility
Electrostatic discharge immunity test: (in contact) 3.6 kV level conforming to IEC 6100-4-11
Electrostatic discharge immunity test: (in air) 3.8 kV level conforming to IEC 6100-4-11
Electromagnetic field disturbance: (80 MHz to 1 GHz) level 3.10 V/m conforming to IEC 61000-4-3
Electrical fast transient immunity test: (capacitive connection clip ) ,3.1 kV level conforming to IEC 61000-4-4
Electrical fast transient immunity test: (direct) ,3.2 kV level conforming to IEC 61000-4-4 Power
wave immunity test 1.2/50 µs shock: (differential mode) ,3.1 kV level conforming to IEC 61000-4-5
1.2/50 µs shock waves immunity test: (common mode) ,3.2 kV level conforming to IEC 61000-4-5
Conducted RF disturbances: (0.15...80 MHz) ,level 3.10 V conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test: (1 cycle) .0 % conforming to IEC 61000-4-11 Voltage
dips and interruptions immunity test voltage: (25/30 cycles) .70 % conforming to IEC 61000-4-11
Conducted and radiated emissions: .class B conforming to EN 55022
immunity to micro-breaks
20 ms
operating ambient temperature
-20…60 °C
standards
2004/108/EC
EN 61000-6-1
2006/95/EC
EN 61000-6-3
EN 61000-6-2
CEI 61812-1
EN 61000-6-4
relative humidity
93 % non-condensing conforming to IEC 60068-2-30
storage room temperature
-30…60 °C
mechanical shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
vibration resistance
20 m/s² (f= 10...150 Hz) conforming to IEC 60068-2-6
insulation resistance
100 MΩ at 500 V DC conforming to IEC 60664-1