Tellimisel
LUB12 – Schneider Electric
EAN: 3389110362770
54,67 € KM-ta
67,78 € KM-ga
TeSys U - toitepõhi - 12A - juhtimiskontuur kruviklambrite klemmidega - Schneider Electric
BaltElec ladu
Laost otsas
Tarnija ladu
Laos
Olemas, oodata 5-7 päeva pärast
SPETSIFIKATSIOONID
Default
Seeria
TeSyS Ultra
Main
Range
TeSys
sectioning ability
Yes
job category
AC-43
AC-44
AC-41
AC-44
AC-41
name of the device
LUB
type of product or equipment
Non-invertible basic power supply
Product Name
TeSys Ultra
[ui] rated insulation voltage
690 V conforming to IEC 60947-6-2 (pollution degree 3)
600 V conforming to UL 60947-4-1
600 V conforming to CSA C22.2 No 60947-4-1
600 V conforming to UL 60947-4-1
600 V conforming to CSA C22.2 No 60947-4-1
control circuit voltage [uc]
24 V CA 50/60 Hz
24 V CC
48...72 V CA 50/60 Hz
48...72 V CC
110...240 V CA 50/60 Hz
110...220 V CC
24 V CC
48...72 V CA 50/60 Hz
48...72 V CC
110...240 V CA 50/60 Hz
110...220 V CC
Complementary
[ie] rated operational current
12 A at <= 440 V
12 A at 500 V
9 A at 690 V
12 A at 500 V
9 A at 690 V
[ue] rated operational voltage
690 V AC for power circuit
application
Motor control Motor
protection
protection
compatibility code
LUB
[ics] rated service breaking capacity
50 kA at 230 V
50 kA at 440 V
10 kA at 500 V
4 kA at 690 V
50 kA at 440 V
10 kA at 500 V
4 kA at 690 V
[ith] conventional thermal current
12 A
Handle front plate colour
154 mm
tightening torque
0.8…1.2 Nm remote control: 5 mm flat screwdriver
0.8…1.2 Nm remote control: 5 mm Phillips No. 1 screwdriver
1.9…2.5 Nm power circuit: 6 mm flat screwdriver
1, 9…2.5 Nm power circuit: 6 mm Phillips n° 2 screwdriver
1.9…2.5 Nm power circuit: 6 mm pozidriv n°2 screwdriver
0.8…1.2 Nm remote control: 5 mm Phillips No. 1 screwdriver
1.9…2.5 Nm power circuit: 6 mm flat screwdriver
1, 9…2.5 Nm power circuit: 6 mm Phillips n° 2 screwdriver
1.9…2.5 Nm power circuit: 6 mm pozidriv n°2 screwdriver
[uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-6-2
auxiliary contacts
1 "O" + 1 "F"
typical power consumption
130 mA at 24 V DC I maximum when closing with LUCA, LUCB, LUCC, LUCD
140 mA at 24 V AC I maximum when closing with LUCA, LUCB, LUCC, LUCD
150 mA at 24 V DC I maximum when closing closing with LUCM
280 mA at 110...220 V DC I maximum when closing with LUCA, LUCB, LUCC, LUCD
280 mA at 110...240 V AC I maximum when closing with LUCA, LUCB, LUCC , LUCD
280 mA at 48...72 V AC I maximum when closing with LUCA, LUCB, LUCC, LUCD
280 mA at 48...72 V DC I maximum when closing with LUCA, LUCB, LUCC, LUCD
35 mA at 110...220 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 110...240 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 48...72 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 48...72 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
60 mA at 24 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
70 mA at 24 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
70 mA at 24 V DC I eff sealed with LUCM
140 mA at 24 V AC I maximum when closing with LUCA, LUCB, LUCC, LUCD
150 mA at 24 V DC I maximum when closing closing with LUCM
280 mA at 110...220 V DC I maximum when closing with LUCA, LUCB, LUCC, LUCD
280 mA at 110...240 V AC I maximum when closing with LUCA, LUCB, LUCC , LUCD
280 mA at 48...72 V AC I maximum when closing with LUCA, LUCB, LUCC, LUCD
280 mA at 48...72 V DC I maximum when closing with LUCA, LUCB, LUCC, LUCD
35 mA at 110...220 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 110...240 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 48...72 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
35 mA at 48...72 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
60 mA at 24 V DC I eff sealed with LUCA, LUCB, LUCC, LUCD
70 mA at 24 V AC I eff sealed with LUCA, LUCB, LUCC, LUCD
70 mA at 24 V DC I eff sealed with LUCM
product weight
0,9 kg
fixing method
Pinched ( DIN rail)
Screwed (plate)
Screwed (plate)
safe circuit disconnection
400 V SELV between control and auxiliary circuits conforming to IEC 60947-1 appendix N
400 V SELV between control or auxiliary circuit and main circuit conforming to IEC 60947-1 appendix N
400 V SELV between control or auxiliary circuit and main circuit conforming to IEC 60947-1 appendix N
type of auxiliary contacts
connected contacts type (1 NC + 1 NO) conforming to IEC 60947-4-1
mirror contact type (1 NC) conforming to IEC 60947-1
mirror contact type (1 NC) conforming to IEC 60947-1
connection mode
Control circuit: screw clamp terminals 1 cable(s) 0.34...1.5 mm² flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 0.75...1.5 mm² flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 0.75…1.5 mm² rigid
Control circuit: screw clamp terminals 2 cable(s) 0.34…1.5 mm² flexible with cable end
Control circuit: screw clamp terminals screw clamp 2 cable(s) 0.75…1.5 mm² flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 0.75…1.5 mm² rigid
Power circuit: screw terminal blocks clamp 1 cable(s) 1...10 mm² rigid
Power circuit: screw clamp terminals 1 cable(s) 1...6 mm² flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5...10 mm² flexible without cable end Power circuit
: screw clamp terminals 2 cable(s) 1...6 mm² flexible with cable end
power: screw clamp terminals 2 cable(s) 1...6 mm² rigid
Power circuit: screw clamp terminals 2 cable(s) 1.5...6 mm² flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 0.75...1.5 mm² flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 0.75…1.5 mm² rigid
Control circuit: screw clamp terminals 2 cable(s) 0.34…1.5 mm² flexible with cable end
Control circuit: screw clamp terminals screw clamp 2 cable(s) 0.75…1.5 mm² flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 0.75…1.5 mm² rigid
Power circuit: screw terminal blocks clamp 1 cable(s) 1...10 mm² rigid
Power circuit: screw clamp terminals 1 cable(s) 1...6 mm² flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5...10 mm² flexible without cable end Power circuit
: screw clamp terminals 2 cable(s) 1...6 mm² flexible with cable end
power: screw clamp terminals 2 cable(s) 1...6 mm² rigid
Power circuit: screw clamp terminals 2 cable(s) 1.5...6 mm² flexible without cable end
mechanical endurance
15 Mcycles
width (w)
45 mm
immunity to micro cuts
3 ms for remote control
network frequency
40...60 Hz
depth
126 mm
operating time
35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for remote control
50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for remote control
60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for remote control
70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for remote control
75 ms closing with LUCM for remote control
50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for remote control
60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for remote control
70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for remote control
75 ms closing with LUCM for remote control
security reliability level
B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
maximum control speed
3600 cyc/h
Poles description
3P
Environment
ip degree of protection
IP20 conforming to IEC 60947-1 (front face and wired terminal blocks)
IP20 conforming to IEC 60947-1 (other faces)
IP40 conforming to IEC 60947-1 (front face external connection area)
IP20 conforming to IEC 60947-1 (other faces)
IP40 conforming to IEC 60947-1 (front face external connection area)
operating altitude
2000 m
product certificates
CE
UL
CSA
CCC
EAC
ASEFA
ATEX
Marine
UL
CSA
CCC
EAC
ASEFA
ATEX
Marine
standards
EN 60947-6-2
IEC 60947-6-2
UL 60947-4-1, with phase
barrier CSA C22.2 No 60947-4-1, with phase barrier
IEC 60947-6-2
UL 60947-4-1, with phase
barrier CSA C22.2 No 60947-4-1, with phase barrier
fire resistance
960 °C parts supporting live components conforming to IEC 60695-2-12
650 °C conforming to IEC 60695-2-12
650 °C conforming to IEC 60695-2-12
immunity to voltage dips
70 % / 500 ms conforming to IEC 61000-4-11
thermal dissipation
2 W for remote control with LUCA, LUCB, LUCC, LUCD
1.7 W for remote control with LUCM
1.7 W for remote control with LUCM
operating temperature
-25…60°C with LUCM
-25…70°C with LUCA, LUCB, LUCC, LUCD
-25…70°C with LUCA, LUCB, LUCC, LUCD
resistance to radiated fields
10 V/m 3 conforming to IEC 61000-4-3
storage room temperature
-40…85 °C
mechanical shock resistance
10 gn power open poles conforming to IEC 60068-2-27
15 gn power closed poles conforming to IEC 60068-2-27
15 gn power closed poles conforming to IEC 60068-2-27
where of non-dissipative shock
1 kV serial mode 24...240 V AC conforming to IEC 60947-6-2
1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2
2 kV common mode 24...240 V AC conforming to IEC 60947-6-2
2 kV common mode 48...220 V DC conforming to IEC 60947-6-2
1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2
2 kV common mode 24...240 V AC conforming to IEC 60947-6-2
2 kV common mode 48...220 V DC conforming to IEC 60947-6-2
vibration resistance
2 gn (f= 5...300 Hz) power poles open conforming to IEC 60068-2-27
4 gn (f= 5...300 Hz) power poles closed conforming to IEC 60068-2-27
4 gn (f= 5...300 Hz) power poles closed conforming to IEC 60068-2-27
resistance to radioelectric fields
10 V conforming to IEC 61000-4-6
protective treatment
TH conforming to IEC 60068
resistance to electrostatic discharges
8 kV level 3 open air conforming to IEC 6100-4-11
8 kV level 4 contact conforming to IEC 6100-4-11
8 kV level 4 contact conforming to IEC 6100-4-11
resistance to fast transients
2 kV category 3 serial link conforming to IEC 61000-4-4
4 kV category 4 all circuits except for series connections conforming to IEC 61000-4-4
4 kV category 4 all circuits except for series connections conforming to IEC 61000-4-4
KKK ja hinna lisateave
Schneider Electric LUB12 on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.
- Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
- Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
- Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.
Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele LUB12 - Schneider Electric
-
Kas teie pakute LUB12 jaoks hulgihinda?
Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LUB12, 5tk), et koostaksime projekti pakkumise.
-
Milline on LUB12 saadavus ja tarne Baltikumis ja Soomes?
Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja partii saadavusest; kinnitame pakkumisega.
-
Kas LUB12 firmalt Schneider Electric on autentne?
Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
-
Kas LUB12 sobib minu projekti?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub kohaletoimetamine ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
LUB12 - Schneider Electric
TeSys U - toitepõhi - 12A - juhtimiskontuur kruviklambrite klemmidega
54,67 € KM-ta
67,78 € KM-ga
Tellimisel
Tarnija laos
Teie avaldus on edukalt saadetud