LC2D80004P7 - TeSys LC2D - pöördkontaktor - 4P - 4C - AC-1 440V - 125A - 230Vac 50/60Hz. - Schneider Electric - TeSys LC2D - pöördkontaktor - 4P - 4C - AC-1 440V - 125A - 230Vac 50/60Hz. - Schneider Electric - 0

Tellimisel

LC2D80004P7 – Schneider Electric

EAN: 3389110267129

723,12 € KM-ta

896,67 € KM-ga

TeSys LC2D - pöördkontaktor - 4P - 4C - AC-1 440V - 125A - 230Vac 50/60Hz. - Schneider Electric

Korvis

896,67 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS Deca kontaktorid

Main

Range TeSys

[uc] control circuit voltage 230 V AC 50/60Hz

job category AC-1

name of the device LC2D

switch application Resistive load (AC-1)

type of product or equipment Reversing contactor

Product Name TeSys D

[ui] rated insulation voltage Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Power circuit: 1000 V conforming to IEC 60947-4-1

control circuit type AC at 50/60 Hz

composition of the power pole contacts 4F

average impedance 0.8 mOhm - Ith 125 A 50 Hz for power circuit

Complementary

[ie] rated operational current 125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit

[ue] rated operational voltage Power circuit: <= 1000 V AC 25...400 Hz
Power circuit: <= 300 V DC

[ics] rated service breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947

[icw] rated short-time withstand current 135 A at <40°C - 10 min for
320 A power circuit at <40°C - 1 min for
640 A power circuit at <40°C - 10 s for
990 A power circuit at <40°C - 1s for power circuit

[ith] conventional thermal current 125 A at <60 °C) for power circuit

caliber of the fuse to be associated 200 A gG at <= 690 V type 1 coordination for power circuit
160 A gG at <= 690 V type 2 coordination for power circuit

Handle front plate colour 127 mm

tightening torque Remote control: 1.2 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector - with flat screwdriver Ø 6 to Ø 8 mm
Power circuit: 12 Nm - on hexagonal connector with 4 mm screw head
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver

[uimp] rated impulse withstand voltage 8 kV conforming to IEC 60947

average fuel consumption when going 26 VA 60 Hz cos phi 0.3 (at 20°C)
26 VA 50 Hz cos phi 0.3 (at 20°C)

product weight 3,2 kg

electrical life 0.8 Mcycles 125 A AC-1 at Ue <= 690 V

connection mode Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable( s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid
Remote control: screw clamp terminals 2 cable(s) 1…4 mm²rigid
Remote control: screw terminals- clamp 1 cable(s) 1...2.5 mm²flexible with cable end
Power circuit: connector 1 cable(s) 4...50 mm²flexible without cable end
Power circuit: connector 2 cable(s) 4...25 mm²flexible without end cable
Power circuit: connector 1 cable(s) 4...50 mm²flexible with cable end
Power circuit: connector 2 cable(s) 4...16 mm²flexible with cable end
Power circuit: connector 1 cable(s) 4...50 mm²rigid
Power circuit: connector 2 cable(s) 4...25 mm² rigid

type of lock Mechanical

control circuit voltage range 0.3...0.6 Uc -40...55 °C dropout AC 50/60 Hz
0.8...1.1 Uc -40...55 °C operational AC 50 Hz
0.85...1.1 Uc -40 …55 °C operational AC 60 Hz

mechanical endurance 4 Mcycles

width (w) 207 mm

mechanical robustness Contactor open vibrations: 2 Gn, 5 to 300 Hz
Contactor open shocks: 8 Gn for 11 ms
Contactor closed vibrations: 3 Gn, 5 to 300 Hz
Contactor closed shocks: 10 Gn for 11 ms

Flame retardance V1 conforming to UL 94

product presentation Pre-assembled, with pre-wired electrical connections

rated rms inrush power 1100 A at 440 V for power circuit conforming to IEC 60947

depth 158 mm

mounting bracket Rail
Platine

frequency Without

calling power goes 245 VA 60 Hz cos phi 0.75 (at 20°C)
245 VA 50 Hz cos phi 0.75 (at 20°C)

operating time 20…35 ms closing
6…20 ms opening

power loss per pole 12,5 W AC-1

security reliability level B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1

max command speed 3600 cycles/h at <60°C

coil technology Without integrated interference suppression module

Poles description 4P

Environment

degree of pollution 3

ip degree of protection IP20 front face conforming to IEC 60529

operating altitude 0...3000 m

product certificates UL
CSA
RINA
CCC
DNV-GL
LROS (Lloyds register of shipping)
BV
UKCA
EAC
CB

overvoltage category III

standards CSA C22.2 No 60947-4-1
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 60947-4-1
UL 60947-5-1
CSA C22.2 No. 60947-5-1
GB/T 14048.4

fire resistance 850 °C conforming to IEC 60695-2-1

thermal dissipation 6…10 W at 50/60 Hz

operating temperature -40…60 °C
60…70 °C with current reduction

storage room temperature -60…80 °C

climatic resistance conform to IACS E10

protective treatment TH conforming to IEC 60068-2-30

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC2D80004P7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC2D80004P7 - Schneider Electric

Kas teie pakute LC2D80004P7 jaoks hulgihinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC2D80004P7, 5tk), et koostaksime personaalse pakkumise.
Milline on LC2D80004P7 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC2D80004P7 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC2D80004P7 sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC2D80004P7 - Schneider Electric

TeSys LC2D - pöördkontaktor - 4P - 4C - AC-1 440V - 125A - 230Vac 50/60Hz.

723,12 € KM-ta

896,67 € KM-ga

Tellimisel

Korvis