Tellimisel
LC2D18P7 – Schneider Electric
EAN: 3389110386639
93,02 € KM-ta
115,34 € KM-ga
TeSys LC2D - pöördkontaktor - 3P - AC-3 440V - 18A - 230Vac mähis. - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
TeSyS Deca kontaktorid
Main
Range
TeSys
TeSys Deca
TeSys Deca
[uc] control circuit voltage
230 V AC 50/60Hz
job category
AC-3
AC-1
AC-1
name of the device
LC2D
switch application
Resistive load (AC-1)
Motor control (AC-3)
Motor control (AC-3)
type of product or equipment
Reversing contactor
Product Name
TeSys D
TeSys Deca
TeSys Deca
[ui] rated insulation voltage
Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA Certified
Signaling Circuit: 600V UL Certified
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA Certified
Signaling Circuit: 600V UL Certified
control circuit type
AC at 50/60 Hz
engine power hp
1 hp at 115 V AC 60 Hz for single phase motors
3 hp at 230/240 V AC 60 Hz for single phase motors
5 hp at 200/208 V AC 60 Hz for 3 phase motors
5 hp at 230/240 V AC 60 Hz for 3 motor phases
10 hp at 460/480 V AC 60 Hz for 3 motor phases
15 hp at 575/600 V AC 60 Hz for 3 motor phases
3 hp at 230/240 V AC 60 Hz for single phase motors
5 hp at 200/208 V AC 60 Hz for 3 phase motors
5 hp at 230/240 V AC 60 Hz for 3 motor phases
10 hp at 460/480 V AC 60 Hz for 3 motor phases
15 hp at 575/600 V AC 60 Hz for 3 motor phases
composition of the power pole contacts
3F
motor power kW
4 kW at 220...230 V AC 50 Hz
7.5 kW at 380...400 V AC 50 Hz
9 kW at 415...440 V AC 50 Hz
10 kW at 500 V AC 50 Hz
10 kW at 660 ...690 V AC 50 Hz
7.5 kW at 380...400 V AC 50 Hz
9 kW at 415...440 V AC 50 Hz
10 kW at 500 V AC 50 Hz
10 kW at 660 ...690 V AC 50 Hz
average impedance
2.5 mOhm - Ith 32 A 50 Hz for power circuit
Complementary
[ie] rated operational current
18 A (at <60°C) at <= 440 V AC AC-3 for power circuit
32 A (at <60°C) at <= 440 V AC AC-1 for power circuit
32 A (at <60°C) at <= 440 V AC AC-1 for power circuit
[ue] rated operational voltage
Power circuit: <= 690 V AC 25...400 Hz
Power circuit: <= 300 V DC
Power circuit: <= 300 V DC
[ics] rated service breaking capacity
300 A at 440 V for power circuit conforming to IEC 60947
[icw] rated short-time withstand current
40 A at <40°C - 10 min for
84 A power circuit at <40°C - 1 min for
145 A power circuit at <40°C - 10 s for
240 A power circuit at <40°C - 1s for
100 A power circuit - 1s for
120 A signaling circuit - 500 ms for
140 A signaling circuit - 100 ms for signaling circuit
84 A power circuit at <40°C - 1 min for
145 A power circuit at <40°C - 10 s for
240 A power circuit at <40°C - 1s for
100 A power circuit - 1s for
120 A signaling circuit - 500 ms for
140 A signaling circuit - 100 ms for signaling circuit
[ith] conventional thermal current
10 A at <60°C) for signaling circuit
32 A at <60°C) for power circuit
32 A at <60°C) for power circuit
caliber of the fuse to be associated
10 A gG for signaling circuit conforming to IEC 60947-5-1
50 A gG at <= 690 V type 1 coordination for power circuit
35 A gG at <= 690 V type 2 coordination for power circuit
50 A gG at <= 690 V type 1 coordination for power circuit
35 A gG at <= 690 V type 2 coordination for power circuit
Handle front plate colour
77 mm
tightening torque
Power circuit: 1.7 Nm - on screw-clamp terminals - with Ø 6 mm flat screwdriver
Power circuit: 1.7 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Remote control: 1.7 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.7 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Remote control: 1.7 Nm - on screw-clamp terminals - with n°2 pozidriv screwdriver Power
circuit: 2.5 Nm - on screw clamp terminals - with n°2 pozidriv screwdriver
Power circuit: 1.7 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Remote control: 1.7 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.7 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Remote control: 1.7 Nm - on screw-clamp terminals - with n°2 pozidriv screwdriver Power
circuit: 2.5 Nm - on screw clamp terminals - with n°2 pozidriv screwdriver
[uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947
auxiliary contacts
1 "O" + 1 "F"
average fuel consumption when going
7.5 VA 60 Hz cos phi 0.3 (at 20°C)
7 VA 50 Hz cos phi 0.3 (at 20°C)
7 VA 50 Hz cos phi 0.3 (at 20°C)
minimum switching current
5 mA for signaling circuit
product weight
0,707 kg
type of auxiliary contacts
mechanically linked type 1 NC + 1 NO conforming to IEC 60947-5-1
1 NC mirror contact type conforming to IEC 60947-4-1
1 NC mirror contact type conforming to IEC 60947-4-1
electrical life
1.65 Mcycles 18 A AC-3 at Ue <= 440 V
1 Mcycles 32 A AC-1 at Ue <= 440 V
1 Mcycles 32 A AC-1 at Ue <= 440 V
connection mode
Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid
Remote control: screw clamp terminals 2 cable(s) 1…4 mm²rigid
Power circuit : screw clamp terminals 1 cable(s) 1.5…6 mm²flexible without cable end
Power circuit : screw clamp terminals 2 cable( s) 1.5...6 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 1...6 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible with cable end Power circuit: screw clamp
terminals screw clamp 1 cable(s) 1.5...6 mm²rigid
Power circuit: screw clamp terminals 2 cable(s) 1.5...6 mm²rigid
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid
Remote control: screw clamp terminals 2 cable(s) 1…4 mm²rigid
Power circuit : screw clamp terminals 1 cable(s) 1.5…6 mm²flexible without cable end
Power circuit : screw clamp terminals 2 cable( s) 1.5...6 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 1...6 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible with cable end Power circuit: screw clamp
terminals screw clamp 1 cable(s) 1.5...6 mm²rigid
Power circuit: screw clamp terminals 2 cable(s) 1.5...6 mm²rigid
type of lock
Mechanical
control circuit voltage range
0.3...0.6 Uc -40...70 °C dropout AC 50/60 Hz
0.8...1.1 Uc -40...60 °C operational AC 50 Hz
0.85...1.1 Uc -40 …60 °C operational AC 60 Hz
1...1.1 Uc 60…70 °C operational AC 50/60 Hz
0.8...1.1 Uc -40...60 °C operational AC 50 Hz
0.85...1.1 Uc -40 …60 °C operational AC 60 Hz
1...1.1 Uc 60…70 °C operational AC 50/60 Hz
mechanical endurance
15 Mcycles
width (w)
90 mm
mechanical robustness
Contactor open vibrations: 2 Gn, 5 to 300 Hz
Contactor closed vibrations: 4 Gn, 5 to 300 Hz
Contactor open shocks: 10 Gn for 11 ms
Contactor closed shocks: 15 Gn for 11 ms
Contactor closed vibrations: 4 Gn, 5 to 300 Hz
Contactor open shocks: 10 Gn for 11 ms
Contactor closed shocks: 15 Gn for 11 ms
Flame retardance
V1 conforming to UL 94
product presentation
Pre-assembled with reversing busbars
rated rms inrush power
140 A AC for signaling circuit conforming to IEC 60947-5-1
250 A DC for signaling circuit conforming to IEC 60947-5-1
300 A at 440 V for power circuit conforming to IEC 60947
250 A DC for signaling circuit conforming to IEC 60947-5-1
300 A at 440 V for power circuit conforming to IEC 60947
depth
86 mm
mounting bracket
Platine
Rail
Rail
frequency
With
signaling circuit frequency
25 to 400 Hz
calling power goes
70 VA 60 Hz cos phi 0.75 (at 20°C)
70 VA 50 Hz cos phi 0.75 (at 20°C)
70 VA 50 Hz cos phi 0.75 (at 20°C)
operating time
12…22 ms closing
4…19 ms opening
4…19 ms opening
power loss per pole
0,8 W AC-3
2,5 W AC-1
2,5 W AC-1
security reliability level
B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
max command speed
3600 cycles/h at <60°C
minimum switching voltage
17 V for signaling circuit
non-overlap time
1.5 ms on de-
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
coil technology
Without integrated interference suppression module
Poles description
3P
Environment
degree of pollution
3
ip degree of protection
IP20 front face conforming to IEC 60529
operating altitude
0...3000 m
product certificates
DNV
CSA
CCC
UL
GL
LROS (Lloyds register of shipping)
BV
RINA
GOST
UKCA
CSA
CCC
UL
GL
LROS (Lloyds register of shipping)
BV
RINA
GOST
UKCA
overvoltage category
III
standards
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 508
CEI 60335-1
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 508
CEI 60335-1
fire resistance
850 °C conforming to IEC 60695-2-1
thermal dissipation
2…3 W at 50/60 Hz
operating temperature
-40…60 °C
60…70 °C with current reduction
60…70 °C with current reduction
storage room temperature
-60…80 °C
climatic resistance
conforming to IACS E10
conforming to IEC 60947-1 Annex Q category D
conforming to IEC 60947-1 Annex Q category D
protective treatment
TH conforming to IEC 60068-2-30
insulation resistance
> 10 MΩ for signaling circuit
KKK ja hinna lisateave
LC2D18P7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.
- Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
- Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
- Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.
Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele LC2D18P7 - Schneider Electric
-
Kas teie pakute LC2D18P7 jaoks hulgihinda?
Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: LC2D18P7, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
-
Milline on LC2D18P7 saadavus ja tarneaeg Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
-
Kas LC2D18P7 firmalt Schneider Electric on autentne?
Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
-
Kas LC2D18P7 sobib minu projekti?
Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub kohaletoimetamine ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; projektid ja suuremad kogused hinnastame eraldi.
Hiljuti vaadatud
LC2D18P7 - Schneider Electric
TeSys LC2D - pöördkontaktor - 3P - AC-3 440V - 18A - 230Vac mähis.
93,02 € KM-ta
115,34 € KM-ga
Tellimisel
Teie avaldus on edukalt saadetud