LC1K09008G7 - TeSys K kontaktor 4P (2 NO + 2 NC) AC1 <= 440 V 20 A 120 V vahelduvvoolu mähis - Schneider Electric - TeSys K kontaktor 4P (2 NO + 2 NC) AC1 <= 440 V 20 A 120 V vahelduvvoolu mähis - Schneider Electric - 0

Tellimisel

LC1K09008G7 – Schneider Electric

21,50 € KM-ta

26,66 € KM-ga

TeSys K kontaktor 4P (2 NO + 2 NC) AC1 <= 440 V 20 A 120 V vahelduvvoolu mähis - Schneider Electric

BaltElec ladu

Laost otsas

Tarnija ladu

Laos

Olemas, oodata 5-7 päeva pärast

Korvis

26,66 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS K

Main

Contactor application Resistive load

Device short name LC1K

Range TeSys

[uc] control circuit voltage 120 V AC 50/60 Hz

Product Name TeSys K

[ui] rated insulation voltage Power circuit: 600 V conforming to UL 508
Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit: 600 V conforming to CSA C22.2 No 14

control circuit type AC at 50/60 Hz

average impedance 3 mOhm - Ith 20 A 50 Hz for power circuit

Complementary

[ie] rated operational current 20 A (at <50 °C) at <= 440 V AC AC-1 for power circuit
16 A (at <70 °C) at 690 V AC AC-1 for power circuit

[ue] rated operational voltage Power circuit: 690 V AC 50/60 Hz

[ics] rated service breaking capacity 110 A at 415 V conforming to IEC 60947
110 A at 440 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947
110 A at 220...230 V conforming to IEC 60947
110 A at 380...400 V conforming to IEC 60947
70 A at 660...690 V conforming to IEC 60947

[icw] rated short-time withstand current 90 A 50 °C - 1 s for power circuit
85 A 50 °C - 5 s for power circuit
80 A 50 °C - 10 s for power circuit
60 A 50 °C - 30 s for power circuit
45 A 50 °C - 1 min for power circuit
40 A 50 °C - 3 min for power circuit
20 A 50 °C - >= 15 min for power circuit

[ith] conventional thermal current 20 A (at 50 °C) for power circuit

Product certifications CB Scheme
CCC
UL
CSA
EAC
CE
UKCA

Handle front plate colour 58 mm

Product or component type Contactor

tightening torque 0.8…1.3 N.m - on screw clamp terminals Philips No 2
0.8…1.3 N.m - on screw clamp terminals flat Ø 6 mm
0.8…1.3 N.m - on screw clamp terminals pozidriv No 2

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Screw clamp terminals 1 cable(s) 1.5…4 mm²solid
Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end
Screw clamp terminals 1 cable(s) 0.34…2.5 mm²flexible with cable end
Screw clamp terminals 2 cable(s) 1.5…4 mm²solid
Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end
Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end

Associated fuse rating 25 A gG at <= 440 V for power circuit
25 A aM for power circuit

Device application Control

Control circuit voltage limits Operational: 0.8...1.15 Uc (at <50 °C)
Drop-out: 0.2...0.75 Uc (at <50 °C)

width (w) 45 mm

mechanical robustness Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6
Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6

Flame retardance V1 conforming to UL 94
Requirement 2 conforming to NF F 16-101
Requirement 2 conforming to NF F 16-102

Heat dissipation 1.3 W

Net weight 0.18 kg

Hold-in power consumption in va 4.5 VA (at 20 °C)

Mounting support Rail
Plate

depth 57 mm

Inrush power in va 30 VA (at 20 °C)

mechanical durability 10 Mcycles

electrical durability 0.18 Mcycles 20 A AC-1 at Ue <= 440 V

Irms rated making capacity 110 A AC for power circuit conforming to NF C 63-110
110 A AC for power circuit conforming to IEC 60947

Maximum operating rate 3600 cyc/h

operating time 10...20 ms coil de-energisation and NO opening
10...20 ms coil energisation and NO closing
15...25 ms coil de-energisation and NC closing
5...15 ms coil energisation and NC opening

Power pole contact composition 2 NO + 2 NC

Poles description 4P

Utilisation category AC-1

Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

Signalling circuit frequency <= 400 Hz

Environment

Ambient air temp for storage/transportation -50…80 °C

ip degree of protection IP2X conforming to VDE 0106

operating altitude 2000 m without derating

overvoltage category III

standards EN/IEC 60947-4-1
GB/T 14048.4
UL 60947-4-1
CSA C22.2 No 60947-4-1
JIS C8201-4-1

protective treatment TC conforming to IEC 60068
TC conforming to DIN 50016

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1K09008G7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1K09008G7 - Schneider Electric

Kas BaltElec pakub LC1K09008G7 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1K09008G7, 5tk), et koostaksime projekti pakkumise.
Milline on LC1K09008G7 saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1K09008G7 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1K09008G7 sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame logistikapartneriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1K09008G7 - Schneider Electric

TeSys K kontaktor 4P (2 NO + 2 NC) AC1 <= 440 V 20 A 120 V vahelduvvoolu mähis

21,50 € KM-ta

26,66 € KM-ga

Tellimisel Tarnija laos

Korvis