LC1F800MW - TeSys F kontaktor - 3P (3 NO) - AC-3 - <= 440 V 800 A - mähis 220...230 V DC - Schneider Electric - TeSys F kontaktor - 3P (3 NO) - AC-3 - <= 440 V 800 A - mähis 220...230 V DC - Schneider Electric - 0

Tellimisel

LC1F800MW – Schneider Electric

EAN: 3389110790610

3 812,54 € KM-ta

4 727,55 € KM-ga

TeSys F kontaktor - 3P (3 NO) - AC-3 - <= 440 V 800 A - mähis 220...230 V DC - Schneider Electric

Korvis

4 727,55 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

product range TeSys F

Range TeSys

[uc] control circuit voltage 220...230 V CC
220...240 V CA 40...400 Hz

job category AC-4
AC-1
AC-3

name of the device LC1F

switch application Motor control (AC-3)
Resistive load (AC-1)

type of product or equipment contactor

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C

control circuit type Standard DC
AC at 40...400 Hz

composition of the power pole contacts 3F

motor power kW 450 kW at 1000 V AC 50/60 Hz (AC-3)
450 kW at 500 V AC 50/60 Hz (AC-3)
475 kW at 660...690 V AC 50/60 Hz (AC-3)
110 kW at 400 V AC 50/60 Hz (AC-4)
450 kW at 380...400 V AC 50/60 Hz (AC-3)
450 kW at 415 V AC 50/60 Hz (AC-3)
450 kW à 440 V AC 50/60 Hz (AC-3)
250 kW à 220...230 V AC 50/60 Hz (AC-3)

average impedance 0,12 mOhm - Ith 1000 A 50 Hz

Complementary

[ie] rated operational current 1000 A (at <40°C) at <= 440 V AC AC-1
800 A (at <55°C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V CA 50/60 Hz
<= 460 V CC

compatibility code LC1F

[ics] rated service breaking capacity 6400 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 5500 A at <40°C - 10 s
4600 A at <40°C - 30 s
3600 A at <40°C - 1 min
2600 A at <40°C - 3 min
1700 A at <40°C - 10 min

[ith] conventional thermal current 1000A at <40°C)

caliber of the fuse to be associated 1000 A gG at <= 440 V
800 A aM at <= 440 V

average consumption on hold in w 12W at 20°C

Handle front plate colour 304 mm

tightening torque Remote control: 1.2 Nm
Power circuit: 58 Nm

[uimp] rated impulse withstand voltage 8 kV

mechanical life 5 Mcycles

product weight 18,75 kg

connection mode Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without end cable
length Remote control: screw clamp terminals 2 cable(s) 1...4 mm² rigid without cable end
Power circuit: bar 2 cable(s) - busbar section: 60 x 5 mm
Power circuit: connection by bolting

control circuit voltage range Operational: 0.85...1.1 Uc (at 55 °C)
Level loss: 0.3...0.5 Uc (at 55 °C)

width (w) 309 mm

depth 255 mm

engine power range 250…500 kW at 200…240 V 3 phases
250…500 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases

mounting bracket Platinum

maximum inrush power in w 1900W (at 20°C)

operating time 40…50 ms opening
60…80 ms closing

power loss per pole 120 W AC-1
77 W AC-3

max command speed 600 cycles/h at <55°C

contactor coil voltage 220 V CC standard
230 V CC standard
220 V CA standard
230 V CA standard
240 V CA standard

motor starter type Direct line contactor

Poles description 3P

Environment

ip degree of protection IP20 front face with protectors conforming to IEC 60529
IP20 front face with protectors conforming to VDE 0106

operating altitude 3000 m without current reduction

product certificates ABS
UL
CCC
CSA
RMRoS
CB
UKCA

ambient air temperature for operation -5…55 °C

operating ambient temperature -5…55 °C

overvoltage category III

standards CEI 60947-1
JIS C8201-4-1
EN 60947-4-1
EN 60947-1
CEI 60947-4-1

thermal dissipation 12W

storage room temperature -60…80 °C

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F800MW on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F800MW - Schneider Electric

Kas BaltElec pakub LC1F800MW jaoks mahupõhist hinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1F800MW, 5tk), et koostaksime personaalse pakkumise.
Milline on LC1F800MW saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
Kas LC1F800MW firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F800MW sobib minu projekti?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud parameetrid (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F800MW - Schneider Electric

TeSys F kontaktor - 3P (3 NO) - AC-3 - <= 440 V 800 A - mähis 220...230 V DC

3 812,54 € KM-ta

4 727,55 € KM-ga

Tellimisel

Korvis