LC1F630P7 - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 630 A mähis 230 V AC - Schneider Electric - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 630 A mähis 230 V AC - Schneider Electric - 0

Tellimisel

LC1F630P7 – Schneider Electric

4 173,97 € KM-ta

5 175,72 € KM-ga

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 630 A mähis 230 V AC - Schneider Electric

Korvis

5 175,72 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Contactor application Resistive load
Motor control

Device short name LC1F

Range TeSys

[uc] control circuit voltage 230 V AC 40...400 Hz

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 40...400 Hz

motor power kW 335 kW at 380...400 V AC 50/60 Hz (AC-3)
375 kW at 415 V AC 50/60 Hz (AC-3)
400 kW at 440 V AC 50/60 Hz (AC-3)
400 kW at 500 V AC 50/60 Hz (AC-3)
450 kW at 660...690 V AC 50/60 Hz (AC-3)
450 kW at 1000 V AC 50/60 Hz (AC-3)
200 kW at 220...230 V AC 50/60 Hz (AC-3)
100 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.12 mOhm - Ith 1000 A 50 Hz

Complementary

[ie] rated operational current 1000 A (at <40 °C) at <= 440 V AC AC-1
630 A (at <55 °C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC

compatibility code LC1F

[ics] rated service breaking capacity 5040 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 5050 A 40 °C - 10 s
4400 A 40 °C - 30 s
3400 A 40 °C - 1 min
2200 A 40 °C - 3 min
1600 A 40 °C - 10 min

[ith] conventional thermal current 1000 A (at 40 °C)

Product certifications CB
RINA
BV
RMRoS
UL
CSA
DNV
ABS
LROS (Lloyds register of shipping)
UKCA

Handle front plate colour 304 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 58 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 60 x 5 mm
Power circuit: bolted connection

Associated fuse rating 1000 A gG at <= 440 V
630 A aM at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)
Drop-out: 0.25...0.5 Uc 40...400 Hz (at 55 °C)

width (w) 309 mm

Heat dissipation 20 W

Net weight 18.6 kg

Hold-in power consumption in va 22 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

Mounting support Plate

power dissipation per pole 120 W AC-1
48 W AC-3

depth 255 mm

Inrush power in va 1650 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

mechanical durability 5 Mcycles

Maximum operating rate 1200 cyc/h 55 °C

operating time 40...80 ms closing
100...200 ms opening

contactor coil voltage 230 V AC standard

Motor power range 250…500 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-1
AC-3
AC-4

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards EN 60947-4-1
IEC 60947-4-1
JIS C8201-4-1
IEC 60947-1
EN 60947-1

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F630P7 on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F630P7 - Schneider Electric

Kas BaltElec pakub LC1F630P7 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1F630P7, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on LC1F630P7 saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1F630P7 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F630P7 sobib minu projekti?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F630P7 - Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 630 A mähis 230 V AC

4 173,97 € KM-ta

5 175,72 € KM-ga

Tellimisel

Korvis