LC1F185FD - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 185 A mähis 110 V DC - Schneider Electric - TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 185 A mähis 110 V DC - Schneider Electric - 0

Tellimisel

LC1F185FD – Schneider Electric

858,90 € KM-ta

1 065,04 € KM-ga

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 185 A mähis 110 V DC - Schneider Electric

Korvis

1 065,04 €

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

Contactor application Resistive load
Motor control

Device short name LC1F

Range TeSys

[uc] control circuit voltage 110 V DC

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type DC standard

motor power kW 90 kW at 380...400 V AC 50/60 Hz (AC-3)
100 kW at 415 V AC 50/60 Hz (AC-3)
100 kW at 440 V AC 50/60 Hz (AC-3)
110 kW at 500 V AC 50/60 Hz (AC-3)
110 kW at 660...690 V AC 50/60 Hz (AC-3)
55 kW at 220...230 V AC 50/60 Hz (AC-3)
33 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.33 mOhm - Ith 275 A 50 Hz

Complementary

[ie] rated operational current 275 A (at <40 °C) at <= 440 V AC-1
185 A (at <55 °C) at <= 440 V AC-3

[ue] rated operational voltage <= 460 V DC
<= 690 V AC 50/60 Hz

compatibility code LC1F

[ics] rated service breaking capacity 1480 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1500 A 40 °C - 10 s
920 A 40 °C - 30 s
740 A 40 °C - 1 min
500 A 40 °C - 3 min
400 A 40 °C - 10 min

[ith] conventional thermal current 275 A (at 40 °C)

Product certifications RINA
BV
RMRoS
UL
CB
ABS
CSA
DNV
LROS (Lloyds register of shipping)
UKCA

Handle front plate colour 174 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 18 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm
Power circuit: lugs-ring terminals 1 cable(s) 150 mm²
Power circuit: connector 1 cable(s) 150 mm²
Power circuit: bolted connection

Associated fuse rating 200 A aM at <= 440 V
315 A gG at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc (at 55 °C)
Drop-out: 0.15...0.2 Uc (at 55 °C)

width (w) 168.5 mm

Heat dissipation 5 W

Net weight 4.65 kg

Hold-in power consumption in w 5 W at 20 °C

Mounting support Plate

power dissipation per pole 12 W AC-3
25 W AC-1

depth 181 mm

inrush power in w 800 W (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 30...40 ms closing
30...50 ms opening

contactor coil voltage 110 V DC standard

Motor power range 30…50 kW at 200…240 V 3 phases
55…100 kW at 200…240 V 3 phases
55…100 kW at 380…440 V 3 phases
55…100 kW at 480…500 V 3 phases
110…220 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-3
AC-1
AC-4

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP2X front face with shrouds conforming to IEC 60529
IP2X front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards EN 60947-4-1
JIS C8201-4-1
IEC 60947-4-1
EN 60947-1
IEC 60947-1

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1F185FD Schneider Electric on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud professionaalidele. BaltElec tegeleb mahupõhise müügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F185FD - Schneider Electric

Kas teie pakute LC1F185FD jaoks hulgihinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1F185FD, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on LC1F185FD saadavus ja tarne Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub kogusest ja laoseisust; kinnitame pakkumisega.
Kas LC1F185FD firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F185FD sobib minu rakendusse?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

LC1F185FD - Schneider Electric

TeSys F kontaktor 3P (3 NO) AC3 <= 440 V 185 A mähis 110 V DC

858,90 € KM-ta

1 065,04 € KM-ga

Tellimisel

Korvis