LC1F185E7 - TeSys LC1F - kontaktor - 3P - AC-3 440V - 185A - mähis 48Vac - Schneider Electric - TeSys LC1F - kontaktor - 3P - AC-3 440V - 185A - mähis 48Vac - Schneider Electric - 0

Tellimisel

LC1F185E7 – Schneider Electric

EAN: 3389110351484

TeSys LC1F - kontaktor - 3P - AC-3 440V - 185A - mähis 48Vac - Schneider Electric

SPETSIFIKATSIOONID

Default

Seeria TeSyS F

Main

product range TeSys F

Range TeSys

[uc] control circuit voltage 48 V AC 40...400 Hz

job category AC-3
AC-1
AC-4

name of the device LC1F

switch application Resistive load (AC-1)
Motor control (AC-3)

type of product or equipment contactor

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 gr C

control circuit type AC at 40...400 Hz

composition of the power pole contacts 3F

motor power kW 90 kW at 380...400 V AC 50/60 Hz (AC-3)
100 kW at 415 V AC 50/60 Hz (AC-3)
100 kW at 440 V CA 50/60 Hz (AC-3)
110 kW à 500 V AC 50/60 Hz (AC-3)
110 kW à 660...690 V AC 50/60 Hz (AC-3)
55 kW à 220...230 V CA 50/60 Hz (AC- 3)
33 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0,33 mOhm - Ith 275 A 50 Hz

Complementary

[ie] rated operational current 275 A (at <40°C) at <= 440 V AC-1
185 A (at <55°C) at <= 440 V AC-3

[ue] rated operational voltage <= 460 V CC
<= 690 V CA 50/60 Hz

compatibility code LC1F

[ics] rated service breaking capacity 1480 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1500 A at <40°C - 10 s
920 A at <40°C - 30 s
740 A at <40°C - 1 min
500 A at <40°C - 3 min
400 A at <40°C - 10 min

[ith] conventional thermal current 275A at <40°C)

caliber of the fuse to be associated 200 A aM at <= 440 V
315 A gG at <= 440 V

Handle front plate colour 174 mm

tightening torque Remote control: 1.2 Nm
Power circuit: 18 Nm

[uimp] rated impulse withstand voltage 8 kV

average fuel consumption when going 9.9 VA, 40...400 Hz cos phi 0.9 (at 20°C)

mechanical life 10 Mcycles

product weight 4,65 kg

average consumption on call going 1070 VA, 40...400 Hz cos phi 0.9 (at 20°C)

connection mode Remote control: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 1…4 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1…4 mm²rigid without end cable
length Remote control: screw clamp terminals 2 cable(s) 1...4 mm² rigid without cable end
Power circuit: bar 2 cable(s) - busbar section: 25 x 3 mm
Power circuit: ring terminals 1 cable(s) 150 mm²
Power circuit: connector 1 cable(s) 150 mm²
Power circuit: connection by bolting

control circuit voltage range Operational: 0.85…1.1 Uc 40...400 Hz (at 55 °C)
Level loss: 0.2...0.55 Uc 40...400 Hz (at 55 °C)

width (w) 168,5 mm

depth 181 mm

engine power range 30…50 kW at 200…240 V 3 phases
55…100 kW at 200…240 V 3 phases
55…100 kW at 380…440 V 3 phases
55…100 kW at 480…500 V 3 phases
110…220 kW at 480 …500 V 3 phase

mounting bracket Platinum

operating time 35 ms closing (at Uc)
130 ms opening (at Uc)

power loss per pole 12 W AC-3
25 W AC-1

max command speed 2400 cycles/h at <55°C

contactor coil voltage 48 V CA standard

motor starter type Direct line contactor

Poles description 3P

Environment

ip degree of protection IP2x front face with guards conforming to IEC 60529
IP2x front face with guards conforming to VDE 0106

operating altitude 3000 m without current reduction

product certificates LROS (Lloyds register of shipping)
CSA
ABS
DNV
CB
RMRoS
BV
RINA
UL
UKCA

ambient air temperature for operation -40…70 °C

operating ambient temperature -5…55 °C

overvoltage category III

standards EN 60947-4-1
EN 60947-1
CEI 60947-1
CEI 60947-4-1
JIS C8201-4-1

thermal dissipation 8…9.8W

storage room temperature -60…80 °C

protective treatment TH

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric LC1F185E7 on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1F185E7 - Schneider Electric

Kas teie pakute LC1F185E7 jaoks mahupõhist hinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, LC1F185E7, 5tk), et koostaksime personaalse pakkumise.
Milline on LC1F185E7 saadavus ja tarne Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
Kas LC1F185E7 firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas LC1F185E7 sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; projektid ja suuremad kogused hinnastame eraldi.

Hiljuti vaadatud

LC1F185E7 - Schneider Electric

TeSys LC1F - kontaktor - 3P - AC-3 440V - 185A - mähis 48Vac

Tellimisel