Laos
LC1D95F7 – Schneider Electric
EAN: 3389110451177
204,13 € KM-ta
253,12 € KM-ga
Kontaktor, TeSys Deca, 3P(3NO), AC-3/AC-3e, 440V, 95A, 110V AC 50/60Hz mähis. - Schneider Electric
SPETSIFIKATSIOONID
Default
Seeria
TeSyS Deca kontaktorid
Main
product range
TeSys D
Range
TeSys
[uc] control circuit voltage
110 V AC 50/60 Hz
job category
AC-1
AC-4
AC-3
AC-3e
AC-4
AC-3
AC-3e
name of the device
LC1D
switch application
Motor control (AC-3)
Resistive load (AC-1)
Resistive load (AC-1)
type of product or equipment
contactor
[ui] rated insulation voltage
Power circuit: 1000 V conforming to IEC 60947-4-1
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA Certified
Signaling Circuit: 600V UL Certified
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signaling circuit: 690 V conforming to IEC 60947-1
Signaling circuit: 600 V CSA Certified
Signaling Circuit: 600V UL Certified
control circuit type
AC at 50/60 Hz typical
engine power hp
7.5 hp at 120 VAC 60 Hz for single phase motors
15 hp at 230/240 VAC 60 Hz for single phase motors
30 hp at 200/208 VAC 60 Hz for 3 phase motors
30 hp at 230/240 VAC 60 Hz for 3-phase motors
60 hp at 460/480 V AC 60 Hz for 3-phase motors
60 hp at 575/600 V AC 60 Hz for 3-phase motors
15 hp at 230/240 VAC 60 Hz for single phase motors
30 hp at 200/208 VAC 60 Hz for 3 phase motors
30 hp at 230/240 VAC 60 Hz for 3-phase motors
60 hp at 460/480 V AC 60 Hz for 3-phase motors
60 hp at 575/600 V AC 60 Hz for 3-phase motors
composition of the power pole contacts
3F
motor power kW
25 kW at 220...230 V AC 50 Hz (AC-3)
45 kW at 380...400 V AC 50 Hz (AC-3)
45 kW at 415...440 V AC 50 Hz (AC-3 )
55 kW at 500 V CA 50 Hz (AC-3)
45 kW at 660...690 V CA 50 Hz (AC-3)
45 kW at 1000 V CA 50 Hz (AC-3)
45 kW at 380...400 V AC 50 Hz (AC-3)
45 kW at 415...440 V AC 50 Hz (AC-3 )
55 kW at 500 V CA 50 Hz (AC-3)
45 kW at 660...690 V CA 50 Hz (AC-3)
45 kW at 1000 V CA 50 Hz (AC-3)
average impedance
0.8 mOhm - Ith 125 A 50 Hz for power circuit
Complementary
[ie] rated operational current
95 A (at <60°C) at <= 440 V AC-3 for power circuit
125 A (at <60°C) at <= 690 V AC-1 for power circuit
95 A (at <60°C ) at <= 440 V AC-3e for power circuit
125 A (at <60°C) at <= 690 V AC-1 for power circuit
95 A (at <60°C ) at <= 440 V AC-3e for power circuit
[ue] rated operational voltage
Power circuit: 1000 V AC 25...400 Hz
compatibility code
LC1D
[ics] rated service breaking capacity
1100 A at 440 V for power circuit conforming to IEC 60947
[icw] rated short-time withstand current
1100 A at <40°C - 1s for power circuit
800 A at <40°C - 10 s for power circuit
400 A at <40°C - 1 min for power circuit
135 A at <40°C - 10 min for power circuit
140 A - 100 ms for signaling circuit
120 A - 500 ms for signaling circuit
100 A - 1s for signaling circuit
800 A at <40°C - 10 s for power circuit
400 A at <40°C - 1 min for power circuit
135 A at <40°C - 10 min for power circuit
140 A - 100 ms for signaling circuit
120 A - 500 ms for signaling circuit
100 A - 1s for signaling circuit
[ith] conventional thermal current
10 A at <60°C) for signaling circuit
125 A at <60°C) for power circuit
125 A at <60°C) for power circuit
caliber of the fuse to be associated
10 A gG for signaling circuit conforming to IEC 60947-5-1
200 A gG at <= 690 V type 1 coordination for power circuit
160 A gG at <= 690 V type 2 coordination for power circuit
200 A gG at <= 690 V type 1 coordination for power circuit
160 A gG at <= 690 V type 2 coordination for power circuit
Handle front plate colour
127 mm
tightening torque
Remote control: 1.2 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector - with flat screwdriver Ø 6 to Ø 8 mm
Power circuit: 12 Nm - on hexagonal connector with 4 mm screw head
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector - with flat screwdriver Ø 6 to Ø 8 mm
Power circuit: 12 Nm - on hexagonal connector with 4 mm screw head
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver
[uimp] rated impulse withstand voltage
8 kV conforming to IEC 60947
auxiliary contacts
1 "O" + 1 "F"
average fuel consumption when going
26 VA 60 Hz cos phi 0.3 (at 20°C)
26 VA 50 Hz cos phi 0.3 (at 20°C)
26 VA 50 Hz cos phi 0.3 (at 20°C)
minimum switching current
5 mA for signaling circuit
product weight
1,61 kg
type of auxiliary contacts
mechanically linked type 1 NC + 1 NO conforming to IEC 60947-5-1
1 NC mirror contact type conforming to IEC 60947-4-1
1 NC mirror contact type conforming to IEC 60947-4-1
contact compatibility
M11
electrical life
1,2 Mcycles 95 A AC-3
1,3 Mcycles 125 A AC-1
1,2 Mcycles 95 A AC-3e
1,3 Mcycles 125 A AC-1
1,2 Mcycles 95 A AC-3e
connection mode
Remote control: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw terminal blocks- clamp 1 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 1 1…4 mm² - cable stiffness : rigid without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: rigid without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible without cable end
Power circuit: connector 2 4… 25 mm² - cable stiffness: flexible without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 2 4…16 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 1 4…50 mm² - cable stiffness : rigid without cable end
Power circuit: connector 2 4…25 mm² - cable stiffness: rigid without cable end
Remote control: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw terminal blocks- clamp 1 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 1 1…4 mm² - cable stiffness : rigid without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: rigid without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible without cable end
Power circuit: connector 2 4… 25 mm² - cable stiffness: flexible without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 2 4…16 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 1 4…50 mm² - cable stiffness : rigid without cable end
Power circuit: connector 2 4…25 mm² - cable stiffness: rigid without cable end
control circuit voltage range
0.8 to 1.1 Uc -40…55 °C operational AC 50 Hz
0.85…1.1 Uc -40…55 °C operational AC 60 Hz
0.3 to 0.6 Uc -40…70 °C loss of level AC 50/60 Hz
1...1.1 Uc 55…70 °C operational AC 50/60 Hz
0.85…1.1 Uc -40…55 °C operational AC 60 Hz
0.3 to 0.6 Uc -40…70 °C loss of level AC 50/60 Hz
1...1.1 Uc 55…70 °C operational AC 50/60 Hz
mechanical endurance
4 Mcycles
width (w)
85 mm
mechanical robustness
Open contactor vibrations (2 Gn, 5 to 300 Hz)
Open contactor shocks (8 Gn for 11 ms)
Closed contactor vibrations (3 Gn, 5 to 300 Hz)
Closed contactor shocks (10 Gn for 11 ms)
Open contactor shocks (8 Gn for 11 ms)
Closed contactor vibrations (3 Gn, 5 to 300 Hz)
Closed contactor shocks (10 Gn for 11 ms)
Flame retardance
V1 conforming to UL 94
rated rms inrush power
1100 A at 440 V AC for power circuit conforming to IEC 60947
140 A AC for signaling circuit conforming to IEC 60947-5-1
250 A DC for signaling circuit conforming to IEC 60947-5-1
140 A AC for signaling circuit conforming to IEC 60947-5-1
250 A DC for signaling circuit conforming to IEC 60947-5-1
depth
130 mm
mounting bracket
Rail
Platine
Platine
frequency
With
signaling circuit frequency
25 to 400 Hz
calling power goes
245 VA 60 Hz cos phi 0.75 (at 20°C)
245 VA 50 Hz cos phi 0.75 (at 20°C)
245 VA 50 Hz cos phi 0.75 (at 20°C)
operating time
20…35 ms closing
6…20 ms opening
6…20 ms opening
power loss per pole
12,5 W AC-1
7,2 W AC-3
7,2 W AC-3e
7,2 W AC-3
7,2 W AC-3e
security reliability level
B10d = 1.3 Mcycles contactor with rated load conforming to EN/ISO 13849-1
B10d = 20 Mcycles contactor with mechanical load conforming to EN/ISO 13849-1
B10d = 20 Mcycles contactor with mechanical load conforming to EN/ISO 13849-1
max command speed
3600 cycles/h at <60°C
minimum switching voltage
17 V for signaling circuit
non-overlap time
1.5 ms on de-
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
energization between NC and NO contact 1.5 ms on excitation between NC and NO contact
coil technology
Without integrated interference suppression module
Poles description
3P
Environment
degree of pollution
3
ip degree of protection
IP20 front face conforming to IEC 60529
operating altitude
0...3000 m
product certificates
certificat CEI CE
UL
CSA
CCC
EAC
LROS (Lloyds register of shipping)
RINA
BV
DNV-GL
UL
CSA
CCC
EAC
LROS (Lloyds register of shipping)
RINA
BV
DNV-GL
ambient air temperature for operation
-40…60 °C
60…70 °C with current reduction
60…70 °C with current reduction
overvoltage category
III
standards
EN/CEI 60947-1
EN/CEI 60947-4-1
EN/CEI 60947-5-1
UL 60947-4-1
UL 60947-5-1
CSA C22.2 No 60947-4-1
CSA C22.2 No 60947 -5-1
GB/T 14048.4
EN/CEI 60947-4-1
EN/CEI 60947-5-1
UL 60947-4-1
UL 60947-5-1
CSA C22.2 No 60947-4-1
CSA C22.2 No 60947 -5-1
GB/T 14048.4
fire resistance
850 °C conforming to IEC 60695-2-1
thermal dissipation
6…10 W at 50/60 Hz
climatic resistance
conform to IACS E10 exposure to damp heat
protective treatment
TH conforming to IEC 60068-2-30
insulation resistance
> 10 MΩ for signaling circuit
KKK ja hinna lisateave
LC1D95F7 on toode kategooriast Tööstuslikud kontaktorid, mis on mõeldud ettevõtetele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.
- Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
- Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
- Kiire tarne Baltikumis ning Soomes; koostöö tunnustatud kulleritega.
- Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.
Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.
KKK tootele LC1D95F7 - Schneider Electric
-
Kas BaltElec pakub LC1D95F7 jaoks mahupõhist hinda?
Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: LC1D95F7, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
-
Milline on LC1D95F7 saadavus ja tarneaeg Baltikumis ja Soomes?
Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja laoseisust; kinnitame pakkumisega.
-
Kas LC1D95F7 firmalt Schneider Electric on autentne?
Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
-
Kas LC1D95F7 sobib minu projekti?
Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
-
Kuidas toimub kohaletoimetamine ja arveldamine?
Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt kokkuleppele; suured partiid hinnastame eraldi.
Hiljuti vaadatud
LC1D95F7 - Schneider Electric
Kontaktor, TeSys Deca, 3P(3NO), AC-3/AC-3e, 440V, 95A, 110V AC 50/60Hz mähis.
204,13 € KM-ta
253,12 € KM-ga
Laos
Teie avaldus on edukalt saadetud