Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
LC1D80004P7 - TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz. - Schneider Electric - TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz. - Schneider Electric - 0
LC1D80004P7 - TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz. - Schneider Electric - TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz. - Schneider Electric - 0
Tellimisel

LC1D80004P7 – Schneider Electric

EAN: 3389110074611
242,42 € KM-ta
300,61 € KM-ga
TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz. - Schneider Electric
 Korvis
300,61 €
SPETSIFIKATSIOONID
Default
Seeria TeSyS Deca kontaktorid
Main
product range TeSys D
Range TeSys
[uc] control circuit voltage 230 V AC 50/60Hz
job category AC-1
name of the device LC1D
switch application Resistive load (AC-1)
type of product or equipment contactor
[ui] rated insulation voltage Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Power circuit: 1000 V conforming to IEC 60947-4-1
control circuit type AC at 50/60 Hz
composition of the power pole contacts 4F
average impedance 0.8 mOhm - Ith 125 A 50 Hz for power circuit
Complementary
[ie] rated operational current 125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
[ue] rated operational voltage Power circuit: <= 300 V DC 25...400 Hz
Power circuit: <= 690 V AC
compatibility code LC1D
[ics] rated service breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947
[icw] rated short-time withstand current 640 A at <40°C - 10 s for power circuit
990 A at <40°C - 1s for power circuit
135 A at <40°C - 10 min for power circuit
320 A at <40°C - 1 min for power circuit
[ith] conventional thermal current 125 A at <60 °C) for power circuit
caliber of the fuse to be associated 200 A gG at <= 690 V type 1 coordination for power circuit
160 A gG at <= 690 V type 2 coordination for power circuit
Handle front plate colour 127 mm
tightening torque Remote control: 1.2 Nm - on screw-clamp terminals - with flat screwdriver Ø 6 mm
Remote control: 1.2 Nm - on screw-clamp terminals - with Phillips No. 2 screwdriver
Power circuit: 12 Nm - on connector - with flat screwdriver Ø 6 to Ø 8 mm
Power circuit: 12 Nm - on hexagonal connector with 4 mm screw head
Remote control: 1.2 Nm - on screw clamp terminals - with pozidriv n°2 screwdriver
[uimp] rated impulse withstand voltage 8 kV conforming to IEC 60947
average fuel consumption when going 26 VA 60 Hz cos phi 0.3 (at 20°C)
26 VA 50 Hz cos phi 0.3 (at 20°C)
product weight 1,76 kg
contact compatibility M1
electrical life 0.8 Mcycles 125 A AC-1 at Ue <= 440 V
connection mode Remote control: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible with cable end
Remote control: screw terminal blocks- clamp 1 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Remote control: screw clamp terminals 1 1…4 mm² - cable stiffness : rigid without cable end
Remote control: screw clamp terminals 2 1…4 mm² - cable stiffness: rigid without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible without cable end
Power circuit: connector 2 4… 25 mm² - cable stiffness: flexible without cable end
Power circuit: connector 1 4…50 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 2 4…16 mm² - cable stiffness: flexible with ferrule
Power circuit: connector 1 4…50 mm² - cable stiffness : rigid without cable end
Power circuit: connector 2 4…25 mm² - cable stiffness: rigid without cable end
control circuit voltage range 0.85...1.1 Uc -40...55 °C operational AC 60 Hz
0.3...0.6 Uc -40...70 °C loss of level AC 50/60 Hz
0.8...1.1 Uc -40 …55 °C operational AC 50 Hz
1...1.1 Uc 55…70 °C operational AC 50/60 Hz
mechanical endurance 4 Mcycles
width (w) 96 mm
mechanical robustness Open contactor vibrations (2 Gn, 5 to 300 Hz)
Open contactor shocks (8 Gn for 11 ms)
Closed contactor vibrations (3 Gn, 5 to 300 Hz)
Closed contactor shocks (10 Gn for 11 ms)
Flame retardance V1 conforming to UL 94
rated rms inrush power 1100 A at 440 V for power circuit conforming to IEC 60947
depth 125 mm
mounting bracket Rail
Platine
frequency Without
calling power goes 245 VA 60 Hz cos phi 0.75 (at 20°C)
245 VA 50 Hz cos phi 0.75 (at 20°C)
operating time 20…35 ms closing
6…20 ms opening
power loss per pole 12,5 W AC-1
security reliability level B10d = 1369863 contactor cycle with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 contactor cycle with mechanical load conforming to EN/ISO 13849-1
max command speed 3600 cycles/h at <60°C
coil technology Without integrated interference suppression module
Poles description 4P
Environment
degree of pollution 3
ip degree of protection IP20 front face conforming to IEC 60529
operating altitude 0...3000 m
product certificates GOST
LROS (Lloyds register of shipping)
DNV
UL
CSA
RINA
GL
CCC
BV
ambient air temperature for operation -40…60 °C
60…70 °C with current reduction
overvoltage category III
standards CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
CEI 60947-4-1
CEI 60947-5-1
UL 508
fire resistance 850 °C conforming to IEC 60695-2-1
thermal dissipation 6…10 W at 50/60 Hz
climatic resistance conform to IACS E10 exposure to damp heat
protective treatment TH conforming to IEC 60068-2-30
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

LC1D80004P7 on lahendus kategooriast Tööstuslikud kontaktorid, mis on mõeldud ettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

  • Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
  • Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele LC1D80004P7 - Schneider Electric

Hiljuti vaadatud
LC1D80004P7 - Schneider Electric - TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz.
LC1D80004P7 - Schneider Electric
TeSys LC1D - kontaktor - 4P - AC-1 440V - 125A - mähis 230Vac - 50/60Hz.
242,42 € KM-ta
300,61 € KM-ga
Tellimisel