Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
ATS48C11Y - Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW - Schneider Electric - Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW - Schneider Electric - 0
ATS48C11Y - Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW - Schneider Electric - Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW - Schneider Electric - 0
Tellimisel

ATS48C11Y – Schneider Electric

3 765,46 € KM-ta
4 669,17 € KM-ga
Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW - Schneider Electric
 Korvis
4 669,17 €
SPETSIFIKATSIOONID
Default
Seeria Altistart 48
Main
Device short name ATS48
product specific application Heavy duty industry and pumps
Ue power supply voltage 208...690 V - 15...10 %
motor power kW 22 kW at 230 V for severe applications
30 kW at 230 V for standard applications
45 kW at 400 V for severe applications
45 kW at 440 V for severe applications
55 kW at 400 V for standard applications
55 kW at 440 V for standard applications
55 kW at 500 V for severe applications
55 kW at 525 V for severe applications
75 kW at 500 V for standard applications
75 kW at 525 V for standard applications
75 kW at 660 V for severe applications
75 kW at 690 V for severe applications
90 kW at 660 V for standard applications
90 kW at 690 V for standard applications
Complementary
Product certifications GOST
TCF
CCC
SEPRO
NOM 117
C-Tick
CSA
UL
DNV
Handle front plate colour 290 mm
Product or component type Soft starter
Communication data link Serial
minimum switching current 10 mA at 6 V DC for relay outputs
marking CE
Discrete input logic Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
width (w) 190 mm
Analogue output type Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
Discrete input type PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
function available External bypass (optional)
Discrete input number 5
Net weight 8.3 kg
physical interface RS485 multidrop
Discrete output type (LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Operating position Vertical +/- 10 degree
communication port protocol Modbus
Discrete output number 2
Motor power hp 100 hp at 575 V for standard applications
25 hp at 208 V for severe applications
30 hp at 208 V for standard applications
30 hp at 230 V for severe applications
40 hp at 230 V for standard applications
60 hp at 460 V for severe applications
75 hp at 460 V for standard applications
75 hp at 575 V for severe applications
connector type 1 RJ45
depth 235 mm
device connection In the motor supply line
Product destination Asynchronous motors
Utilisation category AC-53A
Protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter
Transmission rate 4800, 9600 or 19200 bps
Power supply frequency 50...60 Hz - 5...5 %
Environment
Ambient air temp for storage/transportation -25…70 °C
operating altitude <= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m
Range of product Altistart 48
ambient air temperature for operation 40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)
electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards EN/IEC 60947-4-2
relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric ATS48C11Y on lahendus kategooriast Pehmkäivitid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

  • Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele ATS48C11Y - Schneider Electric

Hiljuti vaadatud
ATS48C11Y - Schneider Electric - Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW
ATS48C11Y - Schneider Electric
Pehme starter asünkroonmootorile, ATS48, 96 A, 208...690 V, 22...90 KW
3 765,46 € KM-ta
4 669,17 € KM-ga
Tellimisel