ATS01N232QN - Pehme starter asünkroonmootorile - ATS01 - 32 A - 380..415V - 15 KW - Schneider Electric - Pehme starter asünkroonmootorile - ATS01 - 32 A - 380..415V - 15 KW - Schneider Electric - 0

Tellimisel

ATS01N232QN – Schneider Electric

EAN: 3389110673111

261,48 € KM-ta

324,24 € KM-ga

Pehme starter asünkroonmootorile - ATS01 - 32 A - 380..415V - 15 KW - Schneider Electric

Korvis

324,24 €

SPETSIFIKATSIOONID

Default

Seeria Altistart 01

Main

available functions Built-in bypass

product range Altistart 01

product specific application Machine simple

[uc] control circuit voltage Built into the starter

job category AC-53B conforming to EN/IEC 60947-4-2

name of the device ATS01

starter caliber icl 32 A

type of product or equipment Soft starter

destination of the product Asynchronous motors

number of network phases 3 phases

motor power kW 15 kW, 3 phases at 380...415 V

start type Starting with voltage ramp

Complementary

[un] rated nominal voltage 380...415V - 10...10%

compatibility code ATS01N2

power consumption 160 A at rated load

maximum switching current Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load

starting torque 30 to 80% of motor starting torque directly connected to the power supply

Handle front plate colour 154 mm

tightening torque 0,5 N.m
1,9…2,5 N.m

minimum switching current 10 mA at 6 V DC for relay outputs

product weight 0,56 kg

logic output current 2 A DC-13
3 A AC-15

marking THIS

voltage logic input 24...40V

output voltage <= supply voltage

width (w) 45 mm

network frequency 47,5…63 Hz

power frequency 50...60 Hz - 5...5 %

supply voltage limits 342…456V

depth 131 mm

motor power range ac - 3 15…25 kW at 380…440 V 3 phases

power dissipation in w 4.5 W at full load and at the end of the start-up
324.5 W in transient phase

logic input Positive LI1, LI2, QUICK CHARGE at state 0: < 5 V and <= 0.2 mA at state 1: > 13 V, >= 0.5 mA

electrical connection Flange terminal with 4 mm screw - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 remote control
Flange terminal with 4 mm screw - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 remote control
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 remote control
Flange terminal with screw 4 mm - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 remote control
Flange terminal with 4 mm screw - flexible with cable end 2 1...6 mm² AWG 10 power circuit
Flange terminal with 4 mm screw - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 remote control
Flange terminal with 4 mm screw - flexible with cable end 1 1...6 mm² AWG 10 power circuit

deceleration time symbol Adjustable from 1 to 10 sec.

mounting position Vertical +/- 10 degrees

boot time Adjustable from 1 to 10 s
1 s / 50
10 s / 5
5 s / 10

logic output voltage 24 V (voltage limits: 6...30 V) open collector logic

type of display 1 LED (green) for starter under voltage
1 LED (yellow) for nominal voltage reached

motor starter type Soft starter

construction options With heat sink

logic input type Logic (LI1, LI2, QUICK CHARGE) stop, run and quick charge on start functions <= 8 mA 27 kOhm

logic output type Open collector logic LO1 end of start signal
Relay outputs R1A, R1C "NO"

Environment

degree of pollution 2 conforming to EN/IEC 60947-4-2

ip degree of protection IP20

operating altitude <= 1000 m without derating
> 1000 m with load reduction of 2.2% per additional 100 m

product certificates C-Tick
CSA
CCC
GOST
UL
B44.1-96/ASME A17.5 for starter connected to motor delta terminal

electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 6100-4-11
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immun ctr transmitted interference p/ driven p/ chps radioelectric level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity against radiated radio-electric interference level 3 conforming to IEC 61000-4-3
Micro-breaks and voltage fluctuation conforming to IEC 61000-4-11
Impulse voltage/current level 3 conforming to IEC 61000-4-5

standards EN/CEI 60947-4-2

relative humidity 5...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

operating ambient air temperature -10…40°C (without derating)
40…50°C (with current reduction of 2% per °C)

room temperature for storage -25...70 °C conforming to EN/IEC 60947-4-2

mechanical shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27

vibration resistance 1 gn (f= 13...150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak-to-peak (f= 3...13 Hz) conforming to EN/IEC 60068-2-6

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

Schneider Electric ATS01N232QN on lahendus kategooriast Pehmkäivitid, mis on mõeldud professionaalidele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Autentne Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele ATS01N232QN - Schneider Electric

Kas teie pakute ATS01N232QN jaoks hulgihinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: ATS01N232QN, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on ATS01N232QN saadavus ja tarne Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja partii saadavusest; kinnitame pakkumisega.
Kas ATS01N232QN firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas ATS01N232QN sobib minu rakendusse?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

ATS01N232QN - Schneider Electric

Pehme starter asünkroonmootorile - ATS01 - 32 A - 380..415V - 15 KW

261,48 € KM-ta

324,24 € KM-ga

Tellimisel

Korvis