GC2540M5 - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 4NO, 220-240VAC 50Hz mähis. - Schneider Electric - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 4NO, 220-240VAC 50Hz mähis. - Schneider Electric - 0

Tellimisel

GC2540M5 – Schneider Electric

EAN: 3389110641523

34,33 € KM-ta

42,57 € KM-ga

Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 4NO, 220-240VAC 50Hz mähis. - Schneider Electric

Korvis

42,57 €

SPETSIFIKATSIOONID

Default

Seeria TeSys GB2

Main

Range TeSys

[uc] control circuit voltage 220...240V AC 50Hz

job category AC-7B
AC-7A

name of the device GC25

switch application Lighting
Motor control (AC-3)
Heat

type of product or equipment Modular contactor

Product Name TeSys GC

[ui] rated insulation voltage 500 V conforming to IEC 61095
500 V conforming to VDE 0110

control circuit type AC at 50 Hz

composition of the power pole contacts 4F

average impedance 2.5 mOhm - Ith 25 A 50 Hz for power circuit

Complementary

[ie] rated operational current 25 A AC-7A
8.5 A AC-7B

[ue] rated operational voltage <= 250 VCA

[ics] rated service breaking capacity 68 A at 400 V for power circuit conforming to IEC 61095

[icw] rated short-time withstand current 200 A at <40°C - 10 s for power circuit
62 A at <40°C - 30 s for power circuit

[ith] conventional thermal current 25 A at <50 °C) for power circuit

caliber of the fuse to be associated 25 A gL at <= 440 V for power circuit

batch quantity Set of 6

Handle front plate colour 85 mm

tightening torque Remote control: 0.8 Nm - on screw clamp terminals
Power circuit: 0.8 Nm - on screw clamp terminals

[uimp] rated impulse withstand voltage 4 kV

average fuel consumption when going 4.6VA 50Hz (at 20°C)

product weight 0,23 kg

mode d'installation snap-on

electrical life AC-7A: 100,000 cycle
AC-7B: 100,000 cycle

connection mode Remote control: screw clamp terminals 1 cable(s) 2.5 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 2.5 mm² flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 2.5 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1.5 mm²rigid without cable end
Remote control: screw clamp terminals 2 cable(s) 1.5 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm² flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1.5 mm² flexible with cable end
Power circuit: screw terminal blocks clamp 1 cable(s) 6 mm² rigid without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm² rigid without cable end

control circuit voltage range Level loss: 0.2...0.75 Uc at 50 Hz (at <50 °C)
Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C)

mechanical endurance 1000000 cycle

width (w) 36 mm

mechanical robustness Shocks contactor open: 10 Gn for 11 ms
Shocks contactor closed: 15 Gn for 11 ms
Vibrations contactor open: 2 Gn, 5 to 300 Hz
Vibrations contactor closed: 3 Gn, 5 to 300 Hz

Colour Blanc

total number of 18mm modules 2

rated rms inrush power 68 A at 400 V AC for power circuit conforming to IEC 61095

depth 62,5 mm

mounting bracket DIN rail

calling power goes 34VA 50Hz (at 20°C)

operating time 10…25 ms opening
10…30 ms closing

mounting position 30°/vertical

power loss per pole 1.6W

max command speed 300 cycles/h at <50°C

order type Remote control

Poles description 4P

Environment

ip degree of protection IP40 conforming to VDE 0106 (in enclosure)
IP20 conforming to VDE 0106

operating altitude <= 3000 m

standards CEI 61095
CEI 60947-5

thermal dissipation 1.6W at 50/60Hz

operating ambient air temperature -5…50 °C

storage room temperature -40…70 °C

protective treatment TC

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

GC2540M5 on toode kategooriast Mootorikaitselülitid, mis on mõeldud professionaalidele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hinnainfo: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele GC2540M5 - Schneider Electric

Kas BaltElec pakub GC2540M5 jaoks hulgihinda?

Jah, projektihinnad on saadaval. Saada meile loend soovitud kogustega (näiteks: GC2540M5, Schneider Electric, 10tk), et koostaksime personaalse pakkumise.
Milline on GC2540M5 saadavus ja tarne Baltikumis ja Soomes?

Pakume kiiret tarnekäivet Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja partii saadavusest; kinnitame pakkumisega.
Kas GC2540M5 firmalt Schneider Electric on autentne?

Jah. Müüme ainult Schneider Electric autentseid tooteid, millel on tehase garantii. Vajadusel edastame vastavussertifikaadid.
Kas GC2540M5 sobib minu projekti?

Aitame sobivuse tõhusalt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub kohaletoimetamine ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; suured partiid hinnastame eraldi.

Hiljuti vaadatud

GC2540M5 - Schneider Electric

Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 4NO, 220-240VAC 50Hz mähis.

34,33 € KM-ta

42,57 € KM-ga

Tellimisel

Korvis