Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
METSEPM5331 - võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID - Schneider Electric - võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID - Schneider Electric - 0
METSEPM5331 - võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID - Schneider Electric - võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID - Schneider Electric - 0
Tellimisel

METSEPM5331 – Schneider Electric

401,43 € KM-ta
497,77 € KM-ga
võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID - Schneider Electric
 Korvis
497,77 €
SPETSIFIKATSIOONID
Default
Seeria PowerLogic PM5000
Main
Device short name PM5331
Measurement current 5…8500 mA
Range PowerLogic
Product Name PowerLogic PM5000
Measurement voltage 35…760 V AC 45...65 Hz between phases
20…400 V AC 45...65 Hz between phase and neutral
Complementary
power quality analysis up to the 31st harmonic
[in] rated current 1 A
5 A
maximum power consumption in va 11 VA at 415 V
memory capacity 256 kB
Product certifications CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
MID conforming to EN 50470-1
MID conforming to EN 50470-3
Communication port support RS485
Handle front plate colour 96 mm
Product or component type Power meter
accuracy class Class 0.5S active energy conforming to IEC 62053-22
Connections - terminals Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
Input/output circuit: screw terminal block6
Relay output: screw terminal block4
Ethernet network: RJ45 connector
Device application Power monitoring
Multi-tariff
type of measurement Current
Voltage
Frequency
Power factor
Energy
Active and reactive power
Analogue input type Voltage (impedance 5 MOhm)
Current (impedance <= 0.3 mOhm)
Data recording Alarm logs
Min/max of instantaneous values
Data logs
Time stamping
Maintenance logs
Event logs
information displayed Tariff (4)
width (w) 96 mm
network frequency 50 Hz
60 Hz
number of outputs 2 relay
2 digital
Mounting mode Flush-mounted
Net weight 430 g
frequency measurement range 45…65 Hz
measurement accuracy Active energy +/- 0.5 %
Reactive energy +/- 2 %
Active power +/- 0.5 %
Apparent power +/- 0.5 %
Frequency +/- 0.05 %
Power factor +/- 0.5
Current +/- 0.5 %
Voltage +/- 0.5 %
Apparent energy +/- 0.5 %
Reactive power +/- 2 %
communication port protocol Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none - 2 wires, insulation 2500 V
JBUS
Display type Monochrome graphic LCD
Mounting support Framework
depth 72 mm
Network type 1P + N
3P
3P + N
Number of inputs 2 digital
Pollution degree 2
sampling rate 64 samples/cycle
display resolution 128 x 128 pixels
supply voltage 90...450 V AC 45...65 Hz
100...300 V DC
Ride-through time 80 ms 120 V AC typical
100 ms 230 V AC typical
100 ms 415 V AC typical
50 ms 125 V DC typical
Environment
Ambient air temp for storage/transportation -40…85 °C
ip degree of protection IP54 display: conforming to IEC 60529
IP30 rear: conforming to IEC 60529
operating altitude 2000 m CAT III
3000 m CAT II
ambient air temperature for operation -25…70 °C meter
-20…70 °C display
-25…-20 °C (with reduced performance) display
electromagnetic compatibility Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Surge immunity test level 4 conforming to IEC 61000-4-5
Voltage dips and interruptions immunity test level 3 conforming to IEC 61000-4-11
Limits for harmonic current emissions class A conforming to IEC 61000-3-2
Conducted RF disturbances level 3 conforming to IEC 61000-4-6
Magnetic field at power frequency level 4 conforming to IEC 61000-4-8
Conducted and radiated emissions class B conforming to EN 55022
Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3
Electrostatic discharge - test level: 8 kV level 4 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
standards EN 50470-3
IEC 62053-22
IEC 61557-12
UL 61010-1
IEC 62053-24
EN 50470-1
IEC 60529
relative humidity 5…95 % at 50 °C non-condensing
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

METSEPM5331 on toode kategooriast Põhienergia mõõtmine, mis on mõeldud suurettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

  • Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Tõhus ja kiire logistika Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hinnainfo: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele METSEPM5331 - Schneider Electric

Hiljuti vaadatud
METSEPM5331 - Schneider Electric - võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID
METSEPM5331 - Schneider Electric
võimsusmõõtja PowerLogic PM5331, modbus, kuni 31. harmooniline, 256KB 2DI/2DO 35 häireid, MID
401,43 € KM-ta
497,77 € KM-ga
Tellimisel