Default
Seeria
Harmony XAC
Main
drop box application
Single speed hoist motor control
product range
Harmony XAC
[ithe] thermal current under enclosure
10 A
extensibility type
Complete, ready to use
name of the device
XACA
type of product or equipment
Command post during
[ui] rated insulation voltage
Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1
600 V (pollution degree 3)
type of electrical circuit
Remote
Complementary
product compatibility
ZB2BE101 for all
XENT1192 instructions for emergency stop
[uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-1
case material
Polypropylene
cable entry
Rubber sleeve with stepped entry 8…26 mm
product weight
0,615 kg
description of iso n°1 terminals
(13-14)NO
command station composition
2 push buttons + 1 emergency stop button
color control station
Yellow
connection mode
Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end
Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end
contact operation
Slow-action
mechanical endurance
1000000 cycle
rated operational power in w
40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
48 W DC-13 for 1000000 cycle, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
65 W DC-13 for 1000000 cycles, operating rate <60 cyc/min at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
actuation force
10 N push button
14 N emergency stop
description of iso n°2 terminals
(21-22)NC
(31-32)NC
(11-12)NC
contact code designation
A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A
A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947 -5-1 appendix A
identification connectors
(11-12)NC
(13-14)NO
mechanical lock
With mechanical interlock
control button type
First upper 1 NO
push-button, slow Second lower 1 NO push-button, slow
Stop push-button Ø 30 mm 3 O latching
maximum resistance between terminals
25 MΩ
short circuit protection
10 A protection fuse by fuse cartridge type gG
type of control station
Double isolation
Environment
ip degree of protection
IP65 conforming to IEC 60529
product certificates
CCC
GOST
overvoltage category
Class II conforming to IEC 61140
standards
CSA C22.2 No 14
EN/CEI 60204-32
EN/CEI 60947-5-1
UL 508
shock resistance ik
IK08 conforming to EN 50102
operating ambient air temperature
-25…70 °C
storage room temperature
-40…70 °C
mechanical shock resistance
100 gn conforming to IEC 60068-2-27
vibration resistance
15 gn (f= 10...500 Hz) conforming to IEC 60068-2-6
protective treatment
TH