Kõik kategooriad
Võrdle Ostukorv
+372 5326 4976
ET
ET EN
GC2520M5 - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis - Schneider Electric - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis - Schneider Electric - 0
GC2520M5 - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis - Schneider Electric - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis - Schneider Electric - 0
Tellimisel

GC2520M5 – Schneider Electric

EAN: 3389110641455
35,71 € KM-ta
44,28 € KM-ga
Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis - Schneider Electric
 Korvis
44,28 €
SPETSIFIKATSIOONID
Default
Seeria TeSys GB2
Main
Range TeSys
[uc] control circuit voltage 220...240V AC 50Hz
job category AC-7B
AC-7A
name of the device GC25
switch application Motor control (AC-3)
Heat
Lighting
type of product or equipment Modular contactor
Product Name TeSys GC
[ui] rated insulation voltage 500 V conforming to IEC 61095
500 V conforming to VDE 0110
control circuit type AC at 50 Hz
composition of the power pole contacts 2f
average impedance 2.5 mOhm - Ith 25 A 50 Hz for power circuit
Complementary
[ie] rated operational current 25 A AC-7A
8.5 A AC-7B
[ue] rated operational voltage <= 250 VCA
[ics] rated service breaking capacity 68 A at 400 V for power circuit conforming to IEC 61095
[icw] rated short-time withstand current 200 A at <40°C - 10 s for power circuit
62 A at <40°C - 30 s for power circuit
[ith] conventional thermal current 25 A at <50 °C) for power circuit
caliber of the fuse to be associated 25 A gL at <= 440 V for power circuit
batch quantity Pack of 12
Handle front plate colour 81 mm
tightening torque Remote control: 0.8 Nm - on screw clamp terminals
Power circuit: 0.8 Nm - on screw clamp terminals
[uimp] rated impulse withstand voltage 4 kV
average fuel consumption when going 3.8VA 50Hz (at 20°C)
product weight 0,11 kg
mode d'installation snap-on
electrical life AC-7A: 100,000 cycle
AC-7B: 100,000 cycle
connection mode Remote control: screw clamp terminals 1 cable(s) 2.5 mm² flexible without cable end
Remote control: screw clamp terminals 2 cable(s) 2.5 mm² flexible without cable end
Remote control: screw clamp terminals 1 cable( s) 2.5 mm²flexible with cable end
Remote control: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Remote control: screw clamp terminals 1 cable(s) 1.5 mm²rigid without cable end
Remote control: screw clamp terminals 2 cable(s) 1.5 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm² flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1.5 mm² flexible with cable end
Power circuit: screw terminal blocks clamp 1 cable(s) 6 mm² rigid without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm² rigid without cable end
control circuit voltage range Level loss: 0.2...0.75 Uc at 50 Hz (at <50 °C)
Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C)
mechanical endurance 1000000 cycle
width (w) 17,5 mm
mechanical robustness Shocks contactor open: 10 Gn for 11 ms
Shocks contactor closed: 15 Gn for 11 ms
Vibrations contactor open: 2 Gn, 5 to 300 Hz
Vibrations contactor closed: 3 Gn, 5 to 300 Hz
Colour Blanc
total number of 18mm modules 1
rated rms inrush power 68 A at 400 V AC for power circuit conforming to IEC 61095
depth 62,5 mm
mounting bracket DIN rail
calling power goes 15VA 50Hz (at 20°C)
operating time 10…25 ms opening
10…30 ms closing
mounting position 30°/vertical
power loss per pole 1.6W
max command speed 300 cycles/h at <50°C
order type Remote control
Poles description 2P
Environment
ip degree of protection IP40 conforming to VDE 0106 (in enclosure)
IP20 conforming to VDE 0106
operating altitude <= 3000 m
operating ambient temperature -5…50 °C
standards CEI 61095
CEI 60947-5
thermal dissipation 1.3W at 50/60Hz
storage room temperature -40…70 °C
protective treatment TC
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

GC2520M5 on toode kategooriast Mootorikaitselülitid, mis on mõeldud ettevõtetele. BaltElec tegeleb mahupõhise müügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

  • Autentne Schneider Electric toode, vastavusdokumendid päringu alusel.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja nõustamine valikul vastavalt Sinu rakendusele.

Hind: Küsi eripakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele GC2520M5 - Schneider Electric

Hiljuti vaadatud
GC2520M5 - Schneider Electric - Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis
GC2520M5 - Schneider Electric
Modulaarne kontaktor, TeSys GC, AC-7a, 25A, 2NO, 220-240VAC 50Hz mähis
35,71 € KM-ta
44,28 € KM-ga
Tellimisel