ATV630D11N4 - Reguleeritav ajam, Altivar Process ATV600, ATV630, 11kW/15 hj, 380...480 V, IP21/UL tüüp 1 - Schneider Electric - Reguleeritav ajam, Altivar Process ATV600, ATV630, 11kW/15 hj, 380...480 V, IP21/UL tüüp 1 - Schneider Electric - 0

Tellimisel

ATV630D11N4 – Schneider Electric

EAN: 3606480758164

1 112,64 € KM-ta

1 379,68 € KM-ga

Reguleeritav ajam, Altivar Process ATV600, ATV630, 11kW/15 hj, 380...480 V, IP21/UL tüüp 1 - Schneider Electric

Korvis

1 379,68 €

SPETSIFIKATSIOONID

Default

Seeria Altivar 630

Main

allowable temporary current amplification 1.1 x In for 60 s (low overload)
1.5 x In for 60 s (high overload)

product range Altivar Process ATV600

product specific application Processes and utilities

name of the device ATV630

option board Position A: module de communication, Profibus DP V1
Position A: module de communication, Profinet
Position A: module de communication, DeviceNet
Position A: module de communication, Modbus TCP/EtherNet/IP
Position A: module de communication, CANopen daisy chain RJ45
Position A: module de communication, CANopen SUB-D 9
Position A: module de communication, CANopen bornes à vis
Position A/position B: module d'extension E/S digital et analogique
Position A/position B: module d'extension relais
Position A: module de communication, Ethernet IP/Modbus TCP/MD-Link
Module de communication, BACnet MS/TP
Module de communication, Ethernet Powerlink

type of product or equipment Speed variator

destination of the product Asynchronous
motors Synchronous motors

emc filter Integrated with 50 m max motor cable conforming to EN/IEC 61800-3 category C2
Integrated with 150 m max motor cable conforming to EN/IEC 61800-3 category C3

degree of protection UL type 1 conforming to UL 508C

number of network phases 3 phases

communication protocol Modbus TCP
Ethernet
Modbus série

engine power hp 15 hp light overload
10 hp heavy overload

motor power kW 11 kW (low overload)
7.5 kW (high overload)

security function STO (safe torque off) SIL 3

variant Version standard

Complementary

feed External supply for digital inputs: 24 V DC (19...30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1...10 kOhm): 10, 5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
External power supply for digital and STO inputs: 24 V DC (21…27 V), <200 mA, protection type : overload and short-circuit protection

[un] rated nominal voltage 380…480 V - 15...10%

digital input compatibility DI1…DI6: level 1 PLC digital input conforming to EN/IEC 61131-2
DI5, DI6: level 1 PLC digital input conforming to IEC 65A-68
STOA, STOB: level 1 PLC digital input conforming to EN/IEC 61131 -2

maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC

batch quantity 1

data formats 8 bits, configurable even, odd or no parity

Handle front plate colour 409 mm

installation of the box Mural

minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC

product weight 7,7 kg

marking THIS

mode d'installation Wall mounting

refresh time Relay output (R1, R2, R3): 5ms (+/- 0.5ms)

output voltage <= supply voltage

width (w) 171 mm

power frequency 50...60 Hz - 5...5 %

switching frequency 2...12 kHz adjustable
4...12 kHz with reduction factor

Local signalling for local diagnostics 3 LEDs
for on-board communication status 3 LEDs (double colour)
for communication module status 4 LEDs (double colour)
for voltage presence 1 LED (red)

motor slip compensation Adjustable
Can be suppressed
Not available in law for permanent magnet motor
Automatic whatever the load

physical interface Ethernet
2-fils RS 485

prospective line short-circuit current 50 kA

connector type RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
RJ45 (on the remote graphic terminal) for Modbus serial

depth 233 mm

line current 19.8 A at 380 V (light overload)
17 A at 480 V (light overload)
14.1 A at 380 V (heavy overload)
12.5 A at 480 V (heavy overload)

motor power range ac - 3 7…11 kW at 380…440 V 3 phases
7…11 kW at 480…500 V 3 phases

power dissipation in w Natural convection: 51 W at 380 V, switching frequency 4 kHz
Forced convection: 255 W at 380 V, switching frequency 4 kHz

continuous output current 23.5 A at 4 kHz for light overload
16.5 A at 4 kHz for heavy overload

current maximum input current per phase 19,8 A

isolation Between power and control connections

tension de service (us) 380…480V

logic input 16 programmed speeds

maximum transient current 25.9 A for 60 s (light overload)
24.8 A for 60 s (high overload)

electrical connection Control: removable screw terminals 0.5…1.5 mm²/4 x 1.5 mm² + 2 x 1 mm² + 2 x 0.14 mm²
Motor: screw terminal block 6…10 mm²/AWG 10…AWG 8
Input: screw terminal block 6 mm²/AWG 10

mode of exchange Half duplex, full duplex, auto-négociation Ethernet/Modbus TCP

sampling time 2 ms +/- 0.5 ms (DI1…DI4) - digital input
5 ms +/- 1 ms (DI5, DI6) - digital input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - input analog
10 ms +/- 1 ms (AO1) - analog output

standstill braking 4 x 2,5 mm² + 2 x 1 mm² + 2 x 0,14 mm²

linearity error AI1, AI2, AI3: +/- 0.15% of maximum value for analog input
AO1, AO2: +/-0.2% for analog output

mounting position Vertical +/- 10 degrees

nominal switching frequency 4 kHz

maximum output frequency 500 kHz

kind of protection Thermal protection: motor
Safe torque off: motor Motor
phase loss: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and ground: drive
Output overvoltage: drive
Short-circuit protection : drive
Motor phase loss: drive
DC bus overvoltage: drive
Power supply overvoltage: drive Power supply
undervoltage: drive Power supply
phase loss: drive
Overspeed: drive
Break on the control circuit: dimmer

access method Esclave Modbus TCP

variable speed drive output frequency 0,1…500 Hz

number of analog inputs 3

number of logic inputs 8

kind of cooling Forced convection

number of analog outputs 2

precision +/- 0.6% AI1, AI2, AI3 for a temperature variation of 60°C analog input
+/- 1% AO1, AO2 for a temperature variation of 60°C analog output

baud rate 10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

synchronous motor control profile Permanent magnet
motor Synchronous reluctance motor

control profile for asynchronous motor Constant
torque Optimized
torque Variable torque

apparent power 14.1 kVA à 480 V (surcharge faible)
10.4 kVA à 480 V (surcharge importante)

number of addresses 1…247 for Modbus serial

variable speed drive application selection Centrifugal Compressor Building - HVAC
Other Application Food & Beverage Processing
Fan Mineral & Metal
Mining Pump Mineral & Metal Mining
Fan Oil & Gas
Other Application Water & Wastewater
Screw Compressor Building - HVAC
Pump Food Processing & Beverage
Fan Food and Beverage
Processing Spraying Food and Beverage Processing
Electric Submersible
Pump Oil and Gas Water Injection Pump Oil and Gas
Jet Fuel Pump Oil and Gas
Compressor for Refinery Oil and Gas
Centrifugal pump Water and waste water
Volumetric pump Water and waste water
Submersible electric
pump Water and waste water Screw pump Water and waste water Lobe
compressor Water and waste water
Screw compressor Water and waste water
Centrifugal compressor Water and waste water
Fan Water and waste water
Conveyor Water and waste water
Mixer Water and waste water

acceleration and deceleration ramps Linearly adjustable from 0.01 ... 9999 s

number of relay outputs 3

analog input type AI1, AI2, AI3 voltage configurable by software: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
AI1, AI2, AI3 current configurable by software: 0...20 mA, impedance: 250 Ohm, 12 bit resolution
AI2 analog voltage input: - 10...10 V DC, impedance: 31.5 kOhm, 12 bit resolution

logic input type DI7, DI8 programmable as pulse train input: 0…30 kHz, 24 V DC (<= 30 V)

analog output type Voltage configurable by software AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Current configurable by software AQ1, AQ2: 0...20 mA, resolution 10 bits
Current configurable by software DQ-, DQ+: 30 V DC
Software configurable current DQ-, DQ+: 100 mA

logic output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA

relay output type Configurable relay R1: C/O fault relay electrical durability 100000 cycles
Configurable relay R2: sequence relay "C" electrical durability 100000 cycles
Configurable relay R3: sequence relay "C" electrical durability 100000 cycles

frequency resolution Display unit: 0.1 Hz
Analog input: 0.012/50 Hz

transmission frame RTU

polarization type No impedance

Environment

degree of pollution 2

ip degree of protection IP21 conforming to IEC 61800-5-1
IP21 conforming to IEC 60529

operating altitude <= 1000 m without derating
1000…4800 m with current reduction of 1% every 100 m

product certificates ATEX INERIS
CSA
UL
ATEX zone 2/22
DNV-GL
TÜV

electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 6100-4-11 Radiated
radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

overvoltage category III

standards UL 508C
EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849 -1

control loop Adjustable PID controller

relative humidity 5...95 % non-condensing conforming to IEC 60068-2-3

operating ambient air temperature -15…50 °C (without derating)
50…60 °C (with reduction factor)

storage room temperature -40…70 °C

mechanical shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27

sound pressure 56 dB

vibration resistance 1.5 mm peak-to-peak (f= 2...13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6

air flow 103 m3/h

sound intensity 56 dB conforming to 86/188/EEC

insulation resistance > 1 MOhm 500 VDC for 1 minute to ground

thdi maximal <48 % for 80...100% load conforming to IEC 61000-3-12

KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

ATV630D11N4 Schneider Electric on toode kategooriast Muutuva kiirusega ajamid, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja toodete levitamisega Eestis, Lätis, Leedus ja Soomes.

Originaal Schneider Electric toode, sertifikaadid ja vastavusdokumendid saadaval.
Projektihind – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele ATV630D11N4 - Schneider Electric

Kas teie pakute ATV630D11N4 jaoks mahupõhist hinda?

Jah, mahupõhine hinnastus on saadaval. Saada meile loend soovitud kogustega (näiteks: Schneider Electric, ATV630D11N4, 5tk), et koostaksime projekti pakkumise.
Milline on ATV630D11N4 saadavus ja tarneaeg Baltikumis ja Soomes?

Pakume jõudlust Eesti, Läti, Leedu ja Soome suunal. Täpne tarneaeg sõltub konfiguratsioonist ja partii saadavusest; kinnitame pakkumisega.
Kas ATV630D11N4 firmalt Schneider Electric on originaaltoode?

Jah. Müüme ainult Schneider Electric originaaltooteid, millel on tootjagarantii. Vajadusel edastame vastavussertifikaadid.
Kas ATV630D11N4 sobib minu projekti?

Aitame sobivuse kiirelt kinnitada. Edasta palun vajalikud tingimused (pinge, vool, keskkond, standardid) ja võrdleme Schneider Electric tehniliste nõuetega.
Kuidas toimub tarne ja arveldamine?

Toimetame kulleriga Eesti, Läti, Leedu ja Soome. Arveldamine vastavalt pakkumisele; projektid ja suuremad kogused hinnastame eraldi.

Hiljuti vaadatud

ATV630D11N4 - Schneider Electric

Reguleeritav ajam, Altivar Process ATV600, ATV630, 11kW/15 hj, 380...480 V, IP21/UL tüüp 1

1 112,64 € KM-ta

1 379,68 € KM-ga

Tellimisel

Korvis