Main
product range
Acti 9
device connectivity
Digital input and output
Pulse output counter
maximum supply current
1,5 A
name of the device
Smartlink Modbus
type of product or equipment
Module de communication intelligent
Product Name
Acti 9 Smartlink
channel group
1 group of 11 digital channels
max number of connected devices
Up to 11 wireless devices
Web server
BMS controller compatible
reset
Factory reset on front panel
service communication
Modbus slave for RS485
services web
Page web
input/output type
2 inputs + 1noutput per digital channel
type d'application
Load control
Circuit breaker status monitoring
Basic energy measurement E
Complementary
9 mm pitches
0 useful
[un] rated nominal voltage
24 V CC +/- 20 %
compatibility code
Acti 9 Smartlink
connection location
Front face
range compatibility
Acti 9 iTL auxiliary
Linergy (Linergy FM)
Acti 9 iOF+SD 24
Acti 9 iACT24
Acti 9 iATL24
Powerlogic counter of outputs and impulses
Acti 9 RCA iC60
Acti 9 (Acti 9 iCT) auxiliary
Acti 9 (Acti9 iC60)
Acti 9 (Acti 9 iID)
Acti 9 (Acti 9 iSW-NA)
Acti 9 (Acti9 iDPN Vigi)
Acti 9 (Acti 9 C40)
Multi 9 (Multi 9 C60)
Acti 9 (Acti 9 DT40)
Acti 9 (Acti 9 DT60)
Acti 9 (Acti 9 I-NA)
Acti 9 (Acti 9 ITG40)
Acti 9 (Acti 9 iDPN)
Acti 9 (Acti 9 Reflex iC60) Ti24 connector
terminal clamping capacity
2 x 0.25 mm² for shielded twisted pair cable, flexible with ferrule for communication bus
2 x 0.25 mm² for shielded twisted pair cable, flexible without ferrule for communication bus
2 x 0.25 mm² for shielded cable with twisted pair, rigid with cable end for communication bus
2 x 0.25 mm² for shielded twisted pair cable, rigid without cable end for communication bus
1 x 0.5 to 1 x 1.5 mm², flexible with cable end for control
1 x 0.5 to 1 x 1.5 mm², flexible without cable end for control
1 x 0.5 to 1 x 1.5 mm², rigid with cable end for control
1 x 0.5 to 1 x 1.5 mm², rigid without cable end for control
2 x 0.2...2 x 1.5 mm², flexible with cable end for power supply circuit
2 x 0.2 to 2 x 1.5 mm², flexible without cable end for power supply circuit
2 x 0.2 to 2 x 1.5 mm², rigid with cable end for power supply circuit
2 x 0.2 to 2 x 1.5 mm² , rigid without end piece for supply circuit
Handle front plate colour
22,5 mm
application specific I/O
Pulse totalizer counter Pulse
totalizer counter
inrush current
0.5 A for logic output
3 A for power supply
market segment
Residential
Retail
maximum voltage drop
<1 V at state 1 logic output
product weight
195 g
commissioning interface
ECOREACH
Page Web
connection mode
TI24 terminal spring terminals qty: 11 for logic input/output, ordered separately
Plug-in connector qty: 1 for power supply circuit
Plug-in connector qty: 1 for communication bus
courant permanent maximum
5 mA for logic input
width (w)
359 mm
Colour
White (RAL 9003)
Local signalling
Communication: 1 LED (yellow)
Status: 1 LED (green, orange and red)
wire stripping length
10 mmcontrol:
7 mmsupply circuit: 7 mmcommunication
bus:
type of communication network
RS485 Modbus RTU slave SUB-D 9 9.6 to 19.2 kbaud
depth
42 mm
type of setting
Modbus address 01…99 for
Raz address encoders for Raz address encoders
to connect, disconnect the auxiliary power supply
equipment provided
Set of 1 bus connector
Set of 1 power supply connector
Set of 2 locking clips
mounting position
Horizontal and vertical on DIN rail
electronic filter time
2 ms from phase 0 to phase 1
type of entry
Current sink for logic input, 24 V DC +/- 20% at 2.5 mA
kind of protection
Protection against short-circuits for analog input
Against reverse polarity for auxiliary power supply
Against reverse polarity for input
Overvoltage at 33 V DC for logic output
type of output
Current source: 24 V - DC - 100 mA
Environment
degree of pollution
3
environment characteristic
Corrosive 3C2 conforming to IEC 60721-3-3
Salt mist 2 conforming to IEC 60068-2-52
ip degree of protection
IP20
operating altitude
0...2000 m
electromagnetic compatibility
Resistance to electrostatic discharge (8 kV) (IEC 6100-4-11)
Resistance to electrostatic discharge (4 kV) (IEC 6100-4-11)
Resistance to electromagnetic fields (10 V/m) (IEC 61000-4-3)
Resistance to fast transients (2 kV) (IEC 61000-4-4)
Resistance to fast transients (1 kV) (IEC 61000-4-4)
Resistance to fast transients (1 kV) (IEC 61000-4-4)
EMC tests (10 V) (IEC 61000-4-6)
Immunity to magnetic fields at mains frequency (30 A/m) (IEC 61000-4-8)
immunity to micro-breaks
10 ms
fire resistance
Other parts:650°C (30 s) conforming to IEC 60695-2-10
On connection terminals:960°C (30 s) conforming to IEC 60695-2-10
relative humidity
93% at 40°C
operating temperature
-25…60 °C
storage room temperature
-40…80 °C
mechanical shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
vibration resistance
1 gn, amplitude = 3.5 mm (f = 5...300 Hz)10 cycles conforming to EN/IEC 60068-2-6
tropicalization
2