Kõik kategooriad
Võrdle Ostukorv
56193 - Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav. - Schneider Electric - Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav. - Schneider Electric - 0
56193 - Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav. - Schneider Electric - Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav. - Schneider Electric - 0
Tellimisel

56193 – Schneider Electric

EAN: 3303430561934
160,89 € KM-ta
199,50 € KM-ga
Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav. - Schneider Electric
199,50 €
SPETSIFIKATSIOONID
Default
Seeria VIGIREX
Main
[ithe] thermal current under enclosure 8 A
Range VigiPacT
compatible current sensors VigiPacT TOA differential current
sensor VigiPacT A differential current sensor
VigiPacT L differential current sensor
name of the device RH99M
type of product or equipment Monitoring relays
charge minimum 10mA at 12V
threshold setting 0.03 to 30 A alarm
ground connection diagram TT
TN-S
use of the relay Monitoring relays
sensitivity to earth leakage 0.03…30 A
distributed monitoring system 1000 V - AC at 50/60 Hz (maximum)
1000 V - AC at 400 Hz (maximum)
earth leakage delay Instantaneous for 0.03 A
Adjustable 9 positions 0…4.5 s for 0.03…30 A
differential sensitivity adjustment type Adjustable 9 positions
Complementary
9 mm pitches 6
[un] rated nominal voltage 220…240 V AC 50/60 Hz 55 to 110 %
Handle front plate colour 81 mm
tightening torque 0.6 Nm high auxiliary power supply:
0.6 Nm low error:
0.25 Nm low relay test and fault reset:
0.25 Nm high detector:
0.6 Nm low voltage presence:
[uimp] rated impulse withstand voltage 8 kV
product weight 0,3 kg
power consumed in va 4 VA
type of measurement Internal earth fault current measurement, range: 80 to 100%
connection mode Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12
Auxiliary power supply: terminal block cable(s) 0.2...2.5 mm² rigid AWG 24...AWG 12
Auxiliary power supply: terminal block cable(s) 0.25...2.5 mm² flexible with cable end AWG 24...AWG 12
Error: screw terminal cable(s) 0.2...2.5 mm² flexible AWG 24...AWG 12
Error: screw terminal cable (s) 0.2...4 mm² rigid AWG 24...AWG 12
Error: screw terminal cable(s) 0.25...2.5 mm² flexible with cable end AWG 24...AWG 12
Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16
Relay test and fault reset: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26. ..AWG 16
Relay test and fault reset: screw terminal cable(s) 0.25...0.5 mm² flexible with cable end AWG 26...AWG 16
Detector: screw terminal cable(s) 0.14...1 mm² flexible AWG 26...AWG 16
Detector: screw terminal cable(s) 0.14...1.5 mm² rigid AWG 26...AWG 16
Detector: screw terminal cable(s) 0.25...0.5 mm² flexible with cable end AWG 26...AWG 16
Presence of voltage: screw terminal cable(s) 0.2...2.5 mm² flexible AWG 24...AWG 12
Presence of voltage: screw terminal cable(s) 0.2...2.5 mm² 4 mm² rigid AWG 24...AWG 12
Voltage presence: screw terminal cable(s) 0.25...2.5 mm² flexible with cable end AWG 24...AWG 12
settings protection Protected by sealable cover
width (w) 54 mm
mechanical robustness Fire resistance conforming to IEC 60695-2-1
Protection IK 2 joules: IK07 conforming to EN 50102
Vibrations 13.2 to 100 Hz: 0.7 g
Vibrations 2 to 13.2 Hz: +/- 1 mm
surveillance Electronics (continuous)
Power supply (continuous)
Relay/detector link (continuous)
function test Local
Remote Test
wire stripping length 7 mm for top connection auxiliary power supply:
8 mm for bottom connection error:
5 mm for bottom connection relay test and fault reset:
5 mm for top connection detector:
8 mm for bottom connection voltage presence:
depth 74 mm
mounting bracket DIN rail
type of setting Selector
Environment
degree of pollution 3 conforming to IEC 60664-1
ip degree of protection IP40 on front face: conforming to EN/IEC 60529
IP30 on sides: conforming to EN/IEC 60529
IP20 on connection terminals: conforming to EN/IEC 60529
class of protection against electric shock Class II
electromagnetic compatibility Conducted and radiated emissions: ,B conforming to CISPR 11 Conducted
radio frequency immunity test: ,3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test: ,4 conforming to IEC 6100 -4-11
Disturbance transmitted by conduction at high energy: ,4 conforming to IEC 61000-4-5
Disturbance transmitted by conduction at low energy: ,4 conforming to IEC 61000-4-4
Radiated disturbance: ,3 conforming to IEC 61000-4-3
overvoltage category IV
relative humidity 95% at 55°C
shock resistance ik IK07 conforming to EN 50102
operating ambient air temperature -35…70 °C
storage room temperature -55…85 °C
KKK ja hinna lisateave

Võta meiega ühendust

Professionaalne elektriseadmete müük Eestis, Lätis, Leedus ja Soomes. Sertifitseeritud madalpinge komponendid, kaitselülitid, kontaktorid ja tööstusautomaatika lahendused. Sama päeva hinnapakkumised ja kiire tarne Baltikumis ja Soomes

Baltelec
+372 5326 4976

E–R 9:00–17:00

info@baltelec.ee

Vastame 2 tunni jooksul

56193 on lahendus kategooriast Kaitsereleed, mis on mõeldud suurettevõtetele. BaltElec tegeleb hulgimüügi ja distributsiooniga Eestis, Lätis, Leedus ja Soomes.

  • Originaal Schneider Electric toode, vastavusdokumendid päringu alusel.
  • Mahupõhine hinnastus – küsi pakkumist suuremate koguste jaoks (võimalik, et sätestame MOQ).
  • Kiire tarne Baltikumis ning Soomes; koostöö logistikapartneritega.
  • Tehniline tugi ja ettepanekud sobivuse kohta vastavalt Sinu rakendusele.

Hind: Küsi projektipakkumist. Hind sõltub kogusest, tarne- ja maksetingimustest.

KKK tootele 56193 - Schneider Electric

Hiljuti vaadatud
56193 - Schneider Electric
Jääkvoolu jälgimise relee, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz, DIN rööpale paigaldatav.
160,89 € KM-ta
199,50 € KM-ga
Tellimisel